Equation for Total Drawdown at Well Calculator

✖Well Constant C1 for the well under consideration influences the concerned hydrological processes.ⓘ Well Constant C1 [C₁]			+10% -10%
✖Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.ⓘ Discharge [Q]			+10% -10%
✖Well Constant C2 for the well under consideration influences the concerned hydrological processes.ⓘ Well Constant C2 [C₂]			+10% -10%

✖Formation Losses are usually linked to overdraft discharge, unsafe yield, land subsidence, environmental degradation, and poor performance of the system under investigation.ⓘ Equation for Total Drawdown at Well [s_wL]

⎘ Copy

👎

Formula

✖

Equation for Total Drawdown at Well

Formula

`"s"_{"wL"} = "C"_{"1"}*"Q"+"C"_{"2"}*"Q"^2`

Example

`"30.45"="10"*"3.0m³/s"+"0.05"*("3.0m³/s")^2`

Calculator

LaTeX

Reset

👍

Download Engineering Hydrology Formula PDF

Equation for Total Drawdown at Well Solution

STEP 0: Pre-Calculation Summary

Formula Used

Formation Losses = Well Constant C1*Discharge+Well Constant C2*Discharge^2
s_wL = C₁*Q+C₂*Q^2
This formula uses 4 Variables

Variables Used

Formation Losses - Formation Losses are usually linked to overdraft discharge, unsafe yield, land subsidence, environmental degradation, and poor performance of the system under investigation.
Well Constant C1 - Well Constant C1 for the well under consideration influences the concerned hydrological processes.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Well Constant C2 - Well Constant C2 for the well under consideration influences the concerned hydrological processes.

STEP 1: Convert Input(s) to Base Unit

Well Constant C1: 10 --> No Conversion Required
Discharge: 3 Cubic Meter per Second --> 3 Cubic Meter per Second No Conversion Required
Well Constant C2: 0.05 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s_wL = C₁*Q+C₂*Q^2 --> 10*3+0.05*3^2

Evaluating ... ...

s_wL = 30.45

STEP 3: Convert Result to Output's Unit

30.45 --> No Conversion Required

FINAL ANSWER

30.45 <-- Formation Losses

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Well Loss » Equation for Total Drawdown at Well

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< 3 Well Loss Calculators

Equation for Total Drawdown at Well

Go Formation Losses = Well Constant C1*Discharge+Well Constant C2*Discharge^2

Equation for Formation Loss

Go Formation Losses = Well Constant C1*Discharge

Equation for Well Loss

Go Well loss = Well Constant C2*Discharge^2

Equation for Total Drawdown at Well Formula

Formation Losses = Well Constant C1*Discharge+Well Constant C2*Discharge^2
s_wL = C₁*Q+C₂*Q^2

What is Discharge In Hydrology?

Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material in addition to the water itself.

How to Calculate Equation for Total Drawdown at Well?

Equation for Total Drawdown at Well calculator uses Formation Losses = Well Constant C1*Discharge+Well Constant C2*Discharge^2 to calculate the Formation Losses, The Equation for Total Drawdown at Well is defined as total change in groundwater level due to applied stress, caused by events such as: Pumping from well. Pumping from neighboring well. Formation Losses is denoted by s_wL symbol.

How to calculate Equation for Total Drawdown at Well using this online calculator? To use this online calculator for Equation for Total Drawdown at Well, enter Well Constant C1 (C₁), Discharge (Q) & Well Constant C2 (C₂) and hit the calculate button. Here is how the Equation for Total Drawdown at Well calculation can be explained with given input values -> 30.45 = 10*3+0.05*3^2.

FAQ

What is Equation for Total Drawdown at Well?

The Equation for Total Drawdown at Well is defined as total change in groundwater level due to applied stress, caused by events such as: Pumping from well. Pumping from neighboring well and is represented as s_wL = C₁*Q+C₂*Q^2 or Formation Losses = Well Constant C1*Discharge+Well Constant C2*Discharge^2. Well Constant C1 for the well under consideration influences the concerned hydrological processes, Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material & Well Constant C2 for the well under consideration influences the concerned hydrological processes.

How to calculate Equation for Total Drawdown at Well?

The Equation for Total Drawdown at Well is defined as total change in groundwater level due to applied stress, caused by events such as: Pumping from well. Pumping from neighboring well is calculated using Formation Losses = Well Constant C1*Discharge+Well Constant C2*Discharge^2. To calculate Equation for Total Drawdown at Well, you need Well Constant C1 (C₁), Discharge (Q) & Well Constant C2 (C₂). With our tool, you need to enter the respective value for Well Constant C1, Discharge & Well Constant C2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Formation Losses?

In this formula, Formation Losses uses Well Constant C1, Discharge & Well Constant C2. We can use 1 other way(s) to calculate the same, which is/are as follows -

Formation Losses = Well Constant C1*Discharge

Home

FREE PDFs

🔍 Search