Grade Resistance for Motion on Slope Solution

STEP 0: Pre-Calculation Summary
Formula Used
Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels
G = Rg*PG*W
This formula uses 4 Variables
Variables Used
Grade Resistance - (Measured in Newton) - Grade Resistance is the force, due to gravity, that resists the movement of a vehicle up a slope.
Grade Resistance Factor - (Measured in Newton per Kilogram) - Grade Resistance Factor is considered to have a grade resistance equal to 1% of the vehicle's weight.
Percent Grade - Percent Grade refers to the tangent of the angle of that surface to the horizontal.
Weight on Wheels - (Measured in Kilogram) - Weight on Wheels is the weight of an equipment is resting on its wheels.
STEP 1: Convert Input(s) to Base Unit
Grade Resistance Factor: 4.97 Newton per Kilogram --> 4.97 Newton per Kilogram No Conversion Required
Percent Grade: 4 --> No Conversion Required
Weight on Wheels: 20 Kilogram --> 20 Kilogram No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
G = Rg*PG*W --> 4.97*4*20
Evaluating ... ...
G = 397.6
STEP 3: Convert Result to Output's Unit
397.6 Newton --> No Conversion Required
FINAL ANSWER
397.6 Newton <-- Grade Resistance
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Mridul Sharma
Indian Institute of Information Technology (IIIT), Bhopal
Mridul Sharma has verified this Calculator and 1700+ more calculators!

12 Earth Moving Calculators

Rolling Resistance to Motion of Wheeled Vehicles
Go Rolling Resistance = (Rolling Resistance Factor*Weight on Wheels)+(Tire Penetration Factor*Tire Penetration*Weight on Wheels)
Weight on Wheels given Rolling Resistance
Go Weight on Wheels = (Rolling Resistance/(Rolling Resistance Factor+Tire Penetration Factor*Tire Penetration))
Total Road Resistance given Rolling Resistance and Grade Resistance
Go Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels)
Weight on Wheels given Total Road Resistance
Go Weight on Wheels = (Total Road Resistance/(0.02+0.015*Tire Penetration+0.01*Percent Grade))
Grade Resistance Factor given Grade Resistance for Motion on Slope
Go Grade Resistance Factor = (Grade Resistance/(Percent Grade*Weight on Wheels))
Weight on Wheels using Grade Resistance for Motion on Slope
Go Weight on Wheels = (Grade Resistance/(Grade Resistance Factor*Percent Grade))
Percent Grade given Grade Resistance for Motion on Slope
Go Percent Grade = (Grade Resistance/(Grade Resistance Factor*Weight on Wheels))
Grade Resistance for Motion on Slope
Go Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels
Rolling Resistance when Rolling Resistance Factor is Two Percent
Go Rolling Resistance = (0.02+0.015*Tire Penetration)*Weight on Wheels
Usable Pull to Overcome Loss of Power with Altitude
Go Usable Pull = (Coefficient of Traction*Weight on Wheels)
Coefficient of Traction given Usable Pull
Go Coefficient of Traction = (Usable Pull/Weight on Wheels)
Weight on Drivers given Usable Pull
Go Weight on Wheels = (Usable Pull/Coefficient of Traction)

Grade Resistance for Motion on Slope Formula

Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels
G = Rg*PG*W

What is Grade of a Road?

The grade of a road is defined as a measure of the road's steepness as it rises and falls along its route. In other words, it is the magnitude of its incline or slope. The grade of a highway is a measure of its incline or slope.

How to Calculate Grade Resistance for Motion on Slope?

Grade Resistance for Motion on Slope calculator uses Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels to calculate the Grade Resistance, The Grade Resistance for Motion on Slope is defines as the force, due to gravity, that resists the movement of a vehicle up a slope. Grade Resistance is denoted by G symbol.

How to calculate Grade Resistance for Motion on Slope using this online calculator? To use this online calculator for Grade Resistance for Motion on Slope, enter Grade Resistance Factor (Rg), Percent Grade (PG) & Weight on Wheels (W) and hit the calculate button. Here is how the Grade Resistance for Motion on Slope calculation can be explained with given input values -> 397.6 = 4.97*4*20.

FAQ

What is Grade Resistance for Motion on Slope?
The Grade Resistance for Motion on Slope is defines as the force, due to gravity, that resists the movement of a vehicle up a slope and is represented as G = Rg*PG*W or Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels. Grade Resistance Factor is considered to have a grade resistance equal to 1% of the vehicle's weight, Percent Grade refers to the tangent of the angle of that surface to the horizontal & Weight on Wheels is the weight of an equipment is resting on its wheels.
How to calculate Grade Resistance for Motion on Slope?
The Grade Resistance for Motion on Slope is defines as the force, due to gravity, that resists the movement of a vehicle up a slope is calculated using Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels. To calculate Grade Resistance for Motion on Slope, you need Grade Resistance Factor (Rg), Percent Grade (PG) & Weight on Wheels (W). With our tool, you need to enter the respective value for Grade Resistance Factor, Percent Grade & Weight on Wheels and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!