Heat Generated during Microbial Growth Calculator

⤿

✖Substrate yield coefficient is the amount of microbial biomass usually expressed as cell mass produced and the amount of substrate consumed during a specific microbial growth or fermentation process.ⓘ Substrate yield coefficient [Y_X/S]			+10% -10%
✖Heat of combustion of the substrate refers to the amount of heat energy released when a specific quantity of that substrate undergoes complete combustion in the presence of oxygen.ⓘ Heat of combustion [ΔH_sustrate]			+10% -10%
✖Heat of combustion of cell measurement is used to determine the energy content of biological cells or their components.ⓘ Heat of combustion of cell [ΔH_combustion]			+10% -10%

✖Metabolic heat evolved refers to the heat energy that is produced as a result of metabolic processes within living organisms, primarily during cellular respiration.ⓘ Heat Generated during Microbial Growth [Y_{heat evolved}]

⎘ Copy

👎

Formula

✖

Heat Generated during Microbial Growth

Formula

`"Y"_{"heat evolved"} = ("Y"_{"X/S"})/("ΔH"_{"sustrate"}-"Y"_{"X/S"}*"ΔH"_{"combustion"})`

Example

`"2J"=("100")/("100J"-"100"*"0.5J")`

Calculator

LaTeX

Reset

👍

Download Chemistry Formula PDF PDF Image

Heat Generated during Microbial Growth Solution

STEP 0: Pre-Calculation Summary

Formula Used

Metabolic heat evolved = (Substrate yield coefficient)/(Heat of combustion-Substrate yield coefficient*Heat of combustion of cell)
Y_{heat evolved} = (Y_X/S)/(ΔH_sustrate-Y_X/S*ΔH_combustion)
This formula uses 4 Variables

Variables Used

Metabolic heat evolved - (Measured in Joule) - Metabolic heat evolved refers to the heat energy that is produced as a result of metabolic processes within living organisms, primarily during cellular respiration.
Substrate yield coefficient - Substrate yield coefficient is the amount of microbial biomass usually expressed as cell mass produced and the amount of substrate consumed during a specific microbial growth or fermentation process.
Heat of combustion - (Measured in Joule) - Heat of combustion of the substrate refers to the amount of heat energy released when a specific quantity of that substrate undergoes complete combustion in the presence of oxygen.
Heat of combustion of cell - (Measured in Joule) - Heat of combustion of cell measurement is used to determine the energy content of biological cells or their components.

STEP 1: Convert Input(s) to Base Unit

Substrate yield coefficient: 100 --> No Conversion Required
Heat of combustion: 100 Joule --> 100 Joule No Conversion Required
Heat of combustion of cell: 0.5 Joule --> 0.5 Joule No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y_{heat evolved} = (Y_X/S)/(ΔH_sustrate-Y_X/S*ΔH_combustion) --> (100)/(100-100*0.5)

Evaluating ... ...

Y_{heat evolved} = 2

STEP 3: Convert Result to Output's Unit

2 Joule --> No Conversion Required

FINAL ANSWER

2 Joule <-- Metabolic heat evolved

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Biochemistry » Microbiology » Heat Generated during Microbial Growth

Credits

Created by harykrishnan

SRM Institute of Science and Technology (SRMIST), Chennai

harykrishnan has created this Calculator and 10+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 800+ more calculators!

< 24 Microbiology Calculators

Narrow Heritability using Breeder's equation

Go Narrow Sense Heritability = var(Additive Genetic of (Aa) Allele,Additive Genetic of Allele (AA),Additive Genetic of (aa) Allele)/var(Phenotype of (aa) Allele,Phenotype of (AA) Allele,Phenotype of (Aa) Allele)

Broad Heritability using Breeder's Equation

Go Broad Sense Heritability = var(Genotype of (Aa) Allele,Genotype of (aa) Allele,Genotype of (AA) Allele)/var(Phenotype of (aa) Allele,Phenotype of (AA) Allele,Phenotype of (Aa) Allele)

Protein Release Constant

Go The release constant = ln(The protein content maximum)/(The protein content maximum-The protein release fractional)/The sonication time

Yield of Protein

Go The yield of protein = (The Volume of top phase*The optical density of top phase)/(The Volume of bottom phase*The optical density of bottom phase)

Lineweaver Burk plot

Go The initial reaction rate = (The maximum reaction rate*The substrare concentration)/(Michaelis Constant+The substrare concentration)

Heat Generated during Microbial Growth

Go Metabolic heat evolved = (Substrate yield coefficient)/(Heat of combustion-Substrate yield coefficient*Heat of combustion of cell)

Rotational Angle of Alpha Helix

Go Rotation Angle per Residue = acos((1-(4*cos(((Dihedral angles around negative 65°+Dihedral Angles around negative 45°)/2)^2)))/3)

Temperature Coefficient of Resistance of RTD

Go Temperature Coefficient of Resistance = (Resistance of RTD at 100-Resistance of RTD at 0)/(Resistance of RTD at 0*100)

Hardy-Weinberg Equilibrium Equation for Predicted Frequency of Heterozygous (Aa) Type

Go Predicted Frequency of Heterozygous people = 1-(Predicted Frequency of Homozygous Dominant^2)-(Predicted Frequency of Homozygous Recessive^2)

