General Sewing Data Calculator

✖Man Power expresses the number of people working or available for work or service.ⓘ Man Power [M]			+10% -10%
✖Work Hours are the period of hours that a person spends at paid labor.ⓘ Work Hours [W_T]			+10% -10%
✖Target calculation is a part of an operation bulletin preparation and daily production report, which improves the workers work efficiency.ⓘ Target [T]			+10% -10%

✖GSD (General Sewing Data) is an engineering technology of method analysis and time study designed specially for clothing industry.ⓘ General Sewing Data

⎘ Copy

👎

Formula

✖

General Sewing Data

Formula

`"GSD" = ("M"*"W"_{"T"})/"T"`

Example

`"2.666667"=("50"*"28800s")/"150"`

Calculator

LaTeX

Reset

👍

Download Industrial Engineering Formula PDF

General Sewing Data Solution

STEP 0: Pre-Calculation Summary

Formula Used

GSD = (Man Power*Work Hours)/Target
GSD = (M*W_T)/T
This formula uses 4 Variables

Variables Used

GSD - GSD (General Sewing Data) is an engineering technology of method analysis and time study designed specially for clothing industry.
Man Power - Man Power expresses the number of people working or available for work or service.
Work Hours - (Measured in Hour) - Work Hours are the period of hours that a person spends at paid labor.
Target - Target calculation is a part of an operation bulletin preparation and daily production report, which improves the workers work efficiency.

STEP 1: Convert Input(s) to Base Unit

Man Power: 50 --> No Conversion Required
Work Hours: 28800 Second --> 8 Hour (Check conversion here)
Target: 150 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

GSD = (M*W_T)/T --> (50*8)/150

Evaluating ... ...

GSD = 2.66666666666667

STEP 3: Convert Result to Output's Unit

2.66666666666667 --> No Conversion Required

FINAL ANSWER

2.66666666666667 ≈ 2.666667 <-- GSD

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Industrial Engineering » Industrial Parameters » General Sewing Data

Credits

Created by Kaki Varun Krishna

Mahatma Gandhi Institute of Technology (MGIT), Hyderabad

Kaki Varun Krishna has created this Calculator and 25+ more calculators!

Verified by Abhishek Dharmendra Bansile

Vishwakarma Institute of Information Technology, Pune (VIIT Pune), Pune

Abhishek Dharmendra Bansile has verified this Calculator and 10+ more calculators!

< 12 Industrial Parameters Calculators

Binomial Distribution

Go Binomial Distribution = Number of Trials!*(Probability of Success of Single Trial^Specific Outcomes within Trials)*(Probability of Failure of Single Trial^(Number of Trials-Specific Outcomes within Trials))/(Specific Outcomes within Trials!*(Number of Trials-Specific Outcomes within Trials)!)

Normal Distribution

Go Normal Distribution = e^(-(Specific Outcomes within Trials-Mean of Distribution)^2/(2*Standard Deviation of distribution^2))/(Standard Deviation of distribution*sqrt(2*pi))

Learning Factor

Go Learning Factor = (log10(Time for Task 1)-log10(Time for n Tasks))/log10(Number of Tasks)

Poisson Distribution

Go Poisson Distribution = Mean of Distribution^(Specific Outcomes within Trials)*e^(-Mean of Distribution)/(Specific Outcomes within Trials!)

Annual Devaluation Rate

Go Annual Devaluation Rate = (Rate of Return Foreign Currency-Rate of Return USD)/(1+Rate of Return USD)

Crashing

Go Cost Slope = (Crash Cost-Normal Cost)/(Normal Time-Crash Time)

Forecasting Error

Go Forecasting Error = Observed Value at Time t-Smooth Averaged Forecast for Period t

Macroscopic Traffic Density

Go Traffic Density in vpm = Hourly Flow Rate in vph/(Avg. Travel Speed/0.277778)

General Sewing Data

Go GSD = (Man Power*Work Hours)/Target

Traffic Intensity

Go Traffic Intensity = Mean Arrival Rate/Mean Service Rate

Variance

Go Variance = ((Pessimistic Time-Optimistic Time)/6)^2

Reorder Point

Go Reorder Point = Lead Time Demand+Safety Stock

General Sewing Data Formula

GSD = (Man Power*Work Hours)/Target
GSD = (M*W_T)/T

How does the general sewing data work?

GSD recognizes commonly occurring motion sequences within the sewing industry and describes the motion utilizing unique codes that has a definite time value attached. There are 25 general codes, with additional Get and Put and selected MTM codes to give complete coverage.

How to Calculate General Sewing Data?

General Sewing Data calculator uses GSD = (Man Power*Work Hours)/Target to calculate the GSD, General Sewing Data is a technique for methods analysis and the setting of time standards for the sewing industries. It can be used to evaluate operations within the textile industry in such environments as Cutting, Sewing, Examination, and Packing. GSD is denoted by GSD symbol.

How to calculate General Sewing Data using this online calculator? To use this online calculator for General Sewing Data, enter Man Power (M), Work Hours (W_T) & Target (T) and hit the calculate button. Here is how the General Sewing Data calculation can be explained with given input values -> 2.666667 = (50*28800)/150.

FAQ

What is General Sewing Data?

General Sewing Data is a technique for methods analysis and the setting of time standards for the sewing industries. It can be used to evaluate operations within the textile industry in such environments as Cutting, Sewing, Examination, and Packing and is represented as GSD = (M*W_T)/T or GSD = (Man Power*Work Hours)/Target. Man Power expresses the number of people working or available for work or service, Work Hours are the period of hours that a person spends at paid labor & Target calculation is a part of an operation bulletin preparation and daily production report, which improves the workers work efficiency.

How to calculate General Sewing Data?

General Sewing Data is a technique for methods analysis and the setting of time standards for the sewing industries. It can be used to evaluate operations within the textile industry in such environments as Cutting, Sewing, Examination, and Packing is calculated using GSD = (Man Power*Work Hours)/Target. To calculate General Sewing Data, you need Man Power (M), Work Hours (W_T) & Target (T). With our tool, you need to enter the respective value for Man Power, Work Hours & Target and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search