Electric Current using Real Power Solution

STEP 0: Pre-Calculation Summary
Formula Used
Current = Real Power/(Voltage*cos(Phase Difference))
I = P/(V*cos(Φ))
This formula uses 1 Functions, 4 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Current - (Measured in Ampere) - Current or AC is an electric current which periodically reverses direction and changes its magnitude continuously with time in contrast to direct current which flows only in one direction.
Real Power - (Measured in Watt) - The Real Power P is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load.
Voltage - (Measured in Volt) - Voltage is used to determine the value of the potential difference between terminals where alternating current flows.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
STEP 1: Convert Input(s) to Base Unit
Real Power: 235 Watt --> 235 Watt No Conversion Required
Voltage: 130 Volt --> 130 Volt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
I = P/(V*cos(Φ)) --> 235/(130*cos(0.5235987755982))
Evaluating ... ...
I = 2.08734328091634
STEP 3: Convert Result to Output's Unit
2.08734328091634 Ampere --> No Conversion Required
FINAL ANSWER
2.08734328091634 2.087343 Ampere <-- Current
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

Current Calculators

Electric Current using Reactive Power
​ Go Current = Reactive Power/(Voltage*sin(Phase Difference))
Electric Current using Real Power
​ Go Current = Real Power/(Voltage*cos(Phase Difference))
Current using Power Factor
​ Go Current = Real Power/(Power Factor*Voltage)
Current using Complex Power
​ Go Current = sqrt(Complex Power/Impedance)

AC Circuit Design Calculators

Capacitance for Parallel RLC Circuit using Q Factor
​ Go Capacitance = (Inductance*Parallel RLC Quality Factor^2)/Resistance^2
Capacitance for Series RLC Circuit given Q Factor
​ Go Capacitance = Inductance/(Series RLC Quality Factor^2*Resistance^2)
Capacitance given Cut off Frequency
​ Go Capacitance = 1/(2*Resistance*pi*Cut-off Frequency)
Capacitance using Time Constant
​ Go Capacitance = Time Constant/Resistance

Electric Current using Real Power Formula

Current = Real Power/(Voltage*cos(Phase Difference))
I = P/(V*cos(Φ))

What is the difference between real power and reactive power?

​​Real Power is equal to the Reactive Power i.e. there is no VAr in DC Circuits. Only Real Power exists. There is no Reactive Power in DC circuits due to the zero phase angle (Φ) between current and voltage. Real power is important to produce heat and utilize the electric and magnetic field generated by Reactive Power.

How to Calculate Electric Current using Real Power?

Electric Current using Real Power calculator uses Current = Real Power/(Voltage*cos(Phase Difference)) to calculate the Current, Electric Current using Real Power is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. Current is denoted by I symbol.

How to calculate Electric Current using Real Power using this online calculator? To use this online calculator for Electric Current using Real Power, enter Real Power (P), Voltage (V) & Phase Difference (Φ) and hit the calculate button. Here is how the Electric Current using Real Power calculation can be explained with given input values -> 2.087343 = 235/(130*cos(0.5235987755982)).

FAQ

What is Electric Current using Real Power?
Electric Current using Real Power is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space and is represented as I = P/(V*cos(Φ)) or Current = Real Power/(Voltage*cos(Phase Difference)). The Real Power P is the average power in watts delivered to a load. It is the only useful power. It is the actual power dissipated by the load, Voltage is used to determine the value of the potential difference between terminals where alternating current flows & Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
How to calculate Electric Current using Real Power?
Electric Current using Real Power is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space is calculated using Current = Real Power/(Voltage*cos(Phase Difference)). To calculate Electric Current using Real Power, you need Real Power (P), Voltage (V) & Phase Difference (Φ). With our tool, you need to enter the respective value for Real Power, Voltage & Phase Difference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Current?
In this formula, Current uses Real Power, Voltage & Phase Difference. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Current = sqrt(Complex Power/Impedance)
  • Current = Real Power/(Power Factor*Voltage)
  • Current = Reactive Power/(Voltage*sin(Phase Difference))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!