H12 Parameter given Voltage-1 (H-Parameter) Calculator

✖Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.ⓘ Voltage Port 1 [V₁]			+10% -10%
✖H11 Parameter is short circuit input impedance.ⓘ H11 Parameter [h₁₁]			+10% -10%
✖Current in port 1 is the magnitude of current flowing through port 1.ⓘ Current in Port 1 [I₁]			+10% -10%
✖Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.ⓘ Voltage Port 2 [V₂]			+10% -10%

✖H12 Parameter is open circuit reverse voltage gain.ⓘ H12 Parameter given Voltage-1 (H-Parameter) [h₁₂]

⎘ Copy

👎

Formula

✖

H12 Parameter given Voltage-1 (H-Parameter)

Formula

`"h"_{"12"} = ("V"_{"1"}-("h"_{"11"}*"I"_{"1"}))/"V"_{"2"}`

Example

`"1.992327"=("440V"-("2.11Ω"*"0.8A"))/"220V"`

Calculator

LaTeX

Reset

👍

Download Two-Port Network Formula PDF

H12 Parameter given Voltage-1 (H-Parameter) Solution

STEP 0: Pre-Calculation Summary

Formula Used

H12 Parameter = (Voltage Port 1-(H11 Parameter*Current in Port 1))/Voltage Port 2
h₁₂ = (V₁-(h₁₁*I₁))/V₂
This formula uses 5 Variables

Variables Used

H12 Parameter - H12 Parameter is open circuit reverse voltage gain.
Voltage Port 1 - (Measured in Volt) - Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
H11 Parameter - (Measured in Ohm) - H11 Parameter is short circuit input impedance.
Current in Port 1 - (Measured in Ampere) - Current in port 1 is the magnitude of current flowing through port 1.
Voltage Port 2 - (Measured in Volt) - Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.

STEP 1: Convert Input(s) to Base Unit

Voltage Port 1: 440 Volt --> 440 Volt No Conversion Required
H11 Parameter: 2.11 Ohm --> 2.11 Ohm No Conversion Required
Current in Port 1: 0.8 Ampere --> 0.8 Ampere No Conversion Required
Voltage Port 2: 220 Volt --> 220 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h₁₂ = (V₁-(h₁₁*I₁))/V₂ --> (440-(2.11*0.8))/220

Evaluating ... ...

h₁₂ = 1.99232727272727

STEP 3: Convert Result to Output's Unit

1.99232727272727 --> No Conversion Required

FINAL ANSWER

1.99232727272727 ≈ 1.992327 <-- H12 Parameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Two-Port Network » H-parameter » H12 Parameter given Voltage-1 (H-Parameter)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 25 H-parameter Calculators

H22 Parameter given Current-2 (H-Parameter)

Go H22 Parameter = (Current in Port 2-(H21 Parameter*Current in Port 1))/Voltage Port 2

Current-1 given Current-2 (H-Parameter)

Go Current in Port 1 = (Current in Port 2-(H22 Parameter*Voltage Port 2))/H21 Parameter

Current-2 (H-Parameter)

Go Current in Port 2 = (H22 Parameter*Voltage Port 2)+(H21 Parameter*Current in Port 1)

H12 Parameter given Voltage-1 (H-Parameter)

Go H12 Parameter = (Voltage Port 1-(H11 Parameter*Current in Port 1))/Voltage Port 2

Current-1 given Voltage-1 (H-Parameter)

Go Current in Port 1 = (Voltage Port 1-(H12 Parameter*Voltage Port 2))/H11 Parameter

Current-2 given H21 Parameter (H-Parameter)

Go Current in Port 2 = H21 Parameter*Current in Port 1

Current-1 given H21 Parameter (H-Parameter)

Go Current in Port 1 = Current in Port 2/H21 Parameter

H21 Parameter (H-Parameter)

Go H21 Parameter = Current in Port 2/Current in Port 1

Voltage-2 given H22 Parameter (H-Parameter)

Go Voltage Port 2 = Current in Port 2/H22 Parameter

Voltage-1 given H11 Parameter (H-Parameter)

Go Voltage Port 1 = Current in Port 1*H11 Parameter

Current-1 given H11 Parameter (H-Parameter)

Go Current in Port 1 = Voltage Port 1/H11 Parameter

Current-2 given H22 Parameter (H-Parameter)

Go Current in Port 2 = Voltage Port 2*H22 Parameter

H11 Parameter (H-Parameter)

Go H11 Parameter = Voltage Port 1/Current in Port 1

H22 Parameter (H-Parameter)

