Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length Calculator

✖Bending Stress in full leaf is the normal bending stress that is induced at a point in extra full-length leaves of a leaf spring.ⓘ Bending Stress in full leaf [σ_bf]			+10% -10%
✖Number of Full length Leaves is defined as the total number of extra full length leaves present in a multi-leaf spring.ⓘ Number of Full length Leaves [n_f]			+10% -10%
✖Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.ⓘ Width of Leaf [b]			+10% -10%
✖Thickness of Leaf is defined as the thickness of each leaf present in a multi-leaf spring.ⓘ Thickness of Leaf [t]			+10% -10%
✖The Length of Cantilever of Leaf Spring is defined as half the length of a semi-elliptic spring.ⓘ Length of Cantilever of Leaf Spring [L]			+10% -10%

✖Force Taken by Full Length Leaves is defined as the portion of Force that is taken by extra full length leaves.ⓘ Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length [P_f]

⎘ Copy

👎

Formula

✖

Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length

Formula

`"P"_{"f"} = ("σ"_{"b"}"f")*"n"_{"f"}*"b"*"t"^2/(6*"L")`

Example

`"6998.4N"="450N/mm²"*"3"*"108mm"*("12mm")^2/(6*"500mm")`

Calculator

LaTeX

Reset

👍

Download Design of Automobile Elements Formula PDF

Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length Solution

STEP 0: Pre-Calculation Summary

Formula Used

Force Taken by Full Length Leaves = Bending Stress in full leaf*Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring)
P_f = σ_bf*n_f*b*t^2/(6*L)
This formula uses 6 Variables

Variables Used

Force Taken by Full Length Leaves - (Measured in Newton) - Force Taken by Full Length Leaves is defined as the portion of Force that is taken by extra full length leaves.
Bending Stress in full leaf - (Measured in Pascal) - Bending Stress in full leaf is the normal bending stress that is induced at a point in extra full-length leaves of a leaf spring.
Number of Full length Leaves - Number of Full length Leaves is defined as the total number of extra full length leaves present in a multi-leaf spring.
Width of Leaf - (Measured in Meter) - Width of Leaf is defined as the width of each leaf present in a multi-leaf spring.
Thickness of Leaf - (Measured in Meter) - Thickness of Leaf is defined as the thickness of each leaf present in a multi-leaf spring.
Length of Cantilever of Leaf Spring - (Measured in Meter) - The Length of Cantilever of Leaf Spring is defined as half the length of a semi-elliptic spring.

STEP 1: Convert Input(s) to Base Unit

Bending Stress in full leaf: 450 Newton per Square Millimeter --> 450000000 Pascal (Check conversion here)
Number of Full length Leaves: 3 --> No Conversion Required
Width of Leaf: 108 Millimeter --> 0.108 Meter (Check conversion here)
Thickness of Leaf: 12 Millimeter --> 0.012 Meter (Check conversion here)
Length of Cantilever of Leaf Spring: 500 Millimeter --> 0.5 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_f = σ_bf*n_f*b*t^2/(6*L) --> 450000000*3*0.108*0.012^2/(6*0.5)

Evaluating ... ...

P_f = 6998.4

STEP 3: Convert Result to Output's Unit

6998.4 Newton --> No Conversion Required

FINAL ANSWER

6998.4 Newton <-- Force Taken by Full Length Leaves

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Springs » Multi-Leaf Spring » Force Taken By Leaves » Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< 11 Force Taken By Leaves Calculators

Force Taken by Graduated length leaves given Deflection at Load Point

Go Force Taken by Graduated Length Leaves = Deflection of graduated leaf at load point*Modulus of Elasticity of Spring*Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^3/(6*Length of Cantilever of Leaf Spring^3)

Force applied at end of Spring given Bending Stress on Graduated length leaves

Go Force Applied at End of Leaf Spring = Bending Stress in graduated leaf*(3*Number of Full length Leaves+2*Number of Graduated Length Leaves)*Width of Leaf*Thickness of Leaf^2/(12*Length of Cantilever of Leaf Spring)

Force taken by Graduated length leaves given Bending Stress in Plate

Go Force Taken by Graduated Length Leaves = Bending Stress in graduated leaf*Number of Graduated Length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring)

Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length

Go Force Taken by Full Length Leaves = Bending Stress in full leaf*Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring)

Force Applied at End of Spring given Force Taken by Graduated length Leaves

Go Force Applied at End of Leaf Spring = Force Taken by Graduated Length Leaves*(3*Number of Full length Leaves+2*Number of Graduated Length Leaves)/(2*Number of Graduated Length Leaves)

