Feed to Workpiece given Machining Time Calculator

✖Length of Workpiece is the measurement or extent of Workpiece from end to end in the direction of Cut.ⓘ Length of Workpiece [L]			+10% -10%
✖Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.ⓘ Machining Time [t_m]			+10% -10%
✖Rotational Frequency of Spindle is the number of turns made by the spindle of the Machine for cutting in one second.ⓘ Rotational Frequency of Spindle [n_s]			+10% -10%

✖The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.ⓘ Feed to Workpiece given Machining Time [f]

⎘ Copy

👎

Formula

✖

Feed to Workpiece given Machining Time

Formula

`"f" = "L"/("t"_{"m"}*"n"_{"s"})`

Example

`"0.888889mm"="0.4m"/("0.75min"*"10Hz")`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Feed to Workpiece given Machining Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Feed = Length of Workpiece/(Machining Time*Rotational Frequency of Spindle)
f = L/(t_m*n_s)
This formula uses 4 Variables

Variables Used

Feed - (Measured in Meter) - The Feed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.
Length of Workpiece - (Measured in Meter) - Length of Workpiece is the measurement or extent of Workpiece from end to end in the direction of Cut.
Machining Time - (Measured in Second) - Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.
Rotational Frequency of Spindle - (Measured in Hertz) - Rotational Frequency of Spindle is the number of turns made by the spindle of the Machine for cutting in one second.

STEP 1: Convert Input(s) to Base Unit

Length of Workpiece: 0.4 Meter --> 0.4 Meter No Conversion Required
Machining Time: 0.75 Minute --> 45 Second (Check conversion here)
Rotational Frequency of Spindle: 10 Hertz --> 10 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = L/(t_m*n_s) --> 0.4/(45*10)

Evaluating ... ...

f = 0.000888888888888889

STEP 3: Convert Result to Output's Unit

0.000888888888888889 Meter -->0.888888888888889 Millimeter (Check conversion here)

FINAL ANSWER

0.888888888888889 ≈ 0.888889 Millimeter <-- Feed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Design for Machining » Accuracy and Surface Finish » Feed to Workpiece given Machining Time

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< 9 Accuracy and Surface Finish Calculators

Rotational Frequency of Workpiece given Roughness

Go Rotational Frequency of Spindle = 0.18*Length of Workpiece/(Machining Time*((The Corner radius of tool*Roughness Value)^0.5))

Machining Time for Workpiece given Roughness

Go Machining Time = 0.18*Length of Workpiece/(Rotational Frequency of Spindle*((The Corner radius of tool*Roughness Value)^0.5))

Surface Roughness of Workpiece given Machining Time

Go Roughness Value = ((0.18*Length of Workpiece/(Rotational Frequency of Spindle*Machining Time))^2)/The Corner radius of tool

Corner Radius of Tool given Machining Time

Go The Corner radius of tool = ((0.18*Length of Workpiece/(Rotational Frequency of Spindle*Machining Time))^2)/Roughness Value

Length of Workpiece given Roughness

Go Length of Workpiece = Machining Time*Rotational Frequency of Spindle*((The Corner radius of tool*Roughness Value)^0.5)/0.18

Machining Time for Workpiece given Machining Conditions

Go Machining Time = Length of Workpiece/(Feed*Rotational Frequency of Spindle)

Rotational Frequency of Workpiece given Machining Time

Go Rotational Frequency of Spindle = Length of Workpiece/(Machining Time*Feed)

Feed to Workpiece given Machining Time

Go Feed = Length of Workpiece/(Machining Time*Rotational Frequency of Spindle)

Length of Workpiece given Machining Time

Go Length of Workpiece = Machining Time*Feed*Rotational Frequency of Spindle

Feed to Workpiece given Machining Time Formula

Feed = Length of Workpiece/(Machining Time*Rotational Frequency of Spindle)
f = L/(t_m*n_s)

How does Feed Rate affect surface finish?

The surface roughness is directly influenced by the spindle speed and feed rate. It is observed that the surface roughness increases with increased feed rate and is higher at lower speeds and vice versa for all feed rates.

How to Calculate Feed to Workpiece given Machining Time?

Feed to Workpiece given Machining Time calculator uses Feed = Length of Workpiece/(Machining Time*Rotational Frequency of Spindle) to calculate the Feed, The Feed to Workpiece given Machining Time is a method to determine the velocity at which the cutter is fed advanced against the workpiece when the Machining Time is known. Feed is denoted by f symbol.

How to calculate Feed to Workpiece given Machining Time using this online calculator? To use this online calculator for Feed to Workpiece given Machining Time, enter Length of Workpiece (L), Machining Time (t_m) & Rotational Frequency of Spindle (n_s) and hit the calculate button. Here is how the Feed to Workpiece given Machining Time calculation can be explained with given input values -> 888.8889 = 0.4/(45*10).

FAQ

What is Feed to Workpiece given Machining Time?

The Feed to Workpiece given Machining Time is a method to determine the velocity at which the cutter is fed advanced against the workpiece when the Machining Time is known and is represented as f = L/(t_m*n_s) or Feed = Length of Workpiece/(Machining Time*Rotational Frequency of Spindle). Length of Workpiece is the measurement or extent of Workpiece from end to end in the direction of Cut, Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material & Rotational Frequency of Spindle is the number of turns made by the spindle of the Machine for cutting in one second.

How to calculate Feed to Workpiece given Machining Time?

The Feed to Workpiece given Machining Time is a method to determine the velocity at which the cutter is fed advanced against the workpiece when the Machining Time is known is calculated using Feed = Length of Workpiece/(Machining Time*Rotational Frequency of Spindle). To calculate Feed to Workpiece given Machining Time, you need Length of Workpiece (L), Machining Time (t_m) & Rotational Frequency of Spindle (n_s). With our tool, you need to enter the respective value for Length of Workpiece, Machining Time & Rotational Frequency of Spindle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search