Incident Current using Transmitted Current Calculator

✖Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.ⓘ Transmitted Current [I_t]			+10% -10%
✖The load impedance is defined as the impedance of the load of the Transmission line during transient.ⓘ Load Impedance [I_l]			+10% -10%
✖The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.ⓘ Characteristic Impedance [Z₀]			+10% -10%

✖Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.ⓘ Incident Current using Transmitted Current [I_i]

⎘ Copy

👎

Formula

✖

Incident Current using Transmitted Current

Formula

`"I"_{"i"} = "I"_{"t"}*("I"_{"l"}+"Z"_{"0"})/(2*"I"_{"l"})`

Example

`"17.96075A"="4.8A"*("8.56Ω"+"55.5Ω")/(2*"8.56Ω")`

Calculator

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Incident Current using Transmitted Current Solution

STEP 0: Pre-Calculation Summary

Formula Used

Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance)
I_i = I_t*(I_l+Z₀)/(2*I_l)
This formula uses 4 Variables

Variables Used

Incident Current - (Measured in Ampere) - Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.
Transmitted Current - (Measured in Ampere) - Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.
Load Impedance - (Measured in Ohm) - The load impedance is defined as the impedance of the load of the Transmission line during transient.
Characteristic Impedance - (Measured in Ohm) - The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Transmitted Current: 4.8 Ampere --> 4.8 Ampere No Conversion Required
Load Impedance: 8.56 Ohm --> 8.56 Ohm No Conversion Required
Characteristic Impedance: 55.5 Ohm --> 55.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_i = I_t*(I_l+Z₀)/(2*I_l) --> 4.8*(8.56+55.5)/(2*8.56)

Evaluating ... ...

I_i = 17.9607476635514

STEP 3: Convert Result to Output's Unit

17.9607476635514 Ampere --> No Conversion Required

FINAL ANSWER

17.9607476635514 ≈ 17.96075 Ampere <-- Incident Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Travelling Waves » Transmitted Or Refracted Waves » Incident Current using Transmitted Current

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has verified this Calculator and 100+ more calculators!

< 7 Transmitted Or Refracted Waves Calculators

Load Impedance using Transmitted Current

Go Load Impedance = Transmitted Voltage*Characteristic Impedance/(2*Incident Current-Transmitted Current)

Incident Voltage using Transmitted Voltage

Go Incident Voltage = Transmitted Voltage*(Characteristic Impedance+Load Impedance)/(2*Load Impedance)

Incident Current using Transmitted Current

Go Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance)

Transmitted Voltage using Incident Current

Go Transmitted Voltage = 2*Incident Voltage*Load Impedance/(Load Impedance+Characteristic Impedance)

Transmitted Current using Incident Current

Go Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance)

Transmitted Current using Incident and Reflected Current

Go Transmitted Current = Incident Current+Reflected Current

Transmitted Voltage Transmitted Wave

Go Transmitted Voltage = Load Impedance*Transmitted Current

Incident Current using Transmitted Current Formula

Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance)
I_i = I_t*(I_l+Z₀)/(2*I_l)

Define transmitted waves.

The transmitted waves are the Voltage wave or current wave that is traveling through the Load of the Transmission line.

How to Calculate Incident Current using Transmitted Current?

Incident Current using Transmitted Current calculator uses Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance) to calculate the Incident Current, The Incident Current using Transmitted Current formula is defined as the current wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Current is denoted by I_i symbol.

How to calculate Incident Current using Transmitted Current using this online calculator? To use this online calculator for Incident Current using Transmitted Current, enter Transmitted Current (I_t), Load Impedance (I_l) & Characteristic Impedance (Z₀) and hit the calculate button. Here is how the Incident Current using Transmitted Current calculation can be explained with given input values -> 17.96075 = 4.8*(8.56+55.5)/(2*8.56).

FAQ

What is Incident Current using Transmitted Current?

The Incident Current using Transmitted Current formula is defined as the current wave that is traveling from the sending end to the receiving end of the Transmission line and is represented as I_i = I_t*(I_l+Z₀)/(2*I_l) or Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance). Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line, The load impedance is defined as the impedance of the load of the Transmission line during transient & The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

How to calculate Incident Current using Transmitted Current?

The Incident Current using Transmitted Current formula is defined as the current wave that is traveling from the sending end to the receiving end of the Transmission line is calculated using Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance). To calculate Incident Current using Transmitted Current, you need Transmitted Current (I_t), Load Impedance (I_l) & Characteristic Impedance (Z₀). With our tool, you need to enter the respective value for Transmitted Current, Load Impedance & Characteristic Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search