Force on Plunger given Intensity Calculator

↳

⤿

Flow Characteristics

Draft Tube

Orifices and Mouthpieces

Properties of Surfaces and Solids

Viscous Flow

⤿

Incrompressible Flow

Compressible Flow

Thermodynamics Properties

⤿

Incompressible Flow Characteristics

Assorted Characteristics

✖The Pressure intensity at a point is defined as the external normal force per unit area. The SI unit of pressure is Pascal.ⓘ Pressure Intensity [p_i]			+10% -10%
✖Area of plunger is defined as the area where the force acts equally in all sides so that the weight is lifted by the plunger.ⓘ Area of plunger [a]			+10% -10%

✖Force acting on plunger is defined as the push or pull upon the plunger resulting from the object's interaction with another object.ⓘ Force on Plunger given Intensity [F']

⎘ Copy

👎

Formula

✖

Force on Plunger given Intensity

Formula

`"F'" = "p"_{"i"}*"a"`

Example

`"505N"="10.1Pa"*"50m²"`

Calculator

LaTeX

Reset

👍

Download Fluid Mechanics Formula PDF

Force on Plunger given Intensity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force Acting on Plunger = Pressure Intensity*Area of plunger
F' = p_i*a
This formula uses 3 Variables

Variables Used

Force Acting on Plunger - (Measured in Newton) - Force acting on plunger is defined as the push or pull upon the plunger resulting from the object's interaction with another object.
Pressure Intensity - (Measured in Pascal) - The Pressure intensity at a point is defined as the external normal force per unit area. The SI unit of pressure is Pascal.
Area of plunger - (Measured in Square Meter) - Area of plunger is defined as the area where the force acts equally in all sides so that the weight is lifted by the plunger.

STEP 1: Convert Input(s) to Base Unit

Pressure Intensity: 10.1 Pascal --> 10.1 Pascal No Conversion Required
Area of plunger: 50 Square Meter --> 50 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F' = p_i*a --> 10.1*50

Evaluating ... ...

F' = 505

STEP 3: Convert Result to Output's Unit

505 Newton --> No Conversion Required

FINAL ANSWER

505 Newton <-- Force Acting on Plunger

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Fluid Mechanics » Flow Characteristics » Incrompressible Flow » Incompressible Flow Characteristics » Force on Plunger given Intensity

Credits

Created by Shareef Alex

velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada

Shareef Alex has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 23 Incompressible Flow Characteristics Calculators

Uniform flow velocity for stream function at point in combined flow

Go Uniform Flow Velocity = (Stream Function-(Strength of Source/(2*pi*Angle A)))/(Distance from End A*sin(Angle A))

Stream Function at Point in Combined Flow

Go Stream Function = (Uniform Flow Velocity*Distance from End A*sin(Angle A))+((Strength of Source/(2*pi))*Angle A)

Location of stagnation point on x-axis

Go Distance of Stagnation Point = Distance from End A*sqrt((1+(Strength of Source/(pi*Distance from End A*Uniform Flow Velocity))))

Temperature Lapse Rate given Gas Constant

Go Temperature Lapse Rate = (-Acceleration Due to Gravity/Universal Gas Constant)*((Specific constant-1)/(Specific constant))

Stream function at point

Go Stream Function = -(Strength of Doublet/(2*pi))*(Length y/((Length X^2)+(Length y^2)))

Strength of doublet for stream function

Go Strength of Doublet = -(Stream Function*2*pi*((Length X^2)+(Length y^2)))/Length y

Uniform flow velocity for Rankine half body

Go Uniform Flow Velocity = (Strength of Source/(2*Length y))*(1-(Angle A/pi))

Dimensions of Rankine half-body

Go Length y = (Strength of Source/(2*Uniform Flow Velocity))*(1-(Angle A/pi))

Strength of source for Rankine half body

Go Strength of Source = (Length y*2*Uniform Flow Velocity)/(1-(Angle A/pi))

Pressure Head given Density

Go Pressure Head = Pressure above Atmospheric Pressure/(Density of Fluid*Acceleration Due to Gravity)

Radius of Rankine circle

Go Radius = sqrt(Strength of Doublet/(2*pi*Uniform Flow Velocity))

Pressure at point in piezometer given Mass and Volume

Go Pressure = (Mass of water*Acceleration Due to Gravity*Height of Water above Bottom of Wall)

Height of liquid in piezometer

Go Height of Liquid = Water Pressure/(Water Density*Acceleration Due to Gravity)

Distance of stagnation point S from source in flow past half body

Go Radial Distance = Strength of Source/(2*pi*Uniform Flow Velocity)

Pressure at any point in liquid

Go Pressure = Density*Acceleration Due to Gravity*Pressure Head

Stream function in sink flow for angle

Go Stream Function = (Strength of Source/(2*pi))*(Angle A)

Radius at any point considering radial velocity

Go Radius 1 = Strength of Source/(2*pi*Radial Velocity)

Radial velocity at any radius

Go Radial Velocity = Strength of Source/(2*pi*Radius 1)

Strength of source for radial velocity and at any radius

Go Strength of Source = Radial Velocity*2*pi*Radius 1

Hydrostatic law

Go Weight density = Density of Fluid*Acceleration Due to Gravity

Force on Plunger given Intensity

Go Force Acting on Plunger = Pressure Intensity*Area of plunger

Area of plunger

Go Area of plunger = Force Acting on Plunger/Pressure Intensity

Absolute Pressure given Gauge Pressure

Go Absolute Pressure = Gauge Pressure+Atmospheric Pressure

Force on Plunger given Intensity Formula

Force Acting on Plunger = Pressure Intensity*Area of plunger
F' = p_i*a

What is a example of hydraulic plunger?

Hydraulic elevator having a steel-tube plunger several feet longer than the travel of the car encased in a cylinder sunk into the ground and actuated by water pressure assisted by a counterweight and controlled by valves operated from the car, the water being forced out as the car descends.

What is the function of the plunger?

The plunger displaces the available volume through its own volume and increases the pressure of the fluid to be pumped. The suction valve closes and the pressure valve opens the way into the process area for the pressurized fluid.

How to Calculate Force on Plunger given Intensity?

Force on Plunger given Intensity calculator uses Force Acting on Plunger = Pressure Intensity*Area of plunger to calculate the Force Acting on Plunger, The Force on Plunger given Intensity formula is defined as the product of pressure intensity and area of the plunger. Force Acting on Plunger is denoted by F' symbol.

How to calculate Force on Plunger given Intensity using this online calculator? To use this online calculator for Force on Plunger given Intensity, enter Pressure Intensity (p_i) & Area of plunger (a) and hit the calculate button. Here is how the Force on Plunger given Intensity calculation can be explained with given input values -> 500 = 10.1*50.

FAQ

What is Force on Plunger given Intensity?

The Force on Plunger given Intensity formula is defined as the product of pressure intensity and area of the plunger and is represented as F' = p_i*a or Force Acting on Plunger = Pressure Intensity*Area of plunger. The Pressure intensity at a point is defined as the external normal force per unit area. The SI unit of pressure is Pascal & Area of plunger is defined as the area where the force acts equally in all sides so that the weight is lifted by the plunger.

How to calculate Force on Plunger given Intensity?

The Force on Plunger given Intensity formula is defined as the product of pressure intensity and area of the plunger is calculated using Force Acting on Plunger = Pressure Intensity*Area of plunger. To calculate Force on Plunger given Intensity, you need Pressure Intensity (p_i) & Area of plunger (a). With our tool, you need to enter the respective value for Pressure Intensity & Area of plunger and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search