Feed per Tooth Calculator

↳

⤿

✖Feed is the rate at which a cutter moves through material.ⓘ Feed [F_cutter]			+10% -10%
✖The Number of teeth value is defined as the number of teeth (which mesh with another compatible toothed part to transmit or convert torque and speed) on a specimen or part under consideration.ⓘ Number of teeth [z]			+10% -10%
✖Spindle Speed is the speed of machine tool spindle given in revolutions per minute.ⓘ Spindle Speed [N]			+10% -10%

✖Feed per Tooth is defined as the amount of work piece entering the machining per tooth.ⓘ Feed per Tooth [f]

⎘ Copy

👎

Formula

✖

Feed per Tooth

Formula

`"f" = "F"_{"cutter"}/("z"*"N")`

Example

`"0.000186mm"="12.7mm"/("23"*"28308rev/min")`

Calculator

LaTeX

Reset

👍

Download Material Science and Metallurgy Formula PDF

Feed per Tooth Solution

STEP 0: Pre-Calculation Summary

Formula Used

Feed per Tooth = Feed/(Number of teeth*Spindle Speed)
f = F_cutter/(z*N)
This formula uses 4 Variables

Variables Used

Feed per Tooth - (Measured in Meter) - Feed per Tooth is defined as the amount of work piece entering the machining per tooth.
Feed - (Measured in Meter) - Feed is the rate at which a cutter moves through material.
Number of teeth - The Number of teeth value is defined as the number of teeth (which mesh with another compatible toothed part to transmit or convert torque and speed) on a specimen or part under consideration.
Spindle Speed - (Measured in Radian per Second) - Spindle Speed is the speed of machine tool spindle given in revolutions per minute.

STEP 1: Convert Input(s) to Base Unit

Feed: 12.7 Millimeter --> 0.0127 Meter (Check conversion here)
Number of teeth: 23 --> No Conversion Required
Spindle Speed: 28308 Revolution per Minute --> 2964.40682777637 Radian per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = F_cutter/(z*N) --> 0.0127/(23*2964.40682777637)

Evaluating ... ...

f = 1.86267926476768E-07

STEP 3: Convert Result to Output's Unit

1.86267926476768E-07 Meter -->0.000186267926476768 Millimeter (Check conversion here)

FINAL ANSWER

0.000186267926476768 ≈ 0.000186 Millimeter <-- Feed per Tooth

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Material Science and Metallurgy » Parameters » Feed per Tooth

Credits

Created by Abhinav Gupta

Defence institute of advanced technology (DRDO) (DIAT), pune

Abhinav Gupta has created this Calculator and 10+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 5 Parameters Calculators

Linear Thermal Expansion

Go Change in Length = Coefficient of Thermal Expansion*Length of Bar*Difference in Temperature

Spindle Speed

Go Spindle Speed = Cutting Speed*1000/(pi*Diameter of Cutting Tool)

Feed per Tooth

Go Feed per Tooth = Feed/(Number of teeth*Spindle Speed)

Theoretical Density

Go Theoretical density = Total Volume of Unit Cell/Mass of Atom

Poisson Ratio

Go Poisson's Ratio = Lateral Strain/Longitudinal Strain

Feed per Tooth Formula

Feed per Tooth = Feed/(Number of teeth*Spindle Speed)
f = F_cutter/(z*N)

How to calculate feed per tooth in 1 mm?

Chip load per tooth is the appropriate amount of material that one cutting edge of the tool should remove in a single revolution. This is measured in Inches Per Tooth (IPT). Chip load per tool is the appropriate amount of material removed by all cutting edges on a tool in a single revolution.

Is feed per tooth the same as chip load?

Chip Load or Feed Per Tooth is the theoretical length of material that is fed into each cutting edge as it moves through the work material. Chip Load given by tool manufacturers is the distance the material is moved into the cutter at the centreline of the tool as each cutting edge rotates through to cutting.

How to Calculate Feed per Tooth?

Feed per Tooth calculator uses Feed per Tooth = Feed/(Number of teeth*Spindle Speed) to calculate the Feed per Tooth, The feed per tooth formula is defined as the amount of workpiece entering the machine for machining in inches or mm. Feed per Tooth is denoted by f symbol.

How to calculate Feed per Tooth using this online calculator? To use this online calculator for Feed per Tooth, enter Feed (F_cutter), Number of teeth (z) & Spindle Speed (N) and hit the calculate button. Here is how the Feed per Tooth calculation can be explained with given input values -> 8.788121 = 0.0127/(23*2964.40682777637).

FAQ

What is Feed per Tooth?

The feed per tooth formula is defined as the amount of workpiece entering the machine for machining in inches or mm and is represented as f = F_cutter/(z*N) or Feed per Tooth = Feed/(Number of teeth*Spindle Speed). Feed is the rate at which a cutter moves through material, The Number of teeth value is defined as the number of teeth (which mesh with another compatible toothed part to transmit or convert torque and speed) on a specimen or part under consideration & Spindle Speed is the speed of machine tool spindle given in revolutions per minute.

How to calculate Feed per Tooth?

The feed per tooth formula is defined as the amount of workpiece entering the machine for machining in inches or mm is calculated using Feed per Tooth = Feed/(Number of teeth*Spindle Speed). To calculate Feed per Tooth, you need Feed (F_cutter), Number of teeth (z) & Spindle Speed (N). With our tool, you need to enter the respective value for Feed, Number of teeth & Spindle Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search