Grade Resistance Factor given Grade Resistance for Motion on Slope Calculator

✖Grade Resistance is the force, due to gravity, that resists the movement of a vehicle up a slope.ⓘ Grade Resistance [G]			+10% -10%
✖Percent Grade refers to the tangent of the angle of that surface to the horizontal.ⓘ Percent Grade [PG]			+10% -10%
✖Weight on Wheels is the weight of an equipment is resting on its wheels.ⓘ Weight on Wheels [W]			+10% -10%

✖Grade Resistance Factor is considered to have a grade resistance equal to 1% of the vehicle's weight.ⓘ Grade Resistance Factor given Grade Resistance for Motion on Slope [R_g]

⎘ Copy

👎

Formula

✖

Grade Resistance Factor given Grade Resistance for Motion on Slope

Formula

`"R"_{"g"} = ("G"/("PG"*"W"))`

Example

`"0.124875N/Kg"=("9.99N"/("4"*"20.0kg"))`

Calculator

LaTeX

Reset

👍

Download Geotechnical Engineering Formula PDF

Grade Resistance Factor given Grade Resistance for Motion on Slope Solution

STEP 0: Pre-Calculation Summary

Formula Used

Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels))
R_g = (G/(PG*W))
This formula uses 4 Variables

Variables Used

Grade Resistance Factor - (Measured in Newton per Kilogram) - Grade Resistance Factor is considered to have a grade resistance equal to 1% of the vehicle's weight.
Grade Resistance - (Measured in Newton) - Grade Resistance is the force, due to gravity, that resists the movement of a vehicle up a slope.
Percent Grade - Percent Grade refers to the tangent of the angle of that surface to the horizontal.
Weight on Wheels - (Measured in Kilogram) - Weight on Wheels is the weight of an equipment is resting on its wheels.

STEP 1: Convert Input(s) to Base Unit

Grade Resistance: 9.99 Newton --> 9.99 Newton No Conversion Required
Percent Grade: 4 --> No Conversion Required
Weight on Wheels: 20 Kilogram --> 20 Kilogram No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_g = (G/(PG*W)) --> (9.99/(4*20))

Evaluating ... ...

R_g = 0.124875

STEP 3: Convert Result to Output's Unit

0.124875 Newton per Kilogram --> No Conversion Required

FINAL ANSWER

0.124875 Newton per Kilogram <-- Grade Resistance Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Earth Moving » Grade Resistance Factor given Grade Resistance for Motion on Slope

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 12 Earth Moving Calculators

Rolling Resistance to Motion of Wheeled Vehicles

Go Rolling Resistance = (Rolling Resistance Factor*Weight on Wheels)+(Tire Penetration Factor*Tire Penetration*Weight on Wheels)

Weight on Wheels given Rolling Resistance

Go Weight on Wheels = (Rolling Resistance/(Rolling Resistance Factor+Tire Penetration Factor*Tire Penetration))

Total Road Resistance given Rolling Resistance and Grade Resistance

Go Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels)

Weight on Wheels given Total Road Resistance

Go Weight on Wheels = (Total Road Resistance/(0.02+0.015*Tire Penetration+0.01*Percent Grade))

Grade Resistance Factor given Grade Resistance for Motion on Slope

Go Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels))

Weight on Wheels using Grade Resistance for Motion on Slope

Go Weight on Wheels = (Grade Resistance/(Grade Resistance Factor*Percent Grade))

Percent Grade given Grade Resistance for Motion on Slope

Go Percent Grade = (Grade Resistance/(Grade Resistance Factor*Weight on Wheels))

Grade Resistance for Motion on Slope

Go Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels

Rolling Resistance when Rolling Resistance Factor is Two Percent

Go Rolling Resistance = (0.02+0.015*Tire Penetration)*Weight on Wheels

Usable Pull to Overcome Loss of Power with Altitude

Go Usable Pull = (Coefficient of Traction*Weight on Wheels)

Coefficient of Traction given Usable Pull

Go Coefficient of Traction = (Usable Pull/Weight on Wheels)

Weight on Drivers given Usable Pull

Go Weight on Wheels = (Usable Pull/Coefficient of Traction)

Grade Resistance Factor given Grade Resistance for Motion on Slope Formula

Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels))
R_g = (G/(PG*W))

What is Grade of Road?

The Grade of a road is defined as a measure of the road's steepness as it rises and falls along its route. In other words, it is the magnitude of its incline or slope. The grade of a highway is a measure of its incline or slope.

How to Calculate Grade Resistance Factor given Grade Resistance for Motion on Slope?

Grade Resistance Factor given Grade Resistance for Motion on Slope calculator uses Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels)) to calculate the Grade Resistance Factor, The Grade Resistance Factor given Grade Resistance for Motion on Slope is defined as the factor of the force, due to gravity, that resists the movement of a vehicle up a slope. Grade Resistance Factor is denoted by R_g symbol.

How to calculate Grade Resistance Factor given Grade Resistance for Motion on Slope using this online calculator? To use this online calculator for Grade Resistance Factor given Grade Resistance for Motion on Slope, enter Grade Resistance (G), Percent Grade (PG) & Weight on Wheels (W) and hit the calculate button. Here is how the Grade Resistance Factor given Grade Resistance for Motion on Slope calculation can be explained with given input values -> 0.124875 = (9.99/(4*20)).

FAQ

What is Grade Resistance Factor given Grade Resistance for Motion on Slope?

The Grade Resistance Factor given Grade Resistance for Motion on Slope is defined as the factor of the force, due to gravity, that resists the movement of a vehicle up a slope and is represented as R_g = (G/(PG*W)) or Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels)). Grade Resistance is the force, due to gravity, that resists the movement of a vehicle up a slope, Percent Grade refers to the tangent of the angle of that surface to the horizontal & Weight on Wheels is the weight of an equipment is resting on its wheels.

How to calculate Grade Resistance Factor given Grade Resistance for Motion on Slope?

The Grade Resistance Factor given Grade Resistance for Motion on Slope is defined as the factor of the force, due to gravity, that resists the movement of a vehicle up a slope is calculated using Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels)). To calculate Grade Resistance Factor given Grade Resistance for Motion on Slope, you need Grade Resistance (G), Percent Grade (PG) & Weight on Wheels (W). With our tool, you need to enter the respective value for Grade Resistance, Percent Grade & Weight on Wheels and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search