Incident Voltage using Transmitted Voltage (Line SC) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Incident Voltage = Transmitted Voltage/2
Vi = Vt/2
This formula uses 2 Variables
Variables Used
Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.
Transmitted Voltage - (Measured in Volt) - Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.
STEP 1: Convert Input(s) to Base Unit
Transmitted Voltage: 20 Volt --> 20 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vi = Vt/2 --> 20/2
Evaluating ... ...
Vi = 10
STEP 3: Convert Result to Output's Unit
10 Volt --> No Conversion Required
FINAL ANSWER
10 Volt <-- Incident Voltage
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

4 Line Is Short Circuited Calculators

Incident Current using Reflected Current (Line SC)
Go Incident Current = (-1)*Reflected Current
Reflected Current (Line SC)
Go Reflected Current = (-1)*Incident Current
Incident Voltage using Transmitted Voltage (Line SC)
Go Incident Voltage = Transmitted Voltage/2
Transmitted Voltage (Line SC)
Go Transmitted Voltage = 2*Incident Voltage

Incident Voltage using Transmitted Voltage (Line SC) Formula

Incident Voltage = Transmitted Voltage/2
Vi = Vt/2

Explain Short-Circuited Line for Travelling Waves.

The unique characteristic of the short circuit is that the voltage across it is zero. When an incident voltage wave E arrives at a short circuit, the reflected voltage wave must be – E to satisfy the condition that the voltage across the short circuit is zero.

How to Calculate Incident Voltage using Transmitted Voltage (Line SC)?

Incident Voltage using Transmitted Voltage (Line SC) calculator uses Incident Voltage = Transmitted Voltage/2 to calculate the Incident Voltage, The Incident Voltage using Transmitted Voltage (Line SC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line. Incident Voltage is denoted by Vi symbol.

How to calculate Incident Voltage using Transmitted Voltage (Line SC) using this online calculator? To use this online calculator for Incident Voltage using Transmitted Voltage (Line SC), enter Transmitted Voltage (Vt) and hit the calculate button. Here is how the Incident Voltage using Transmitted Voltage (Line SC) calculation can be explained with given input values -> 10 = 20/2.

FAQ

What is Incident Voltage using Transmitted Voltage (Line SC)?
The Incident Voltage using Transmitted Voltage (Line SC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line and is represented as Vi = Vt/2 or Incident Voltage = Transmitted Voltage/2. Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.
How to calculate Incident Voltage using Transmitted Voltage (Line SC)?
The Incident Voltage using Transmitted Voltage (Line SC) formula is defined as the voltage wave that is traveling from the sending end to the receiving end of the Transmission line is calculated using Incident Voltage = Transmitted Voltage/2. To calculate Incident Voltage using Transmitted Voltage (Line SC), you need Transmitted Voltage (Vt). With our tool, you need to enter the respective value for Transmitted Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!