Credits

Walchand College of Engineering (WCE), Sangli
Shweta Patil has created this Calculator and 1000+ more calculators!
Indian Institute of Information Technology (IIIT), Bhopal
Mridul Sharma has verified this Calculator and 1000+ more calculators!

Edge length of Oloid given surface to volume ratio Solution

STEP 0: Pre-Calculation Summary
Formula Used
edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio))
a = ((4/3)*pi)*((4*pi)/(3.052418*RAV))
This formula uses 1 Constants, 1 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Surface to Volume Ratio - Surface to Volume Ratio is fraction of surface to volume. (Measured in Hundred)
STEP 1: Convert Input(s) to Base Unit
Surface to Volume Ratio: 0.5 Hundred --> 0.5 Hundred No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = ((4/3)*pi)*((4*pi)/(3.052418*RAV)) --> ((4/3)*pi)*((4*pi)/(3.052418*0.5))
Evaluating ... ...
a = 34.4893066016144
STEP 3: Convert Result to Output's Unit
34.4893066016144 Meter -->3448.93066016144 Centimeter (Check conversion here)
FINAL ANSWER
3448.93066016144 Centimeter <-- Edge length
(Calculation completed in 00.000 seconds)

6 Edge length of Oloid Calculators

Edge length of Oloid given surface area
edge_length = ((4/3)*pi)*(sqrt(Surface Area/(4*pi))) Go
Edge length of Oloid given surface to volume ratio
edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio)) Go
Edge length of Oloid given volume
edge_length = ((4/3)*pi)*((Volume/3.052418)^(1/3)) Go
Edge length of Oloid given length
edge_length = ((4/3)*pi)*(Length/3) Go
Edge length of Oloid given height
edge_length = ((4/3)*pi)*(Height/2) Go
Edge length of Oloid given radius of one circle
edge_length = ((4/3)*pi)*Radius Go

Edge length of Oloid given surface to volume ratio Formula

edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio))
a = ((4/3)*pi)*((4*pi)/(3.052418*RAV))

What is Oloid?

An oloid is a three-dimensional curved geometric object that was discovered by Paul Schatz in 1929. It is the convex hull of a skeletal frame made by placing two linked congruent circles in perpendicular planes, so that the center of each circle lies on the edge of the other circle. The distance between the circle centers equals the radius of the circles. One third of each circle's perimeter lies inside the convex hull, so the same shape may be also formed as the convex hull of the two remaining circular arcs each spanning an angle of 4π/3.

How to Calculate Edge length of Oloid given surface to volume ratio?

Edge length of Oloid given surface to volume ratio calculator uses edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio)) to calculate the Edge length, The Edge length of Oloid given surface to volume ratio formula is defined as a line connecting vertices of Oloid. Edge length and is denoted by a symbol.

How to calculate Edge length of Oloid given surface to volume ratio using this online calculator? To use this online calculator for Edge length of Oloid given surface to volume ratio, enter Surface to Volume Ratio (RAV) and hit the calculate button. Here is how the Edge length of Oloid given surface to volume ratio calculation can be explained with given input values -> 3448.931 = ((4/3)*pi)*((4*pi)/(3.052418*0.5)).

FAQ

What is Edge length of Oloid given surface to volume ratio?
The Edge length of Oloid given surface to volume ratio formula is defined as a line connecting vertices of Oloid and is represented as a = ((4/3)*pi)*((4*pi)/(3.052418*RAV)) or edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio)). Surface to Volume Ratio is fraction of surface to volume.
How to calculate Edge length of Oloid given surface to volume ratio?
The Edge length of Oloid given surface to volume ratio formula is defined as a line connecting vertices of Oloid is calculated using edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio)). To calculate Edge length of Oloid given surface to volume ratio, you need Surface to Volume Ratio (RAV). With our tool, you need to enter the respective value for Surface to Volume Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Edge length?
In this formula, Edge length uses Surface to Volume Ratio. We can use 6 other way(s) to calculate the same, which is/are as follows -
  • edge_length = ((4/3)*pi)*Radius
  • edge_length = ((4/3)*pi)*(Length/3)
  • edge_length = ((4/3)*pi)*(Height/2)
  • edge_length = ((4/3)*pi)*(sqrt(Surface Area/(4*pi)))
  • edge_length = ((4/3)*pi)*((Volume/3.052418)^(1/3))
  • edge_length = ((4/3)*pi)*((4*pi)/(3.052418*Surface to Volume Ratio))
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!