Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period Calculator

✖The Drying Surface Area is the total area in the drying mass transfer operation i.e. exposed in contact with the drying medium.ⓘ Drying Surface Area [A]			+10% -10%
✖The Constant Rate Drying Time is the time taken for drying operation in the constant rate period.ⓘ Constant Rate Drying Time [t_c]			+10% -10%
✖The Rate of Constant Drying Period is the rate of drying that takes place for a given set of drying conditions in the constant rate period.ⓘ Rate of Constant Drying Period [N_c]			+10% -10%
✖The Final Weight of Moisture for Constant Rate Period is the amount of moisture in kg present in the solid after the completion of drying operation.ⓘ Final Weight of Moisture for Constant Rate Period [M_f(Constant)]			+10% -10%

✖The Initial Weight of Moisture for Constant Rate Period is the amount of moisture in kg present in the wet solid initially for drying operation.ⓘ Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period [M_i(Constant)]

⎘ Copy

👎

Formula

✖

Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period

Formula

`"M"_{"i(Constant)"} = ("A"*"t"_{"c"}*"N"_{"c"})+"M"_{"f(Constant)"}`

Example

`"53kg"=("0.1m²"*"190s"*"2kg/s/m²")+"15kg"`

Calculator

LaTeX

Reset

👍

Download Drying Formula PDF PDF Image

Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Weight of Moisture for Constant Rate = (Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)+Final Weight of Moisture for Constant Rate Period
M_i(Constant) = (A*t_c*N_c)+M_f(Constant)
This formula uses 5 Variables

Variables Used

Initial Weight of Moisture for Constant Rate - (Measured in Kilogram) - The Initial Weight of Moisture for Constant Rate Period is the amount of moisture in kg present in the wet solid initially for drying operation.
Drying Surface Area - (Measured in Square Meter) - The Drying Surface Area is the total area in the drying mass transfer operation i.e. exposed in contact with the drying medium.
Constant Rate Drying Time - (Measured in Second) - The Constant Rate Drying Time is the time taken for drying operation in the constant rate period.
Rate of Constant Drying Period - (Measured in Kilogram per Second per Square Meter) - The Rate of Constant Drying Period is the rate of drying that takes place for a given set of drying conditions in the constant rate period.
Final Weight of Moisture for Constant Rate Period - (Measured in Kilogram) - The Final Weight of Moisture for Constant Rate Period is the amount of moisture in kg present in the solid after the completion of drying operation.

STEP 1: Convert Input(s) to Base Unit

Drying Surface Area: 0.1 Square Meter --> 0.1 Square Meter No Conversion Required
Constant Rate Drying Time: 190 Second --> 190 Second No Conversion Required
Rate of Constant Drying Period: 2 Kilogram per Second per Square Meter --> 2 Kilogram per Second per Square Meter No Conversion Required
Final Weight of Moisture for Constant Rate Period: 15 Kilogram --> 15 Kilogram No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_i(Constant) = (A*t_c*N_c)+M_f(Constant) --> (0.1*190*2)+15

Evaluating ... ...

M_i(Constant) = 53

STEP 3: Convert Result to Output's Unit

53 Kilogram --> No Conversion Required

FINAL ANSWER

53 Kilogram <-- Initial Weight of Moisture for Constant Rate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Drying » Constant Rate Period Drying » Drying from Initial to Final Moisture » Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 11 Drying from Initial to Final Moisture Calculators

Drying Surface Area based on Initial to Final Moisture Content for Constant Rate Period

Go Drying Surface Area = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Final Moisture Content for Constant Rate Period)/(Constant Rate Drying Time*Rate of Constant Drying Period)

Dry Weight of Solid from Initial to Final Moisture Content for Constant Rate Period

Go Dry Weight of Solid = (Constant Rate Drying Time*Drying Surface Area*Rate of Constant Drying Period)/(Initial Moisture Content for Constant Rate Period-Final Moisture Content for Constant Rate Period)

Initial Moisture Content based on Final Moisture Content for Constant Rate Period

Go Initial Moisture Content for Constant Rate Period = ((Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)/Dry Weight of Solid)+Final Moisture Content for Constant Rate Period

Final Moisture Content based on Initial Moisture Content for Constant Rate Period

