Gel-Space Ratio for Complete Hydration Solution

STEP 0: Pre-Calculation Summary
Formula Used
Gel space Ratio = (0.657*Mass Of Cement)/((0.319*Mass Of Cement)+Volume Of Mixing Water)
G/S = (0.657*C)/((0.319*C)+Wo)
This formula uses 3 Variables
Variables Used
Gel space Ratio - Gel Space ratio is the ratio of the volume of cement gel to sum of the volume of cement gel and that of the capillary pores.
Mass Of Cement - (Measured in Gram) - Mass Of Cement is defined as the total weight of cement taken.
Volume Of Mixing Water - (Measured in Gram) - Volume Of Mixing Water is the amount of water added to the cementitous material.
STEP 1: Convert Input(s) to Base Unit
Mass Of Cement: 10 Kilogram --> 10000 Gram (Check conversion here)
Volume Of Mixing Water: 1000 Milliliter --> 0 Gram (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
G/S = (0.657*C)/((0.319*C)+Wo) --> (0.657*10000)/((0.319*10000)+1000)
Evaluating ... ...
G/S = 1.56801909307876
STEP 3: Convert Result to Output's Unit
1.56801909307876 --> No Conversion Required
FINAL ANSWER
1.56801909307876 <-- Gel space Ratio
(Calculation completed in 00.031 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2200+ more calculators!
Verified by Swarnima Singh
NIT Jaipur (mnitj), jaipur
Swarnima Singh has verified this Calculator and 6 more calculators!

7 Concrete Calculators

Modulus of Rupture of rectangular sample in three-point bending
Modulus of rupture of the concrete = (3*Load at fracture point*Length of section)/(2*Width of Section*(Average Section Thickness^2)) Go
Modulus of Rupture of rectangular sample in four-point bending
Modulus of rupture of the concrete = (Load at fracture point*Length of section)/(Width of Section*(Average Section Thickness^2)) Go
Gel-Space Ratio for Complete Hydration
Gel space Ratio = (0.657*Mass Of Cement)/((0.319*Mass Of Cement)+Volume Of Mixing Water) Go
Volume of products of hydration per unit of dry cement
Volume of Solid Products of Hydration = (Volume of Hydrated Cement/Absolute Volume of Dry Cement actually Hydrated) Go
Target Mean Strength for Mix Design
Target average compressive strength = Characteristic compressive strength+(1.65*Standard Deviation of distribution) Go
Volume of Empty Capillary Pores
Volume Of Empty Capillary Pores = (Volume of Capillary Pores-Volume of Water Filled Capillary Pores) Go
Modulus of Elasticity of Concrete
Modulus of Elasticity of Concrete = 5000*(Characteristics compressive strength of concrete)^0.5 Go

Gel-Space Ratio for Complete Hydration Formula

Gel space Ratio = (0.657*Mass Of Cement)/((0.319*Mass Of Cement)+Volume Of Mixing Water)
G/S = (0.657*C)/((0.319*C)+Wo)

What is Gel-space ratio?

Gel-space ratio in concrete is a measure of voids in concrete. It can be taken as an alternative parameter to the porosity of concrete.

Importance of Gel-Space Ratio:

Strength calculated with g/s ratio considers the compaction. Besides this, strength can be calculated even for a fraction of hydrated cement and at any age. It can also be used to measure porosity.

How to Calculate Gel-Space Ratio for Complete Hydration?

Gel-Space Ratio for Complete Hydration calculator uses Gel space Ratio = (0.657*Mass Of Cement)/((0.319*Mass Of Cement)+Volume Of Mixing Water) to calculate the Gel space Ratio, The Gel-Space Ratio for Complete Hydration is defined as the ratio of the volume of cement gel to sum of the volume of cement gel and that of the capillary pores when subjected to complete hydration. Gel space Ratio is denoted by G/S symbol.

How to calculate Gel-Space Ratio for Complete Hydration using this online calculator? To use this online calculator for Gel-Space Ratio for Complete Hydration, enter Mass Of Cement (C) & Volume Of Mixing Water (Wo) and hit the calculate button. Here is how the Gel-Space Ratio for Complete Hydration calculation can be explained with given input values -> 2.058916 = (0.657*10)/((0.319*10)+0.001).

FAQ

What is Gel-Space Ratio for Complete Hydration?
The Gel-Space Ratio for Complete Hydration is defined as the ratio of the volume of cement gel to sum of the volume of cement gel and that of the capillary pores when subjected to complete hydration and is represented as G/S = (0.657*C)/((0.319*C)+Wo) or Gel space Ratio = (0.657*Mass Of Cement)/((0.319*Mass Of Cement)+Volume Of Mixing Water). Mass Of Cement is defined as the total weight of cement taken & Volume Of Mixing Water is the amount of water added to the cementitous material.
How to calculate Gel-Space Ratio for Complete Hydration?
The Gel-Space Ratio for Complete Hydration is defined as the ratio of the volume of cement gel to sum of the volume of cement gel and that of the capillary pores when subjected to complete hydration is calculated using Gel space Ratio = (0.657*Mass Of Cement)/((0.319*Mass Of Cement)+Volume Of Mixing Water). To calculate Gel-Space Ratio for Complete Hydration, you need Mass Of Cement (C) & Volume Of Mixing Water (Wo). With our tool, you need to enter the respective value for Mass Of Cement & Volume Of Mixing Water and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!