Fluorosence Intensity at Low Concentration of Solute Calculator

⤿

Physical spectroscopy

Gaseous state

Vapour Pressure

⤿

Emission Spectroscopy

Absorption Spectroscopy

Raman spectroscopy

Rotational Spectroscopy

Vibrational Spectroscopy

⤿

Fluoroscence and Phosphorescence

Quantum Yield and Singlet Llifetime

✖Fluorosecence Quantum Yield is a measure of the efficiency of photon emission as defined by the ratio of the number of photons emitted to the number of photons absorbed.ⓘ Fluorosecence Quantum Yield [φ_f]			+10% -10%
✖Initial Intensity flux of radiant energy is the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy.ⓘ Initial Intensity [Io]			+10% -10%
✖Spectroscopical Molar Extinction Coefficient a measure of how strongly a chemical species or substance absorbs light at a particular wavelength.ⓘ Spectroscopical Molar Extinction Coefficient [ξ]			+10% -10%
✖The Concentration at Time t is the amount of species formed or reacted in that particular time.ⓘ Concentration at Time t [C_t]			+10% -10%
✖Length is the measurement or extent of something from end to end.ⓘ Length [L]			+10% -10%

✖Fluorosence Intensity at Low Concentration is the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy.ⓘ Fluorosence Intensity at Low Concentration of Solute [I_LC]

⎘ Copy

👎

Formula

✖

Fluorosence Intensity at Low Concentration of Solute

Formula

`"I"_{"LC"} = "φ"_{"f"}*"Io"*2.303*"ξ"*"C"_{"t"}*"L"`

Example

`"1.7E^6W/m²"="6.2E^-6"*"500W/m²"*2.303*"100000m²/mol"*"0.8mol/L"*"3m"`

Calculator

LaTeX

Reset

👍

Download Physical Chemistry Formula PDF PDF Image

Fluorosence Intensity at Low Concentration of Solute Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fluorosence Intensity at Low Concentration = Fluorosecence Quantum Yield*Initial Intensity*2.303*Spectroscopical Molar Extinction Coefficient*Concentration at Time t*Length
I_LC = φ_f*Io*2.303*ξ*C_t*L
This formula uses 6 Variables

Variables Used

Fluorosence Intensity at Low Concentration - (Measured in Watt per Square Meter) - Fluorosence Intensity at Low Concentration is the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy.
Fluorosecence Quantum Yield - Fluorosecence Quantum Yield is a measure of the efficiency of photon emission as defined by the ratio of the number of photons emitted to the number of photons absorbed.
Initial Intensity - (Measured in Watt per Square Meter) - Initial Intensity flux of radiant energy is the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy.
Spectroscopical Molar Extinction Coefficient - (Measured in Square Meter per Mole) - Spectroscopical Molar Extinction Coefficient a measure of how strongly a chemical species or substance absorbs light at a particular wavelength.
Concentration at Time t - (Measured in Mole per Cubic Meter) - The Concentration at Time t is the amount of species formed or reacted in that particular time.
Length - (Measured in Meter) - Length is the measurement or extent of something from end to end.

STEP 1: Convert Input(s) to Base Unit

Fluorosecence Quantum Yield: 6.2E-06 --> No Conversion Required
Initial Intensity: 500 Watt per Square Meter --> 500 Watt per Square Meter No Conversion Required
Spectroscopical Molar Extinction Coefficient: 100000 Square Meter per Mole --> 100000 Square Meter per Mole No Conversion Required
Concentration at Time t: 0.8 Mole per Liter --> 800 Mole per Cubic Meter (Check conversion here)
Length: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_LC = φ_f*Io*2.303*ξ*C_t*L --> 6.2E-06*500*2.303*100000*800*3

Evaluating ... ...