Go H22 Parameter = Current in Port 2/Voltage Port 2

Voltage-1 given H12 Parameter (H-Parameter)

Go Voltage Port 1 = H12 Parameter*Voltage Port 2

H12 Parameter (H-Parameter)

Go H12 Parameter = Voltage Port 1/Voltage Port 2

H21 Parameter in Terms of Z Parameters

Go H21 Parameter = -Z21 Parameter/Z22 Parameter

H12 Parameter in Terms of Z Parameters

Go H12 Parameter = Z12 Parameter/Z22 Parameter

H21 Parameter in Terms of Y Parameters

Go H21 Parameter = Y21 Parameter/Y11 Parameter

H21 Parameter in Terms of G Parameters

Go H21 Parameter = (-1)*G21 Parameter/Delta-G

H12 Parameter in Terms of G Parameters

Go H12 Parameter = (-1)*G12 Parameter/Delta-G

H11 Parameter in Terms of Z Parameters

Go H11 Parameter = Delta-Z/Z22 Parameter

H22 Parameter in Terms of Y Parameters

Go H22 Parameter = Delta-Y/Y11 Parameter

H22 Parameter in Terms of Z Parameters

Go H22 Parameter = 1/Z22 Parameter

H11 Parameter in Terms of Y Parameters

Go H11 Parameter = 1/Y11 Parameter

H12 Parameter given Voltage-1 (H-Parameter) Formula

H12 Parameter = (Voltage Port 1-(H11 Parameter*Current in Port 1))/Voltage Port 2
h₁₂ = (V₁-(h₁₁*I₁))/V₂

What are hybrid parameters?

Hybrid parameters (also known as h parameters) are known as 'hybrid' parameters as they use Z parameters, Y parameters, voltage ratio, and current ratios to represent the relationship between voltage and current in a two-port network.

How to Calculate H12 Parameter given Voltage-1 (H-Parameter)?

H12 Parameter given Voltage-1 (H-Parameter) calculator uses H12 Parameter = (Voltage Port 1-(H11 Parameter*Current in Port 1))/Voltage Port 2 to calculate the H12 Parameter, The H12 Parameter given Voltage-1 (H-parameter) formula is defined as open circuit reverse voltage gain of a two-port network of the hybrid parameters. H12 Parameter is denoted by h₁₂ symbol.

How to calculate H12 Parameter given Voltage-1 (H-Parameter) using this online calculator? To use this online calculator for H12 Parameter given Voltage-1 (H-Parameter), enter Voltage Port 1 (V₁), H11 Parameter (h₁₁), Current in Port 1 (I₁) & Voltage Port 2 (V₂) and hit the calculate button. Here is how the H12 Parameter given Voltage-1 (H-Parameter) calculation can be explained with given input values -> 1.992327 = (440-(2.11*0.8))/220.

FAQ

What is H12 Parameter given Voltage-1 (H-Parameter)?

The H12 Parameter given Voltage-1 (H-parameter) formula is defined as open circuit reverse voltage gain of a two-port network of the hybrid parameters and is represented as h₁₂ = (V₁-(h₁₁*I₁))/V₂ or H12 Parameter = (Voltage Port 1-(H11 Parameter*Current in Port 1))/Voltage Port 2. Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light, H11 Parameter is short circuit input impedance, Current in port 1 is the magnitude of current flowing through port 1 & Voltage port 2 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.

How to calculate H12 Parameter given Voltage-1 (H-Parameter)?

The H12 Parameter given Voltage-1 (H-parameter) formula is defined as open circuit reverse voltage gain of a two-port network of the hybrid parameters is calculated using H12 Parameter = (Voltage Port 1-(H11 Parameter*Current in Port 1))/Voltage Port 2. To calculate H12 Parameter given Voltage-1 (H-Parameter), you need Voltage Port 1 (V₁), H11 Parameter (h₁₁), Current in Port 1 (I₁) & Voltage Port 2 (V₂). With our tool, you need to enter the respective value for Voltage Port 1, H11 Parameter, Current in Port 1 & Voltage Port 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate H12 Parameter?

In this formula, H12 Parameter uses Voltage Port 1, H11 Parameter, Current in Port 1 & Voltage Port 2. We can use 3 other way(s) to calculate the same, which is/are as follows -

H12 Parameter = Voltage Port 1/Voltage Port 2
H12 Parameter = Z12 Parameter/Z22 Parameter
H12 Parameter = (-1)*G12 Parameter/Delta-G

Home

FREE PDFs

🔍 Search