Height z above Surface given Standard Reference Wind Speed Calculator

✖Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration.ⓘ Wind Speed at Height of 10 m [V₁₀]			+10% -10%
✖Wind Speed is a fundamental atmospheric quantity caused by air moving from high to low pressure, usually due to changes in temperature.ⓘ Wind Speed [U]			+10% -10%

✖Height z above Surface where the Wind Speed is measured.ⓘ Height z above Surface given Standard Reference Wind Speed [Z]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Meteorology and Wave Climate Formulas PDF PDF Image

Height z above Surface given Standard Reference Wind Speed Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7
Z = 10/(V₁₀/U)^7
This formula uses 3 Variables

Variables Used

Height z above Surface - (Measured in Meter) - Height z above Surface where the Wind Speed is measured.
Wind Speed at Height of 10 m - (Measured in Meter per Second) - Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration.
Wind Speed - (Measured in Meter per Second) - Wind Speed is a fundamental atmospheric quantity caused by air moving from high to low pressure, usually due to changes in temperature.

STEP 1: Convert Input(s) to Base Unit

Wind Speed at Height of 10 m: 22 Meter per Second --> 22 Meter per Second No Conversion Required
Wind Speed: 4 Meter per Second --> 4 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Z = 10/(V₁₀/U)^7 --> 10/(22/4)^7

Evaluating ... ...

Z = 6.56842391335305E-05

STEP 3: Convert Result to Output's Unit

6.56842391335305E-05 Meter --> No Conversion Required

FINAL ANSWER

6.56842391335305E-05 ≈ 6.6E-5 Meter <-- Height z above Surface

(Calculation completed in 00.011 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Meteorology and Wave Climate » Estimating Marine and Coastal Winds » Height z above Surface given Standard Reference Wind Speed

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Estimating Marine and Coastal Winds Calculators

Wind Speed at Height z above Surface

LaTeX Go Wind Speed = (Friction Velocity/Von Kármán Constant)*ln(Height z above Surface/Roughness Height of Surface)

Wind Speed at Height z above Surface given Standard Reference Wind Speed

LaTeX Go Wind Speed = Wind Speed at Height of 10 m/(10/Height z above Surface)^(1/7)

Wind Speed at Standard 10-m Reference Level

LaTeX Go Wind Speed at Height of 10 m = Wind Speed*(10/Height z above Surface)^(1/7)

Height z above Surface given Standard Reference Wind Speed

LaTeX Go Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7

Height z above Surface given Standard Reference Wind Speed Formula

LaTeX Go

Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7
Z = 10/(V₁₀/U)^7

What is 10m wind?

Surface wind is the wind blowing near the Earth's surface. The wind 10m chart displays the modeled average wind vector in 10 m above the ground for every grid point of the model (ca. every 80 km). Generally the actual observed wind velocity at 10 m above ground is a little bit lower than the modeled one.

How to Calculate Height z above Surface given Standard Reference Wind Speed?

Height z above Surface given Standard Reference Wind Speed calculator uses Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7 to calculate the Height z above Surface, The Height z above Surface given Standard Reference Wind Speed formula is defined as a stretch above the surface at which standard reference wind Speed wind is measured. Height z above Surface is denoted by Z symbol.

How to calculate Height z above Surface given Standard Reference Wind Speed using this online calculator? To use this online calculator for Height z above Surface given Standard Reference Wind Speed, enter Wind Speed at Height of 10 m (V₁₀) & Wind Speed (U) and hit the calculate button. Here is how the Height z above Surface given Standard Reference Wind Speed calculation can be explained with given input values -> 6.6E-5 = 10/(22/4)^7.

FAQ

What is Height z above Surface given Standard Reference Wind Speed?

The Height z above Surface given Standard Reference Wind Speed formula is defined as a stretch above the surface at which standard reference wind Speed wind is measured and is represented as Z = 10/(V₁₀/U)^7 or Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7. Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration & Wind Speed is a fundamental atmospheric quantity caused by air moving from high to low pressure, usually due to changes in temperature.

How to calculate Height z above Surface given Standard Reference Wind Speed?

The Height z above Surface given Standard Reference Wind Speed formula is defined as a stretch above the surface at which standard reference wind Speed wind is measured is calculated using Height z above Surface = 10/(Wind Speed at Height of 10 m/Wind Speed)^7. To calculate Height z above Surface given Standard Reference Wind Speed, you need Wind Speed at Height of 10 m (V₁₀) & Wind Speed (U). With our tool, you need to enter the respective value for Wind Speed at Height of 10 m & Wind Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Spanish French German Russian Italian Portuguese Polish Dutch

Home

FREE PDFs

🔍 Search