I_LC = 1713432

STEP 3: Convert Result to Output's Unit

1713432 Watt per Square Meter --> No Conversion Required

FINAL ANSWER

1713432 ≈ 1.7E+6 Watt per Square Meter <-- Fluorosence Intensity at Low Concentration

(Calculation completed in 00.020 seconds)

You are here -

Home » Chemistry » Physical Chemistry » Physical spectroscopy » Emission Spectroscopy » Fluorosence Intensity at Low Concentration of Solute

Credits

Created by Torsha_Paul

University of Calcutta (CU), Kolkata

Torsha_Paul has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 25 Emission Spectroscopy Calculators

Intensity of Fluorescence given Degree of Exciplex Formation

Go Fluorosence Intensity given Degree of Exciplex = Rate Constant of Fluoroscence*Equilibrium Constant for Coordinate Complexes*(1-Degree of Exciplex Formation)/(Rate Constant of Fluoroscence+Rate Constant of Non Radiative Reaction)

Degree of Exciplex Formation

Go Degree of Exciplex Formation = (Equilibrium Constant for Coordinate Complexes*Quencher Concentration given Degree of Exciplex)/(1+(Equilibrium Constant for Coordinate Complexes*Quencher Concentration given Degree of Exciplex))

Fluoroscence Quantum Yield given Phosphorescence Quantum Yield

Go Fluorosecence Quantum Yield given Ph = Phosphosecence Quantum Yield*((Rate Constant of Fluoroscence*Singlet State Concentration)/(Phosphorescence Rate Constant*Concentration of Triplet State))

Fluorosence Intensity at Low Concentration of Solute

Go Fluorosence Intensity at Low Concentration = Fluorosecence Quantum Yield*Initial Intensity*2.303*Spectroscopical Molar Extinction Coefficient*Concentration at Time t*Length

Fluorescence Quantum Yield

Go Quantum Yield of Fluorescence = Rate of Radiative Reaction/(Rate of Radiative Reaction+Rate of Internal Conversion+Rate Constant of Intersystem Crossing+Quenching Constant)

Initial Intensity given Degree of Exciplex Formation

Go Initial Intensity given Degree of Exciplex = Rate Constant of Fluoroscence*Equilibrium Constant for Coordinate Complexes/(Rate Constant of Fluoroscence+Rate Constant of Non Radiative Reaction)

Intensity Ratio

Go Intensity Ratio = 1+(Quencher Concentration given Degree of Exciplex*(Quenching Constant/(Rate Constant of Fluoroscence+Rate Constant of Non Radiative Reaction)))

Quantum Yield of Fluorescence

Go Quantum Yield of Fluorescence = Rate Constant of Fluoroscence/(Rate Constant of Fluoroscence+Rate of Internal Conversion+Rate Constant of Intersystem Crossing)

Singlet Life Time of Radiative Process

Go Singlet Life time of Radiative Process = ((Initial Intensity/Fluorosence Intensity)-1)/(Quenching Constant*Quencher Concentration given Degree of Exciplex)

Fluoroscence Intensity without Quenching

Go Intensity Without Quenching = (Rate Constant of Fluoroscence*Absorption Intensity)/(Rate Constant of Non Radiative Reaction+Rate Constant of Fluoroscence)

Final Intensity using Stern Volmer Equation

Go Final Intensity = Initial Intensity/(1+(Singlet Life time given Degree of Exciplex*Quenching Constant*Quencher Concentration given Degree of Exciplex))

Fluoroscence Intensity

Go Fluorosence Intensity = (Rate Constant of Fluoroscence*Absorption Intensity)/(Rate Constant of Fluoroscence+Rate Constant of Non Radiative Reaction)

Singlet Life Time

Go Singlet Life time = 1/(Rate Constant of Intersystem Crossing+Rate of Radiative Reaction+Rate of Internal Conversion+Quenching Constant)

Collisional Energy Transfer

Go Rate of Collisional Energy Transfer = Quenching Constant*Quencher Concentration given Degree of Exciplex*Singlet State Concentration

Rate of Deactivation

Go Rate of Deactivation = (Rate Constant of Non Radiative Reaction+Rate Constant of Fluoroscence)*Singlet State Concentration

Quenching Concentration given Degree of Exciplex Formation

Go Quencher Concentration given Degree of Exciplex = ((1/(1-Degree of Exciplex Formation))-1)*(1/Equilibrium Constant for Coordinate Complexes)

Quenching Concentration

Go Quencher Concentration = ((Initial Intensity/Fluorosence Intensity)-1)/Stern Volmner Constant

Singlet Life given Degree of Exciplex Formation

Go Singlet Life time given Degree of Exciplex = 1/(Rate Constant of Fluoroscence+Rate Constant of Non Radiative Reaction)

Rate of Phosphorescence

Go Phosphorescence Rate = Phosphorescence Rate Constant*Concentration of Triplet State