Force Taken by Graduated Length Leaves in Terms of Force Applied at End of Spring

Go Force Taken by Graduated Length Leaves = 2*Number of Graduated Length Leaves*Force Applied at End of Leaf Spring/(3*Number of Full length Leaves+2*Number of Graduated Length Leaves)

Force taken by Extra Full length leaves given Number of leaves

Go Force Taken by Full Length Leaves = Force Taken by Graduated Length Leaves*3*Number of Full length Leaves/(2*Number of Graduated Length Leaves)

Force Taken by Graduated length leaves given Number of Leaves

Go Force Taken by Graduated Length Leaves = 2*Force Taken by Full Length Leaves*Number of Graduated Length Leaves/(3*Number of Full length Leaves)

Force taken by graduated length leaves given force applied at end of spring

Go Force Taken by Graduated Length Leaves = Force Applied at End of Leaf Spring-Force Taken by Full Length Leaves

Force Taken by Full length Leaves given Force at end of Spring

Go Force Taken by Full Length Leaves = Force Applied at End of Leaf Spring-Force Taken by Graduated Length Leaves

Force applied at end of Leaf Spring

Go Force Applied at End of Leaf Spring = Force Taken by Graduated Length Leaves+Force Taken by Full Length Leaves

Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length Formula

Force Taken by Full Length Leaves = Bending Stress in full leaf*Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring)
P_f = σ_bf*n_f*b*t^2/(6*L)

Define Bending Stress?

Bending stress is the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued. Bending stress occurs when operating industrial equipment and in concrete and metallic structures when they are subjected to a tensile load.

How to Calculate Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length?

Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length calculator uses Force Taken by Full Length Leaves = Bending Stress in full leaf*Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring) to calculate the Force Taken by Full Length Leaves, The Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length formula is defined as portion of force taken by the extra full length leaves . Force Taken by Full Length Leaves is denoted by P_f symbol.

How to calculate Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length using this online calculator? To use this online calculator for Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length, enter Bending Stress in full leaf (σ_bf), Number of Full length Leaves (n_f), Width of Leaf (b), Thickness of Leaf (t) & Length of Cantilever of Leaf Spring (L) and hit the calculate button. Here is how the Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length calculation can be explained with given input values -> 6998.4 = 450000000*3*0.108*0.012^2/(6*0.5).

FAQ

What is Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length?

The Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length formula is defined as portion of force taken by the extra full length leaves and is represented as P_f = σ_bf*n_f*b*t^2/(6*L) or Force Taken by Full Length Leaves = Bending Stress in full leaf*Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring). Bending Stress in full leaf is the normal bending stress that is induced at a point in extra full-length leaves of a leaf spring, Number of Full length Leaves is defined as the total number of extra full length leaves present in a multi-leaf spring, Width of Leaf is defined as the width of each leaf present in a multi-leaf spring, Thickness of Leaf is defined as the thickness of each leaf present in a multi-leaf spring & The Length of Cantilever of Leaf Spring is defined as half the length of a semi-elliptic spring.

How to calculate Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length?

The Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length formula is defined as portion of force taken by the extra full length leaves is calculated using Force Taken by Full Length Leaves = Bending Stress in full leaf*Number of Full length Leaves*Width of Leaf*Thickness of Leaf^2/(6*Length of Cantilever of Leaf Spring). To calculate Force Taken by Full Length Leaves given Bending Stress in Plate Extra Full Length, you need Bending Stress in full leaf (σ_bf), Number of Full length Leaves (n_f), Width of Leaf (b), Thickness of Leaf (t) & Length of Cantilever of Leaf Spring (L). With our tool, you need to enter the respective value for Bending Stress in full leaf, Number of Full length Leaves, Width of Leaf, Thickness of Leaf & Length of Cantilever of Leaf Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Force Taken by Full Length Leaves?

In this formula, Force Taken by Full Length Leaves uses Bending Stress in full leaf, Number of Full length Leaves, Width of Leaf, Thickness of Leaf & Length of Cantilever of Leaf Spring. We can use 2 other way(s) to calculate the same, which is/are as follows -

Force Taken by Full Length Leaves = Force Taken by Graduated Length Leaves*3*Number of Full length Leaves/(2*Number of Graduated Length Leaves)
Force Taken by Full Length Leaves = Force Applied at End of Leaf Spring-Force Taken by Graduated Length Leaves

Home

FREE PDFs

🔍 Search