Factor of safety for ductile materials Solution

STEP 0: Pre-Calculation Summary
Formula Used
Factor of Safety = Tensile Yield Strength for Static Load/Allowable Stress for Static Load
fs = σstatic load/σal
This formula uses 3 Variables
Variables Used
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
Tensile Yield Strength for Static Load - (Measured in Pascal) - Tensile Yield Strength for Static Load is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Allowable Stress for Static Load - (Measured in Pascal) - Allowable Stress for Static Load is also known as working load and is the ratio of tensile strength and factor of safety.
STEP 1: Convert Input(s) to Base Unit
Tensile Yield Strength for Static Load: 85 Newton per Square Millimeter --> 85000000 Pascal (Check conversion here)
Allowable Stress for Static Load: 45 Newton per Square Millimeter --> 45000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
fs = σstatic loadal --> 85000000/45000000
Evaluating ... ...
fs = 1.88888888888889
STEP 3: Convert Result to Output's Unit
1.88888888888889 --> No Conversion Required
FINAL ANSWER
1.88888888888889 1.888889 <-- Factor of Safety
(Calculation completed in 00.004 seconds)

Credits

Created by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has created this Calculator and 600+ more calculators!
Verified by Sagar S Kulkarni
Dayananda Sagar College of Engineering (DSCE), Bengaluru
Sagar S Kulkarni has verified this Calculator and 200+ more calculators!

6 Design for Brittle and Ductile Material under Static Load Calculators

Factor of safety for ductile materials
Go Factor of Safety = Tensile Yield Strength for Static Load/Allowable Stress for Static Load
Allowable stress for ductile material
Go Allowable Stress for Static Load = Tensile Yield Strength for Static Load/Factor of Safety
Yield strength for ductile materials
Go Tensile Yield Strength for Static Load = Allowable Stress for Static Load*Factor of Safety
Ultimate tensile strength for brittle materials
Go Ultimate Tensile Strength = Allowable Stress for Static Load*Factor of Safety
Factor of safety for brittle materials
Go Factor of Safety = Ultimate Tensile Strength/Allowable Stress for Static Load
Allowable stress for brittle material
Go Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety

Factor of safety for ductile materials Formula

Factor of Safety = Tensile Yield Strength for Static Load/Allowable Stress for Static Load
fs = σstatic load/σal

What is factor of safety and why is it required?

There are always approximations in engineering calculations. Hence, the allowed stress is kept less than failure stress, and the ratio of failure stress to allowed stress is called factor of safety.

How to Calculate Factor of safety for ductile materials?

Factor of safety for ductile materials calculator uses Factor of Safety = Tensile Yield Strength for Static Load/Allowable Stress for Static Load to calculate the Factor of Safety, The Factor of safety for ductile materials formula is defined as the ratio of ultimate tensile strength and allowable stress. It is the required margin of safety for a structure or component according to code, law, or design requirements. In this case, the failure stress is equal to tensile yield stress. Factor of Safety is denoted by fs symbol.

How to calculate Factor of safety for ductile materials using this online calculator? To use this online calculator for Factor of safety for ductile materials, enter Tensile Yield Strength for Static Load static load) & Allowable Stress for Static Load al) and hit the calculate button. Here is how the Factor of safety for ductile materials calculation can be explained with given input values -> 1.888889 = 85000000/45000000.

FAQ

What is Factor of safety for ductile materials?
The Factor of safety for ductile materials formula is defined as the ratio of ultimate tensile strength and allowable stress. It is the required margin of safety for a structure or component according to code, law, or design requirements. In this case, the failure stress is equal to tensile yield stress and is represented as fs = σstatic loadal or Factor of Safety = Tensile Yield Strength for Static Load/Allowable Stress for Static Load. Tensile Yield Strength for Static Load is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions & Allowable Stress for Static Load is also known as working load and is the ratio of tensile strength and factor of safety.
How to calculate Factor of safety for ductile materials?
The Factor of safety for ductile materials formula is defined as the ratio of ultimate tensile strength and allowable stress. It is the required margin of safety for a structure or component according to code, law, or design requirements. In this case, the failure stress is equal to tensile yield stress is calculated using Factor of Safety = Tensile Yield Strength for Static Load/Allowable Stress for Static Load. To calculate Factor of safety for ductile materials, you need Tensile Yield Strength for Static Load static load) & Allowable Stress for Static Load al). With our tool, you need to enter the respective value for Tensile Yield Strength for Static Load & Allowable Stress for Static Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Factor of Safety?
In this formula, Factor of Safety uses Tensile Yield Strength for Static Load & Allowable Stress for Static Load. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Factor of Safety = Ultimate Tensile Strength/Allowable Stress for Static Load
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!