Go Final Moisture Content for Constant Rate Period = Initial Moisture Content for Constant Rate Period-((Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)/Dry Weight of Solid)

Rate of Constant Drying Period based on Final Moisture Content

Go Rate of Constant Drying Period = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Final Moisture Content for Constant Rate Period)/(Drying Surface Area*Constant Rate Drying Time)

Constant Drying Time from Initial to Final Moisture Content

Go Constant Rate Drying Time = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Final Moisture Content for Constant Rate Period)/(Drying Surface Area*Rate of Constant Drying Period)

Drying Surface Area based on Initial to Final Weight of Moisture for Constant Rate Period

Go Drying Surface Area = (Initial Weight of Moisture for Constant Rate-Final Weight of Moisture for Constant Rate Period)/(Constant Rate Drying Time*Rate of Constant Drying Period)

Rate of Constant Drying Period based on Final Weight of Moisture

Go Rate of Constant Drying Period = (Initial Weight of Moisture for Constant Rate-Final Weight of Moisture for Constant Rate Period)/(Drying Surface Area*Constant Rate Drying Time)

Constant Drying Time from Initial to Final Weight of Moisture

Go Constant Rate Drying Time = (Initial Weight of Moisture for Constant Rate-Final Weight of Moisture for Constant Rate Period)/(Drying Surface Area*Rate of Constant Drying Period)

Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period

Go Initial Weight of Moisture for Constant Rate = (Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)+Final Weight of Moisture for Constant Rate Period

Final Weight of Moisture based on Initial Weight of Moisture for Constant Rate Period

Go Final Weight of Moisture for Constant Rate Period = Initial Weight of Moisture for Constant Rate-(Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)

Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period Formula

What is Constant Rate Drying Period?

The constant rate drying period is a stage in the drying process where the rate of moisture removal from the material is constant and is determined by the drying conditions, such as temperature, humidity, and airflow. During this period, the moisture on the surface of the material is rapidly removed, resulting in a steep decline in the moisture content of the material.

How to Calculate Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period?

Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period calculator uses Initial Weight of Moisture for Constant Rate = (Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)+Final Weight of Moisture for Constant Rate Period to calculate the Initial Weight of Moisture for Constant Rate, The Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period formula is defined as the Initial weight of moisture based on drying till the final weight of moisture under the specified conditions of drying. Initial Weight of Moisture for Constant Rate is denoted by M_i(Constant) symbol.

How to calculate Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period using this online calculator? To use this online calculator for Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period, enter Drying Surface Area (A), Constant Rate Drying Time (t_c), Rate of Constant Drying Period (N_c) & Final Weight of Moisture for Constant Rate Period (M_f(Constant)) and hit the calculate button. Here is how the Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period calculation can be explained with given input values -> 53 = (0.1*190*2)+15.

FAQ

What is Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period?

The Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period formula is defined as the Initial weight of moisture based on drying till the final weight of moisture under the specified conditions of drying and is represented as M_i(Constant) = (A*t_c*N_c)+M_f(Constant) or Initial Weight of Moisture for Constant Rate = (Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)+Final Weight of Moisture for Constant Rate Period. The Drying Surface Area is the total area in the drying mass transfer operation i.e. exposed in contact with the drying medium, The Constant Rate Drying Time is the time taken for drying operation in the constant rate period, The Rate of Constant Drying Period is the rate of drying that takes place for a given set of drying conditions in the constant rate period & The Final Weight of Moisture for Constant Rate Period is the amount of moisture in kg present in the solid after the completion of drying operation.

How to calculate Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period?

The Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period formula is defined as the Initial weight of moisture based on drying till the final weight of moisture under the specified conditions of drying is calculated using Initial Weight of Moisture for Constant Rate = (Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)+Final Weight of Moisture for Constant Rate Period. To calculate Initial Weight of Moisture based on Final Weight of Moisture for Constant Rate Period, you need Drying Surface Area (A), Constant Rate Drying Time (t_c), Rate of Constant Drying Period (N_c) & Final Weight of Moisture for Constant Rate Period (M_f(Constant)). With our tool, you need to enter the respective value for Drying Surface Area, Constant Rate Drying Time, Rate of Constant Drying Period & Final Weight of Moisture for Constant Rate Period and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search