Filling Current Velocity given Density Influence Calculator

✖Length of Harbor dependent upon the filling current component.ⓘ Length of Harbor [L]			+10% -10%
✖Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.ⓘ Density Influence [α_D]			+10% -10%
✖Time Interval over which the Density Difference exists.ⓘ Time Interval [T_D]			+10% -10%
✖Density Current Velocity dependent upon the filling current component.ⓘ Density Current Velocity [V_D]			+10% -10%

✖Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude.ⓘ Filling Current Velocity given Density Influence [V_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Density Currents in Harbors Formulas PDF PDF Image

Filling Current Velocity given Density Influence Solution

STEP 0: Pre-Calculation Summary

Formula Used

Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity)
V_f = -((2*L*α_D/T_D)-V_D)
This formula uses 5 Variables

Variables Used

Filling Current Velocity - (Measured in Meter per Second) - Filling Current Velocity dependent upon the filling current component are horizontal movements which range in magnitude.
Length of Harbor - (Measured in Meter) - Length of Harbor dependent upon the filling current component.
Density Influence - Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.
Time Interval - (Measured in Second) - Time Interval over which the Density Difference exists.
Density Current Velocity - (Measured in Meter per Second) - Density Current Velocity dependent upon the filling current component.

STEP 1: Convert Input(s) to Base Unit

Length of Harbor: 180 Meter --> 180 Meter No Conversion Required
Density Influence: 6.5 --> No Conversion Required
Time Interval: 130 Second --> 130 Second No Conversion Required
Density Current Velocity: 25 Meter per Second --> 25 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_f = -((2*L*α_D/T_D)-V_D) --> -((2*180*6.5/130)-25)

Evaluating ... ...

V_f = 7

STEP 3: Convert Result to Output's Unit

7 Meter per Second --> No Conversion Required

FINAL ANSWER

7 Meter per Second <-- Filling Current Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Density Currents in Harbors » Density Influence » Filling Current Velocity given Density Influence

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Density Influence Calculators

Filling Current Velocity given Density Influence

LaTeX Go Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity)

Time Interval over which Density Difference exists given Density Influence

LaTeX Go Time Interval = (2*Length of Harbor*Density Influence)/(Density Current Velocity-Filling Current Velocity)

Length of Harbor given Density Influence

LaTeX Go Length of Harbor = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Density Influence)

Density Influence

LaTeX Go Density Influence = (Density Current Velocity-Filling Current Velocity)*Time Interval/(2*Length of Harbor)

Filling Current Velocity given Density Influence Formula

LaTeX Go

Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity)
V_f = -((2*L*α_D/T_D)-V_D)

What is Density Current?

Density Current is defined as current that is produced by differences in density. Where a flow of sea water has a greater density than that of the water surrounding it, the denser water will dive beneath the less dense water. The density of sea water is affected by temperature, salinity, and the content of suspended sediment.

How to Calculate Filling Current Velocity given Density Influence?

Filling Current Velocity given Density Influence calculator uses Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity) to calculate the Filling Current Velocity, The Filling Current Velocity given Density Influence formula is defined as relating density influence which is not independent of harbour filling but is dependent upon the filling current component as well. Filling Current Velocity is denoted by V_f symbol.

How to calculate Filling Current Velocity given Density Influence using this online calculator? To use this online calculator for Filling Current Velocity given Density Influence, enter Length of Harbor (L), Density Influence (α_D), Time Interval (T_D) & Density Current Velocity (V_D) and hit the calculate button. Here is how the Filling Current Velocity given Density Influence calculation can be explained with given input values -> 7 = -((2*180*6.5/130)-25).

FAQ

What is Filling Current Velocity given Density Influence?

The Filling Current Velocity given Density Influence formula is defined as relating density influence which is not independent of harbour filling but is dependent upon the filling current component as well and is represented as V_f = -((2*L*α_D/T_D)-V_D) or Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity). Length of Harbor dependent upon the filling current component, Density Influence influencing Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume, Time Interval over which the Density Difference exists & Density Current Velocity dependent upon the filling current component.

How to calculate Filling Current Velocity given Density Influence?

The Filling Current Velocity given Density Influence formula is defined as relating density influence which is not independent of harbour filling but is dependent upon the filling current component as well is calculated using Filling Current Velocity = -((2*Length of Harbor*Density Influence/Time Interval)-Density Current Velocity). To calculate Filling Current Velocity given Density Influence, you need Length of Harbor (L), Density Influence (α_D), Time Interval (T_D) & Density Current Velocity (V_D). With our tool, you need to enter the respective value for Length of Harbor, Density Influence, Time Interval & Density Current Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search