Height of a hollow cylinder Calculator

Category	Math ↺
Math	Geometry ↺
Geometry	3D Geometry ↺
3D-Geometry	Hollow Cylinder ↺

✖Inner curved surface area is the area of the inner surface of the hollow cylinderⓘ Inner curved surface area [Ai]			+10% -10%
✖Radius 1 is a radial line from the focus to any point of a curve.ⓘ Radius 1 [r1]			+10% -10%

✖Height is the distance between the lowest and highest points of a person standing upright.ⓘ Height of a hollow cylinder [h]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 400+ more calculators!

Mona Gladys

St Joseph's College (St Joseph's College), Bengaluru

Mona Gladys has verified this Calculator and 400+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Lateral Surface Area of a Conical Frustum

Lateral Surface Area=pi*(Radius 1+Radius 2)*sqrt((Radius 1-Radius 2)^2+Height^2) GO

Volume of a Conical Frustum

Volume=(1/3)*pi*Height*(Radius 1^2+Radius 2^2+(Radius 1*Radius 2)) GO

Moment of Inertia of a solid sphere about its diameter

Moment of Inertia=2*(Mass*(Radius 1^2))/5 GO

Moment of inertia of a circular disc about an axis through its center and perpendicular to its plane

Moment of Inertia=(Mass*(Radius 1^2))/2 GO

Moment of Inertia of a right circular solid cylinder about its symmetry axis

Moment of Inertia=(Mass*(Radius 1^2))/2 GO

Moment of Inertia of a spherical shell about its diameter

Moment of Inertia=2*(Mass*(Radius 1))/3 GO

Moment of Inertia of a right circular hollow cylinder about its axis

Moment of Inertia=(Mass*(Radius 1)^2) GO

Moment of inertia of a circular ring about an axis through its center and perpendicular to its plane

Moment of Inertia=Mass*(Radius 1^2) GO

Area of a Torus

Area=pi^2*(Radius 2^2-Radius 1^2) GO

Top Surface Area of a Conical Frustum

Top Surface Area=pi*(Radius 1)^2 GO

Volume of cylinder circumscribing a sphere when radius of sphere is known

Volume=2*pi*(Radius 1^3) GO

< 11 Other formulas that calculate the same Output

Height of a trapezoid when area and sum of parallel sides are given

Height=(2*Area)/Sum of parallel sides of a trapezoid GO

Height of a triangular prism when lateral surface area is given

Height=Lateral Surface Area/(Side A+Side B+Side C) GO

Height of an isosceles trapezoid

Height=sqrt(Side C^2-0.25*(Side A-Side B)^2) GO

Altitude of an isosceles triangle

Height=sqrt((Side A)^2+((Side B)^2/4)) GO

Height of a triangular prism when base and volume are given

Height=(2*Volume)/(Base*Length) GO

Altitude of the largest right pyramid with a square base that can be inscribed in a sphere of radius a

Height=4*Radius of Sphere/3 GO

Height of Cone inscribed in a sphere for maximum volume of cone in terms of radius of sphere

Height=4*Radius of Sphere/3 GO

Height of Cone circumscribing a sphere such that volume of cone is minimum

Height=4*Radius of Sphere GO

Height of parabolic section that can be cut from a cone for maximum area of parabolic section

Height=0.75*Slant Height GO

Height of a circular cylinder of maximum convex surface area in a given circular cone

Height=Height of Cone/2 GO

Height of Largest right circular cylinder that can be inscribed within a cone

Height=Height of Cone/3 GO

Height of a hollow cylinder Formula

Height=(Inner curved surface area)/(2*pi*Radius 1)
h=(Ai)/(2*pi*r1)

More formulas

Volume of Hollow Cylinder GO

Inner surface area of the hollow cylinder GO

Outer surface of the hollows cylinder GO

Inner radius of a hallow cylinder GO

Outer radius of hollow cylinder GO

What is a Cylinder

A cylinder is a three-dimensional solid that holds two parallel bases joined by a curved surface, at a fixed distance. A cylinder is a three-dimensional shape consisting of two parallel circular bases, joined by a curved surface. The bases are always congruent and parallel. f the bases are circular in shape, then it is called a right circular cylinder. If the bases are in an elliptical shape, then it is called an “Elliptical Cylinder”.

How to Calculate Height of a hollow cylinder?

Height of a hollow cylinder calculator uses Height=(Inner curved surface area)/(2*pi*Radius 1) to calculate the Height, The Height of a hollow cylinder formula is defined as the length of the hollow cylinder. Unit of length is Milimeter. Height and is denoted by h symbol.

How to calculate Height of a hollow cylinder using this online calculator? To use this online calculator for Height of a hollow cylinder, enter Inner curved surface area (Ai) and Radius 1 (r1) and hit the calculate button. Here is how the Height of a hollow cylinder calculation can be explained with given input values -> 1.447E-7 = (1E-05)/(2*pi*11).

FAQ

What is Height of a hollow cylinder?

The Height of a hollow cylinder formula is defined as the length of the hollow cylinder. Unit of length is Milimeter and is represented as h=(Ai)/(2*pi*r1) or Height=(Inner curved surface area)/(2*pi*Radius 1). Inner curved surface area is the area of the inner surface of the hollow cylinder and Radius 1 is a radial line from the focus to any point of a curve.

How to calculate Height of a hollow cylinder?

The Height of a hollow cylinder formula is defined as the length of the hollow cylinder. Unit of length is Milimeter is calculated using Height=(Inner curved surface area)/(2*pi*Radius 1). To calculate Height of a hollow cylinder, you need Inner curved surface area (Ai) and Radius 1 (r1). With our tool, you need to enter the respective value for Inner curved surface area and Radius 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Height?

In this formula, Height uses Inner curved surface area and Radius 1. We can use 11 other way(s) to calculate the same, which is/are as follows -

Height=4*Radius of Sphere/3
Height=4*Radius of Sphere
Height=Height of Cone/3
Height=4*Radius of Sphere/3
Height=Height of Cone/2
Height=0.75*Slant Height
Height=sqrt(Side C^2-0.25*(Side A-Side B)^2)
Height=(2*Area)/Sum of parallel sides of a trapezoid
Height=sqrt((Side A)^2+((Side B)^2/4))
Height=(2*Volume)/(Base*Length)
Height=Lateral Surface Area/(Side A+Side B+Side C)

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!