Fluorescence Rate Constant

Go Rate Constant of Fluoroscence = Rate of Fluoroscence/Singlet State Concentration

Rate of Activation

Go Rate of Activation = Equilibrium Constant*(1-Degree of Dissociation of Emission)

ISC Rate Constant

Go Rate Constant of ISC = Rate of Intersystem Crossing*Singlet State Concentration

Difference in Acidity between Ground and Excited State

Go Difference in pka = pKa of Excited State-pKa of Ground State

Equilibrium Constant for Exciplex Formation

Go Equilibrium Constant for Coordinate Complexes = 1/(1-Degree of Exciplex Formation)-1

Singlet Radiative Phosphorescence Lifetime

Go Singlet Radiative Phosphorescence Lifetime = 1/Rate of Phosphorescence

Fluorosence Intensity at Low Concentration of Solute Formula

What is the molar extinction coefficient in Beer's law?

Molar extinction coefficient is a measure of how strongly a substance absorbs light at a particular wavelength, and is usually represented by the unit M-1 cm-1 or L mol-1 cm-1. Beer's Law states that molar absorptivity is constant (and the absorbance is proportional to concentration) for a given substance dissolved in a given solute and measured at a given wavelength.

What is the Franck Condon factor?

According to the Franck–Condon principle, the intensity of a vibrational peak in an electronically allowed transition is proportional to the absolute square of the overlap integral of the vibrational wave functions of the initial and final states. This overlap integral is known as the Franck–Condon factor.

How to Calculate Fluorosence Intensity at Low Concentration of Solute?

Fluorosence Intensity at Low Concentration of Solute calculator uses Fluorosence Intensity at Low Concentration = Fluorosecence Quantum Yield*Initial Intensity*2.303*Spectroscopical Molar Extinction Coefficient*Concentration at Time t*Length to calculate the Fluorosence Intensity at Low Concentration, The Fluorosence Intensity at Low Concentration of Solute formula is defined as the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy. Fluorosence Intensity at Low Concentration is denoted by I_LC symbol.

How to calculate Fluorosence Intensity at Low Concentration of Solute using this online calculator? To use this online calculator for Fluorosence Intensity at Low Concentration of Solute, enter Fluorosecence Quantum Yield (φ_f), Initial Intensity (Io), Spectroscopical Molar Extinction Coefficient (ξ), Concentration at Time t (C_t) & Length (L) and hit the calculate button. Here is how the Fluorosence Intensity at Low Concentration of Solute calculation can be explained with given input values -> 1.7E+6 = 6.2E-06*500*2.303*100000*800*3.

FAQ

What is Fluorosence Intensity at Low Concentration of Solute?

The Fluorosence Intensity at Low Concentration of Solute formula is defined as the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy and is represented as I_LC = φ_f*Io*2.303*ξ*C_t*L or Fluorosence Intensity at Low Concentration = Fluorosecence Quantum Yield*Initial Intensity*2.303*Spectroscopical Molar Extinction Coefficient*Concentration at Time t*Length. Fluorosecence Quantum Yield is a measure of the efficiency of photon emission as defined by the ratio of the number of photons emitted to the number of photons absorbed, Initial Intensity flux of radiant energy is the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy, Spectroscopical Molar Extinction Coefficient a measure of how strongly a chemical species or substance absorbs light at a particular wavelength, The Concentration at Time t is the amount of species formed or reacted in that particular time & Length is the measurement or extent of something from end to end.

How to calculate Fluorosence Intensity at Low Concentration of Solute?

The Fluorosence Intensity at Low Concentration of Solute formula is defined as the power transferred per unit area, where the area is measured on the plane perpendicular to the direction of propagation of the energy is calculated using Fluorosence Intensity at Low Concentration = Fluorosecence Quantum Yield*Initial Intensity*2.303*Spectroscopical Molar Extinction Coefficient*Concentration at Time t*Length. To calculate Fluorosence Intensity at Low Concentration of Solute, you need Fluorosecence Quantum Yield (φ_f), Initial Intensity (Io), Spectroscopical Molar Extinction Coefficient (ξ), Concentration at Time t (C_t) & Length (L). With our tool, you need to enter the respective value for Fluorosecence Quantum Yield, Initial Intensity, Spectroscopical Molar Extinction Coefficient, Concentration at Time t & Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search