G11 Parameter given Current-1 (G-Parameter) Solution

STEP 0: Pre-Calculation Summary
Formula Used
G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1
g11 = (I1-(g12*I2))/V1
This formula uses 5 Variables
Variables Used
G11 Parameter - (Measured in Siemens) - G11 Parameter is input admittance.
Current in Port 1 - (Measured in Ampere) - Current in port 1 is the magnitude of current flowing through port 1.
G12 Parameter - G12 Parameter is short circuit current ratio.
Current in Port 2 - (Measured in Ampere) - Current in port 2 is the magnitude of current flowing through port 2.
Voltage Port 1 - (Measured in Volt) - Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
STEP 1: Convert Input(s) to Base Unit
Current in Port 1: 0.8 Ampere --> 0.8 Ampere No Conversion Required
G12 Parameter: 0.505 --> No Conversion Required
Current in Port 2: 1.02 Ampere --> 1.02 Ampere No Conversion Required
Voltage Port 1: 440 Volt --> 440 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
g11 = (I1-(g12*I2))/V1 --> (0.8-(0.505*1.02))/440
Evaluating ... ...
g11 = 0.0006475
STEP 3: Convert Result to Output's Unit
0.0006475 Siemens -->0.0006475 Mho (Check conversion here)
FINAL ANSWER
0.0006475 0.000648 Mho <-- G11 Parameter
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

16 G-Parameters Calculators

G12 Parameter given Current-1 (G-Parameter)
Go G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2
G11 Parameter given Current-1 (G-Parameter)
Go G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1
Current-1 (G-Parameter)
Go Current in Port 1 = (G11 Parameter*Voltage Port 1)+(G12 Parameter*Current in Port 2)
Current-2 given Voltage-2 (G-Parameter)
Go Current in Port 2 = (Voltage Port 2-(G21 Parameter*Voltage Port 1))/G22 Parameter
G12 Parameter (G-Parameter)
Go G12 Parameter = Current in Port 1/Current in Port 2
Current-1 given G11 Parameter (G-Parameter)
Go Current in Port 1 = Voltage Port 1*G11 Parameter
G11 Parameter (G-Parameter)
Go G11 Parameter = Current in Port 1/Voltage Port 1
Delta-G given A' Parameter
Go Delta-G = (-1)*G12 Parameter*A Inverse Parameter
G21 Parameter (G-Parameter)
Go G21 Parameter = Voltage Port 2/Voltage Port 1
G21 Parameter in Terms of Y Parameters
Go G21 Parameter = -Y21 Parameter/Y22 Parameter
G21 Parameter in Terms of Z Parameters
Go G21 Parameter = Z21 Parameter/Z11 Parameter
G11 Parameter in Terms of T Parameters
Go G11 Parameter = C Parameter/A Parameter
G22 Parameter in Terms of Z Parameters
Go G22 Parameter = Delta-Z/Z11 Parameter
G11 Parameter in Terms of Y Parameters
Go G11 Parameter = Delta-Y/Y22 Parameter
G22 Parameter in Terms of Y Parameters
Go G22 Parameter = 1/Y22 Parameter
G21 Parameter in Terms of T Parameters
Go G21 Parameter = 1/A Parameter

G11 Parameter given Current-1 (G-Parameter) Formula

G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1
g11 = (I1-(g12*I2))/V1

What is inverse hybrid parameter?

We will get the set of two equations by considering the variables I1 & V2 as dependent and V1 & I2 as independent. The coefficients of independent variables, V1 and I2 are called g-parameters. g-parameters are called inverse hybrid parameters.

How to Calculate G11 Parameter given Current-1 (G-Parameter)?

G11 Parameter given Current-1 (G-Parameter) calculator uses G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1 to calculate the G11 Parameter, The G11 Parameter given Current-1 (G-parameter) formula is defined as the input admittance of a two-port network of the inverse hybrid parameters. G11 Parameter is denoted by g11 symbol.

How to calculate G11 Parameter given Current-1 (G-Parameter) using this online calculator? To use this online calculator for G11 Parameter given Current-1 (G-Parameter), enter Current in Port 1 (I1), G12 Parameter (g12), Current in Port 2 (I2) & Voltage Port 1 (V1) and hit the calculate button. Here is how the G11 Parameter given Current-1 (G-Parameter) calculation can be explained with given input values -> 0.000648 = (0.8-(0.505*1.02))/440.

FAQ

What is G11 Parameter given Current-1 (G-Parameter)?
The G11 Parameter given Current-1 (G-parameter) formula is defined as the input admittance of a two-port network of the inverse hybrid parameters and is represented as g11 = (I1-(g12*I2))/V1 or G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1. Current in port 1 is the magnitude of current flowing through port 1, G12 Parameter is short circuit current ratio, Current in port 2 is the magnitude of current flowing through port 2 & Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
How to calculate G11 Parameter given Current-1 (G-Parameter)?
The G11 Parameter given Current-1 (G-parameter) formula is defined as the input admittance of a two-port network of the inverse hybrid parameters is calculated using G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1. To calculate G11 Parameter given Current-1 (G-Parameter), you need Current in Port 1 (I1), G12 Parameter (g12), Current in Port 2 (I2) & Voltage Port 1 (V1). With our tool, you need to enter the respective value for Current in Port 1, G12 Parameter, Current in Port 2 & Voltage Port 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate G11 Parameter?
In this formula, G11 Parameter uses Current in Port 1, G12 Parameter, Current in Port 2 & Voltage Port 1. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • G11 Parameter = Current in Port 1/Voltage Port 1
  • G11 Parameter = Delta-Y/Y22 Parameter
  • G11 Parameter = C Parameter/A Parameter
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!