Hardy Weinberg Equation for Predicted Frequency of Homozygous Dominant (AA) Type

Go Predicted Frequency of Homozygous Dominant = 1-(Predicted Frequency of Heterozygous people)-(Predicted Frequency of Homozygous Recessive)

Net Specific Replication Rate

Go Net specific replication rate = (1/Cell mass concentration)*(Change in mass concentration/Change in time)

Net Specific Growth Rate of Bacteria

Go Net specific growth rate = 1/Cell mass concentration*(Change in mass concentration/Change in time)

Fugacity Capacity of Chemical in Fish

Go Fugacity Capacity of Fish = (Density of Fish*Bioconcentration Factors)/Henry Law Constant

Fitness of Group i in Population

Go Fitness of Group i = Number of Group i Individuals in Next Generation/Number of Group i individuals Previous Generation

Protein release by cell disruption

Go The protein release fractional = The protein content maximum-The protein concentration at specific time

Wall tension of Vessel using Young-Laplace Equation

Go Hoop Stress = (Blood Pressure*Inner Radius of Cylinder)/Wall Thickness

Percentage Protein Recovery

Go The protein recovery = (The final concentration of protein/The intial concentration of protein)*100

Partition coefficeint of protein

Go The partition coefiicient = The optical density of top phase/The optical density of bottom phase

Bioconcentration Factor

Go Bioconcentration Factors = Concentration of Metal in Plant Tissue/Concentration of Metal in Soil

Octanol-Water Partition Coefficient

Go Octanol-Water Partition Coefficient = Concentration of Octanol/Concentration of Water

Net Specific Growth Rate Cell Death

Go Net specific growth rate = Gross specific growth rate-Rate of loss of cell mass

Solute Potential of Cell given Water and Pressure Potential

Go Solute Potential = Water Potential-Pressure Potential

Pressure Potential of Cell given Water and Solute Potential

Go Pressure Potential = Water Potential-Solute Potential

Approximate Water Potential of Cell

Go Water Potential = Solute Potential+Pressure Potential

Heat Generated during Microbial Growth Formula

Metabolic heat evolved = (Substrate yield coefficient)/(Heat of combustion-Substrate yield coefficient*Heat of combustion of cell)
Y_{heat evolved} = (Y_X/S)/(ΔH_sustrate-Y_X/S*ΔH_combustion)

What is Heat generated during Microbial Growth ?

Heat generated during microbial growth refers to the amount of heat energy released when a specific quantity of a cell or its components undergoes complete combustion in the presence of oxygen.

What is Metabolic Heat Evolved ?

Metabolic heat evolved, , also known as metabolic heat production or metabolic heat generation, refers to the heat energy that is produced as a result of metabolic processes within living organisms, primarily during cellular respiration.

How to Calculate Heat Generated during Microbial Growth?

Heat Generated during Microbial Growth calculator uses Metabolic heat evolved = (Substrate yield coefficient)/(Heat of combustion-Substrate yield coefficient*Heat of combustion of cell) to calculate the Metabolic heat evolved, The Heat Generated during Microbial Growth is metabolic heat evolved is the heat energy that is produced as a result of metabolic processes within living organisms, primarily during cellular respiration. Metabolic heat evolved is denoted by Y_{heat evolved} symbol.

How to calculate Heat Generated during Microbial Growth using this online calculator? To use this online calculator for Heat Generated during Microbial Growth, enter Substrate yield coefficient (Y_X/S), Heat of combustion (ΔH_sustrate) & Heat of combustion of cell (ΔH_combustion) and hit the calculate button. Here is how the Heat Generated during Microbial Growth calculation can be explained with given input values -> 2 = (100)/(100-100*0.5).

FAQ

What is Heat Generated during Microbial Growth?

The Heat Generated during Microbial Growth is metabolic heat evolved is the heat energy that is produced as a result of metabolic processes within living organisms, primarily during cellular respiration and is represented as Y_{heat evolved} = (Y_X/S)/(ΔH_sustrate-Y_X/S*ΔH_combustion) or Metabolic heat evolved = (Substrate yield coefficient)/(Heat of combustion-Substrate yield coefficient*Heat of combustion of cell). Substrate yield coefficient is the amount of microbial biomass usually expressed as cell mass produced and the amount of substrate consumed during a specific microbial growth or fermentation process, Heat of combustion of the substrate refers to the amount of heat energy released when a specific quantity of that substrate undergoes complete combustion in the presence of oxygen & Heat of combustion of cell measurement is used to determine the energy content of biological cells or their components.

How to calculate Heat Generated during Microbial Growth?

The Heat Generated during Microbial Growth is metabolic heat evolved is the heat energy that is produced as a result of metabolic processes within living organisms, primarily during cellular respiration is calculated using Metabolic heat evolved = (Substrate yield coefficient)/(Heat of combustion-Substrate yield coefficient*Heat of combustion of cell). To calculate Heat Generated during Microbial Growth, you need Substrate yield coefficient (Y_X/S), Heat of combustion (ΔH_sustrate) & Heat of combustion of cell (ΔH_combustion). With our tool, you need to enter the respective value for Substrate yield coefficient, Heat of combustion & Heat of combustion of cell and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search