Feed in Slab Milling given Feed Speed Calculator

✖Feed Speed is the Feed given against a workpiece per unit time.ⓘ Feed Speed [V_f]			+10% -10%
✖The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.ⓘ Frequency of Reciprocating Strokes [n_r]			+10% -10%

✖Feed Rate is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed in Slab Milling given Feed Speed [f]

⎘ Copy

👎

Formula

✖

Feed in Slab Milling given Feed Speed

Formula

`"f" = "V"_{"f"}/"n"_{"r"}`

Example

`"83.33333mm/rev"="0.1m/s"/"1.2Hz"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Feed in Slab Milling given Feed Speed Solution

STEP 0: Pre-Calculation Summary

Formula Used

Feed Rate = Feed Speed/Frequency of Reciprocating Strokes
f = V_f/n_r
This formula uses 3 Variables

Variables Used

Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Feed Speed - (Measured in Meter per Second) - Feed Speed is the Feed given against a workpiece per unit time.
Frequency of Reciprocating Strokes - (Measured in Hertz) - The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.

STEP 1: Convert Input(s) to Base Unit

Feed Speed: 0.1 Meter per Second --> 0.1 Meter per Second No Conversion Required
Frequency of Reciprocating Strokes: 1.2 Hertz --> 1.2 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = V_f/n_r --> 0.1/1.2

Evaluating ... ...

f = 0.0833333333333333

STEP 3: Convert Result to Output's Unit

0.0833333333333333 Meter Per Revolution -->83.3333333333333 Millimeter Per Revolution (Check conversion here)

FINAL ANSWER

83.3333333333333 ≈ 83.33333 Millimeter Per Revolution <-- Feed Rate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Milling Operation » Slab and Slide Milling » Feed in Slab Milling given Feed Speed

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 10+ Slab and Slide Milling Calculators

Maximum Chip Thickness obtained in Slab Milling using Depth of Cut

Go Maximum Chip Thickness = 2*Feed Speed*sqrt(Depth of Cut/Diameter of Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency)

Maximum Chip Thickness obtained in Slab Milling using Tool Engagement Angle

Go Maximum Chip Thickness = Feed Speed*sin(Tool Engagement Angle)/(Number of Teeth on Cutting Tool*Rotational Frequency)

Diameter of Tool given Proportion of Edge Engagement for Slab and Side Milling

Go Diameter of A Cutting Tool For Slab = 2*Work Engagement/(sin((Time Proportion of Cutting Edge Engagement-0.25)*2*pi)+1)

Work Engagement given Proportion of Edge Engagement for Slab and Side Milling

Go Work Engagement = (sin((Time Proportion of Cutting Edge Engagement-0.25)*2*pi)+1)*Diameter of A Cutting Tool For Slab/2

Proportion of Cutting Edge Engagement for Slab and Side Milling

Go Time Proportion of Cutting Edge Engagement = 0.25+(asin((2*Work Engagement/Diameter of A Cutting Tool)-1)/(2*pi))

Minimum Length of Approach required in Slab Milling

Go Length of Approach = sqrt(Depth of Cut*(Diameter of Cutting Tool-Depth of Cut))

Tool Engagement Angle in Slab Milling using Depth of Cut

Go Tool Engagement Angle = acos(1-(2*Depth of Cut/Diameter of Cutting Tool))

Depth of Cut in Slab Milling using Tool Engagement Angle

Go Depth of Cut = (1-cos(Tool Engagement Angle))*Diameter of Cutting Tool/2

Feed Speed of Workpiece in Slab Milling

Go Feed Speed = Feed Rate*Frequency of Reciprocating Strokes

Feed in Slab Milling given Feed Speed

Go Feed Rate = Feed Speed/Frequency of Reciprocating Strokes

Feed in Slab Milling given Feed Speed Formula

Feed Rate = Feed Speed/Frequency of Reciprocating Strokes
f = V_f/n_r

Feed per Tooth in Milling?

Feed per Tooth is defined as the rate of Cut provided by a single tooth on the Milling Cutter in one revolution.
The Feed Rate in Milling Operation is given as the feed of all teeth combined in one revolution

How to Calculate Feed in Slab Milling given Feed Speed?

Feed in Slab Milling given Feed Speed calculator uses Feed Rate = Feed Speed/Frequency of Reciprocating Strokes to calculate the Feed Rate, The Feed in Slab Milling given Feed Speed is a method to determine the Feed Rate obtained when a workpiece is machined under a given Feed Speed and Cutting Frequency. Feed Rate is denoted by f symbol.

How to calculate Feed in Slab Milling given Feed Speed using this online calculator? To use this online calculator for Feed in Slab Milling given Feed Speed, enter Feed Speed (V_f) & Frequency of Reciprocating Strokes (n_r) and hit the calculate button. Here is how the Feed in Slab Milling given Feed Speed calculation can be explained with given input values -> 83333.33 = 0.1/1.2.

FAQ

What is Feed in Slab Milling given Feed Speed?

The Feed in Slab Milling given Feed Speed is a method to determine the Feed Rate obtained when a workpiece is machined under a given Feed Speed and Cutting Frequency and is represented as f = V_f/n_r or Feed Rate = Feed Speed/Frequency of Reciprocating Strokes. Feed Speed is the Feed given against a workpiece per unit time & The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.

How to calculate Feed in Slab Milling given Feed Speed?

The Feed in Slab Milling given Feed Speed is a method to determine the Feed Rate obtained when a workpiece is machined under a given Feed Speed and Cutting Frequency is calculated using Feed Rate = Feed Speed/Frequency of Reciprocating Strokes. To calculate Feed in Slab Milling given Feed Speed, you need Feed Speed (V_f) & Frequency of Reciprocating Strokes (n_r). With our tool, you need to enter the respective value for Feed Speed & Frequency of Reciprocating Strokes and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search