## G22 Parameter (G-Parameter) Solution

STEP 0: Pre-Calculation Summary
Formula Used
G22 Parameter = Voltage Port 2/Current in Port 2
g22 = V2/I2
This formula uses 3 Variables
Variables Used
G22 Parameter - (Measured in Ohm) - G22 Parameter is input impedance.
Voltage Port 2 - (Measured in Volt) - Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
Current in Port 2 - (Measured in Ampere) - Current in port 2 is the magnitude of current flowing through port 2.
STEP 1: Convert Input(s) to Base Unit
Voltage Port 2: 220 Volt --> 220 Volt No Conversion Required
Current in Port 2: 1.02 Ampere --> 1.02 Ampere No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
g22 = V2/I2 --> 220/1.02
Evaluating ... ...
g22 = 215.686274509804
STEP 3: Convert Result to Output's Unit
215.686274509804 Ohm --> No Conversion Required
215.686274509804 215.6863 Ohm <-- G22 Parameter
(Calculation completed in 00.004 seconds)
You are here -
Home »

## Credits

Created by Ganesh Dahiwal
Veermata Jijabai Technological Institute (VJTI), Mumbai,Maharashtra
Ganesh Dahiwal has created this Calculator and 4 more calculators!
Verified by Aman Dhussawat
GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI
Aman Dhussawat has verified this Calculator and 25+ more calculators!

## < 24 Two Port Parameters Calculators

D Inverse Parameter (A'B'C'D'-Parameter)
D Inverse Parameter = -Current in Port 2/Current in Port 1
B Inverse Parameter (A'B'C'D'-Parameter)
B Inverse Parameter = -Voltage Port 2/Current in Port 1
C Inverse Parameter (A'B'C'D'-Parameter)
C Inverse Parameter = Current in Port 2/Voltage Port 1
A-Inverse Parameter (A'B'C'D'-Parameter)
A Inverse Parameter = Voltage Port 2/Voltage Port 1
H21 Parameter (H-Parameter)
H21 Parameter = Current in Port 2/Current in Port 1
G12 Parameter (G-Parameter)
G12 Parameter = Current in Port 1/Current in Port 2
D Parameter (ABCD Parameter)
D Parameter = -Current in Port 1/Current in Port 2
B Parameter (ABCD Parameter)
B Parameter = Voltage Port 1/(-Current in Port 2)
Y22 Parameter = Current in Port 2/Voltage Port 2
Driving Point Output Impedance (Z22)
Z22 Parameter = Voltage Port 2/Current in Port 2
Y11 Parameter = Current in Port 1/Voltage Port 1
Driving Point Input Impedance (Z11)
Z11 Parameter = Voltage Port 1/Current in Port 1
Y21 Parameter = Current in Port 2/Voltage Port 1
Output Transfer Impedance (Z21)
Z21 Parameter = Voltage Port 2/Current in Port 1
Y12 Parameter = Current in Port 1/Voltage Port 2
Input Transfer Impedance (Z12)
Z12 Parameter = Voltage Port 1/Current in Port 2
H11 Parameter (H-Parameter)
H11 Parameter = Voltage Port 1/Current in Port 1
H22 Parameter (H-Parameter)
H22 Parameter = Current in Port 2/Voltage Port 2
G11 Parameter (G-Parameter)
G11 Parameter = Current in Port 1/Voltage Port 1
G22 Parameter (G-Parameter)
G22 Parameter = Voltage Port 2/Current in Port 2
C Parameter (ABCD Parameter)
C Parameter = Current in Port 1/Voltage Port 2
H12 Parameter (H-Parameter)
H12 Parameter = Voltage Port 1/Voltage Port 2
G21 Parameter (G-Parameter)
G21 Parameter = Voltage Port 2/Voltage Port 1
A-Parameter (ABCD Parameter)
A Parameter = Voltage Port 1/Voltage Port 2

## G22 Parameter (G-Parameter) Formula

G22 Parameter = Voltage Port 2/Current in Port 2
g22 = V2/I2

## What is another name of G-Parameter in two port network?

Here, g12 and g21 do not have any units. At the same time, the units of g11 and g22 are mho (℧) and ohm (Ω), respectively. The g parameters are also called Inverse Hybrid parameters.

## How to Calculate G22 Parameter (G-Parameter)?

G22 Parameter (G-Parameter) calculator uses G22 Parameter = Voltage Port 2/Current in Port 2 to calculate the G22 Parameter, G22 Parameter (G-Parameter) are called as inverse hybrid parameters. The parameters, g12 and g21 do not have any units, since those are dimension less. The units of parameters, g11 and g22 are mho and ohm respectively. G22 Parameter is denoted by g22 symbol.

How to calculate G22 Parameter (G-Parameter) using this online calculator? To use this online calculator for G22 Parameter (G-Parameter), enter Voltage Port 2 (V2) & Current in Port 2 (I2) and hit the calculate button. Here is how the G22 Parameter (G-Parameter) calculation can be explained with given input values -> 215.6863 = 220/1.02.

### FAQ

What is G22 Parameter (G-Parameter)?
G22 Parameter (G-Parameter) are called as inverse hybrid parameters. The parameters, g12 and g21 do not have any units, since those are dimension less. The units of parameters, g11 and g22 are mho and ohm respectively and is represented as g22 = V2/I2 or G22 Parameter = Voltage Port 2/Current in Port 2. Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light & Current in port 2 is the magnitude of current flowing through port 2.
How to calculate G22 Parameter (G-Parameter)?
G22 Parameter (G-Parameter) are called as inverse hybrid parameters. The parameters, g12 and g21 do not have any units, since those are dimension less. The units of parameters, g11 and g22 are mho and ohm respectively is calculated using G22 Parameter = Voltage Port 2/Current in Port 2. To calculate G22 Parameter (G-Parameter), you need Voltage Port 2 (V2) & Current in Port 2 (I2). With our tool, you need to enter the respective value for Voltage Port 2 & Current in Port 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well. Let Others Know