Horse Power in Fluid Flow Solution

STEP 0: Pre-Calculation Summary
Formula Used
Engine Power = (Fluid Flow Rate*Absolute Pressure)/(1714)
HP = (Qflow rate*Pabs)/(1714)
This formula uses 3 Variables
Variables Used
Engine Power - (Measured in Watt) - Engine power is the power that the engine can put out.
Fluid Flow Rate - (Measured in Cubic Meter per Second) - Fluid flow rate is defined as the volume of water that passes through a given surface per unit time.
Absolute Pressure - (Measured in Pascal) - Absolute Pressure is labeled when any pressure is detected above the absolute zero of pressure.
STEP 1: Convert Input(s) to Base Unit
Fluid Flow Rate: 50 Cubic Meter per Second --> 50 Cubic Meter per Second No Conversion Required
Absolute Pressure: 100000 Pascal --> 100000 Pascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
HP = (Qflow rate*Pabs)/(1714) --> (50*100000)/(1714)
Evaluating ... ...
HP = 2917.1528588098
STEP 3: Convert Result to Output's Unit
2917.1528588098 Watt -->3.91196642019781 Horsepower (Check conversion ​here)
FINAL ANSWER
3.91196642019781 3.911966 Horsepower <-- Engine Power
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Shareef Alex
velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada
Shareef Alex has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

8 Heat Engine and Heat Pump Calculators

Carnot Cycle of Heat Pump
​ Go Carnot Cycle of Heat Pump = Heat from High Temperature Reservoir/(Heat from High Temperature Reservoir-Heat from Low Temperature Reservoir)
Carnot Cycle of Refrigerator
​ Go Carnot Cycle of Refrigerator = 1/(Heat from Low Temperature Reservoir/Heat from High Temperature Reservoir-1)
Work of Heat Pump
​ Go Work of Heat Pump = Heat from High Temperature Reservoir-Heat from Low Temperature Reservoir
Horse Power in Fluid Flow
​ Go Engine Power = (Fluid Flow Rate*Absolute Pressure)/(1714)
Air Fuel Ratio
​ Go Air to Fuel Ratio = Mass of Air/Mass of Fuel
Real Heat Engine
​ Go Real Heat Engine = Work of Heat Pump/Heat
Real Heat Pump
​ Go Real Heat Pump = Heat/Work of Heat Pump
Performance of Heat Pump
​ Go Heat Pump = Heat/Work of Heat Pump

Horse Power in Fluid Flow Formula

Engine Power = (Fluid Flow Rate*Absolute Pressure)/(1714)
HP = (Qflow rate*Pabs)/(1714)

What is the difference between flow rate and fluid velocity?


Flow is a measure of air output in terms of volume per unit of time. The common units are litres per minute, cubic feet per minute (CFM), etc. Velocity refers to how fast the air is moving in distance per unit of time.

What is the meaning of rate of flow of water?


Volumetric flow rate is defined as the volume of water that passes through a given surface per unit time. Or more simply, the speed at which water flows through a pipe. Water velocity, pipe diameter, and friction loss all influence volumetric flow rate.

How to Calculate Horse Power in Fluid Flow?

Horse Power in Fluid Flow calculator uses Engine Power = (Fluid Flow Rate*Absolute Pressure)/(1714) to calculate the Engine Power, The Horse power in fluid flow formula is defined as the power an engine produces. It's calculated through the power needed to move 550 pounds one foot in one second or by the power needs to move 33,000 pounds one foot in one minute. The power is gauged by the rate it takes to do the work. Engine Power is denoted by HP symbol.

How to calculate Horse Power in Fluid Flow using this online calculator? To use this online calculator for Horse Power in Fluid Flow, enter Fluid Flow Rate (Qflow rate) & Absolute Pressure (Pabs) and hit the calculate button. Here is how the Horse Power in Fluid Flow calculation can be explained with given input values -> 0.005246 = (50*100000)/(1714).

FAQ

What is Horse Power in Fluid Flow?
The Horse power in fluid flow formula is defined as the power an engine produces. It's calculated through the power needed to move 550 pounds one foot in one second or by the power needs to move 33,000 pounds one foot in one minute. The power is gauged by the rate it takes to do the work and is represented as HP = (Qflow rate*Pabs)/(1714) or Engine Power = (Fluid Flow Rate*Absolute Pressure)/(1714). Fluid flow rate is defined as the volume of water that passes through a given surface per unit time & Absolute Pressure is labeled when any pressure is detected above the absolute zero of pressure.
How to calculate Horse Power in Fluid Flow?
The Horse power in fluid flow formula is defined as the power an engine produces. It's calculated through the power needed to move 550 pounds one foot in one second or by the power needs to move 33,000 pounds one foot in one minute. The power is gauged by the rate it takes to do the work is calculated using Engine Power = (Fluid Flow Rate*Absolute Pressure)/(1714). To calculate Horse Power in Fluid Flow, you need Fluid Flow Rate (Qflow rate) & Absolute Pressure (Pabs). With our tool, you need to enter the respective value for Fluid Flow Rate & Absolute Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!