Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film Calculator

✖Latent Heat of Vaporization is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure.ⓘ Latent Heat of Vaporization [h_fg]			+10% -10%
✖Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.ⓘ Specific Heat Capacity [c]			+10% -10%
✖Saturation temperature is the temperature at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given pressure.ⓘ Saturation Temperature [T_Sat]			+10% -10%
✖Plate Surface Temperature is the temperature at the surface of the plate.ⓘ Plate Surface Temperature [T_w]			+10% -10%

✖Corrected Latent Heat of Vaporization is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure.ⓘ Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film [h'_fg]

⎘ Copy

👎

Formula

✖

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film

Formula

`"h'"_{"fg"} = ("h"_{"fg"}+0.68*"c"*("T"_{"Sat"}-"T"_{"w"}))`

Example

`"3.1E^6J/kg"=("2260000J/kg"+0.68*"4184J/(kg*K)"*("373K"-"82K"))`

Calculator

LaTeX

Reset

👍

Download Condensation Formulas PDF

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film Solution

STEP 0: Pre-Calculation Summary

Formula Used

Corrected Latent Heat of Vaporization = (Latent Heat of Vaporization+0.68*Specific Heat Capacity*(Saturation Temperature-Plate Surface Temperature))
h'_fg = (h_fg+0.68*c*(T_Sat-T_w))
This formula uses 5 Variables

Variables Used

Corrected Latent Heat of Vaporization - (Measured in Joule per Kilogram) - Corrected Latent Heat of Vaporization is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure.
Latent Heat of Vaporization - (Measured in Joule per Kilogram) - Latent Heat of Vaporization is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure.
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Saturation Temperature - (Measured in Kelvin) - Saturation temperature is the temperature at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given pressure.
Plate Surface Temperature - (Measured in Kelvin) - Plate Surface Temperature is the temperature at the surface of the plate.

STEP 1: Convert Input(s) to Base Unit

Latent Heat of Vaporization: 2260000 Joule per Kilogram --> 2260000 Joule per Kilogram No Conversion Required
Specific Heat Capacity: 4184 Joule per Kilogram per K --> 4184 Joule per Kilogram per K No Conversion Required
Saturation Temperature: 373 Kelvin --> 373 Kelvin No Conversion Required
Plate Surface Temperature: 82 Kelvin --> 82 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h'_fg = (h_fg+0.68*c*(T_Sat-T_w)) --> (2260000+0.68*4184*(373-82))

Evaluating ... ...

h'_fg = 3087929.92

STEP 3: Convert Result to Output's Unit

3087929.92 Joule per Kilogram --> No Conversion Required

FINAL ANSWER

3087929.92 ≈ 3.1E+6 Joule per Kilogram <-- Corrected Latent Heat of Vaporization

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Heat Transfer » Boiling and Condensation » Condensation » Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 22 Condensation Calculators

Average Heat Transfer Coefficient for Condensation Inside Horizontal Tubes for Low Vapor Velocity

Go Average Heat Transfer Coefficient = 0.555*((Density of Liquid Film*(Density of Liquid Film-Density of Vapor)*[g]*Corrected Latent Heat of Vaporization*(Thermal Conductivity of Film Condensate^3))/(Length of Plate*Diameter of Tube*(Saturation Temperature-Plate Surface Temperature)))^(0.25)

Average Heat Transfer Coefficient for Laminar Film Condensation on Outside of Sphere

Go Average Heat Transfer Coefficient = 0.815*((Density of Liquid Film*(Density of Liquid Film-Density of Vapor)*[g]*Latent Heat of Vaporization*(Thermal Conductivity of Film Condensate^3))/(Diameter of Sphere*Viscosity of Film*(Saturation Temperature-Plate Surface Temperature)))^(0.25)

Average Heat Transfer Coefficient for Laminar Film Condensation of Tube

Go Average Heat Transfer Coefficient = 0.725*((Density of Liquid Film*(Density of Liquid Film-Density of Vapor)*[g]*Latent Heat of Vaporization*(Thermal Conductivity of Film Condensate^3))/(Diameter of Tube*Viscosity of Film*(Saturation Temperature-Plate Surface Temperature)))^(0.25)

Average Heat Transfer Coefficient for Vapor Condensing on Plate

Go Average Heat Transfer Coefficient = 0.943*((Density of Liquid Film*(Density of Liquid Film-Density of Vapor)*[g]*Latent Heat of Vaporization*(Thermal Conductivity of Film Condensate^3))/(Length of Plate*Viscosity of Film*(Saturation Temperature-Plate Surface Temperature)))^(0.25)

Average Heat Transfer Coefficient for Film Condensation on Plate for Wavy Laminar Flow

Go Average Heat Transfer Coefficient = 1.13*((Density of Liquid Film*(Density of Liquid Film-Density of Vapor)*[g]*Latent Heat of Vaporization*(Thermal Conductivity of Film Condensate^3))/(Length of Plate*Viscosity of Film*(Saturation Temperature-Plate Surface Temperature)))^(0.25)

Film Thickness in Film Condensation

Go Film Thickness = ((4*Viscosity of Film*Thermal Conductivity*Height of Film*(Saturation Temperature-Plate Surface Temperature))/([g]*Latent Heat of Vaporization*(Density of Liquid)*(Density of Liquid-Density of Vapor)))^(0.25)

Condensation Number given Reynolds Number

Go Condensation Number = ((Constant for Condensation Number)^(4/3))*(((4*sin(Inclination Angle)*((Cross Sectional Area of Flow/Wetted Perimeter)))/(Length of Plate))^(1/3))*((Reynolds Number of Film)^(-1/3))

Condensation Number

Go Condensation Number = (Average Heat Transfer Coefficient)*((((Viscosity of Film)^2)/((Thermal Conductivity^3)*(Density of Liquid Film)*(Density of Liquid Film-Density of Vapor)*[g]))^(1/3))

Reynolds Number using Average Heat Transfer Coefficient for Condensate Film

Go Reynolds Number of Film = ((4*Average Heat Transfer Coefficient*Length of Plate*(Saturation Temperature-Plate Surface Temperature))/(Latent Heat of Vaporization*Viscosity of Film))

Film Thickness given Mass Flow of Condensate

Go Film Thickness = ((3*Viscosity of Film*Mass Flow Rate)/(Density of Liquid*(Density of Liquid-Density of Vapor)*[g]))^(1/3)

Average Heat Transfer Coefficient given Reynolds Number and Properties at Film Temperature

Go Average Heat Transfer Coefficient = (0.026*(Prandtl Number at Film Temperature^(1/3))*(Reynolds Number for Mixing^(0.8))*(Thermal Conductivity at Film Temperature))/Diameter of Tube

Mass Flow of Condensate through any X Position of Film

Go Mass Flow Rate = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Viscosity of Film)

Viscosity of Film given Mass Flow of Condensate

Go Viscosity of Film = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Mass Flow Rate)

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film

Go Corrected Latent Heat of Vaporization = (Latent Heat of Vaporization+0.68*Specific Heat Capacity*(Saturation Temperature-Plate Surface Temperature))

Heat Transfer Rate for Condensation of Superheated Vapors

Go Heat Transfer = Average Heat Transfer Coefficient*Area of Plate*(Saturation Temperature for Superheated Vapor-Plate Surface Temperature)

Wetted Perimeter given Reynolds Number of Film

Go Wetted Perimeter = (4*Mass Flow of Condensate)/(Reynolds Number of Film*Viscosity of Fluid)

Reynolds Number for Condensate Film

Go Reynolds Number of Film = (4*Mass Flow of Condensate)/(Wetted Perimeter*Viscosity of Fluid)

Viscosity of Film given Reynolds Number of Film

Go Viscosity of Film = (4*Mass Flow of Condensate)/(Wetted Perimeter*Reynolds Number of Film)

Mass Flow Rate through Particular Section of Condensate Film given Reynolds Number of Film

Go Mass Flow of Condensate = (Reynolds Number of Film*Wetted Perimeter*Viscosity of Fluid)/4

Condensation Number when Turbulence is Encountered in Film

Go Condensation Number = 0.0077*((Reynolds Number of Film)^(0.4))

Condensation Number for Horizontal Cylinder

Go Condensation Number = 1.514*((Reynolds Number of Film)^(-1/3))

Condensation Number for Vertical Plate

Go Condensation Number = 1.47*((Reynolds Number of Film)^(-1/3))

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film Formula

Corrected Latent Heat of Vaporization = (Latent Heat of Vaporization+0.68*Specific Heat Capacity*(Saturation Temperature-Plate Surface Temperature))
h'_fg = (h_fg+0.68*c*(T_Sat-T_w))

What is Heat Transfer?

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.

Define Thermal Conductivity & Factors affecting it?

Thermal conductivity is defined as the ability of a substance to conduct heat. Factors Affecting The Thermal Conductivity are: Moisture, Density of material, Pressure, Temperature & Structure of material.

How to Calculate Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film?

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film calculator uses Corrected Latent Heat of Vaporization = (Latent Heat of Vaporization+0.68*Specific Heat Capacity*(Saturation Temperature-Plate Surface Temperature)) to calculate the Corrected Latent Heat of Vaporization, Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film formula is defined as the sum of old latent heat and additional energy to cool the film below the saturation temperature. It is the function of latent heat of vaporization, specific heat capacity, saturation temperature and plate surface temperature. Corrected Latent Heat of Vaporization is denoted by h'_fg symbol.

How to calculate Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film using this online calculator? To use this online calculator for Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film, enter Latent Heat of Vaporization (h_fg), Specific Heat Capacity (c), Saturation Temperature (T_Sat) & Plate Surface Temperature (T_w) and hit the calculate button. Here is how the Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film calculation can be explained with given input values -> 3.1E+6 = (2260000+0.68*4184*(373-82)).

FAQ

What is Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film?

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film formula is defined as the sum of old latent heat and additional energy to cool the film below the saturation temperature. It is the function of latent heat of vaporization, specific heat capacity, saturation temperature and plate surface temperature and is represented as h'_fg = (h_fg+0.68*c*(T_Sat-T_w)) or Corrected Latent Heat of Vaporization = (Latent Heat of Vaporization+0.68*Specific Heat Capacity*(Saturation Temperature-Plate Surface Temperature)). Latent Heat of Vaporization is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure, Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount, Saturation temperature is the temperature at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given pressure & Plate Surface Temperature is the temperature at the surface of the plate.

How to calculate Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film?

Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film formula is defined as the sum of old latent heat and additional energy to cool the film below the saturation temperature. It is the function of latent heat of vaporization, specific heat capacity, saturation temperature and plate surface temperature is calculated using Corrected Latent Heat of Vaporization = (Latent Heat of Vaporization+0.68*Specific Heat Capacity*(Saturation Temperature-Plate Surface Temperature)). To calculate Heat Transfer Coefficient for Condensation on Flat Plate for Nonlinear Temperature Profile in Film, you need Latent Heat of Vaporization (h_fg), Specific Heat Capacity (c), Saturation Temperature (T_Sat) & Plate Surface Temperature (T_w). With our tool, you need to enter the respective value for Latent Heat of Vaporization, Specific Heat Capacity, Saturation Temperature & Plate Surface Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search