Calculator A to Z

Leakage of fluid past a rod Calculator

HomePhysics ↺
PhysicsMachine Design ↺
Machine DesignPacking and seals ↺
Packing and sealsPackingless seals ↺
✖The Radial Clearance is a measured value of the total movement of one ring relative to the other in a plane perpendicular to the bearing axis.ⓘ Radial Clearance [c]
+10%
-10%
✖Fluid pressure refers to the pressure exerted by both liquids and gas.ⓘ Fluid Pressure [p1
+10%
-10%
✖Fluid pressure refers to the pressure exerted by both liquids and gas.ⓘ Fluid Pressure [p2]
+10%
-10%
✖Diameter of bolt is a chord that runs through the center point of the circle.ⓘ Diameter of bolt [d]
+10%
-10%
✖The Absolute Viscosity of Oil is defined as the ratio of the product of tangential force and film thickness to the product of area and velocity of moving plate.ⓘ Absolute Viscosity of Oil [μ]
+10%
-10%
✖The Depth of U Collar is the distance from the top or surface to the bottom of U collar.ⓘ Depth of U Collar [l]
+10%
-10%
✖Actual discharge is given by the actual area and velocity.ⓘ Leakage of fluid past a rod [Q]
⎘ Copy
👎
Formula
Reset
👍

Leakage of fluid past a rod Solution

STEP 0: Pre-Calculation Summary
Formula Used
Actual discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of U Collar*12)
Q = 3.14*((c)^3)*(p1-p2)*d/(μ*l*12)
This formula uses 7 Variables
Variables Used
Actual discharge - (Measured in Meter³ per Second) - Actual discharge is given by the actual area and velocity.
Radial Clearance - (Measured in Meter) - The Radial Clearance is a measured value of the total movement of one ring relative to the other in a plane perpendicular to the bearing axis.
Fluid Pressure - (Measured in Pascal) - Fluid pressure refers to the pressure exerted by both liquids and gas.
Fluid Pressure - (Measured in Pascal) - Fluid pressure refers to the pressure exerted by both liquids and gas.
Diameter of bolt - (Measured in Meter) - Diameter of bolt is a chord that runs through the center point of the circle.
Absolute Viscosity of Oil - (Measured in Pascal Second) - The Absolute Viscosity of Oil is defined as the ratio of the product of tangential force and film thickness to the product of area and velocity of moving plate.
Depth of U Collar - (Measured in Meter) - The Depth of U Collar is the distance from the top or surface to the bottom of U collar.
STEP 1: Convert Input(s) to Base Unit
Radial Clearance: 0.9 Millimeter --> 0.0009 Meter (Check conversion here)
Fluid Pressure: 20 Pascal --> 20 Pascal No Conversion Required
Fluid Pressure: 10 Pascal --> 10 Pascal No Conversion Required
Diameter of bolt: 10 Millimeter --> 0.01 Meter (Check conversion here)
Absolute Viscosity of Oil: 0.5 Newton Second per Meter² --> 0.5 Pascal Second (Check conversion here)
Depth of U Collar: 0.6 Meter --> 0.6 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Q = 3.14*((c)^3)*(p12)*d/(μ*l*12) --> 3.14*((0.0009)^3)*(20-10)*0.01/(0.5*0.6*12)
Evaluating ... ...
Q = 6.3585E-11
STEP 3: Convert Result to Output's Unit
6.3585E-11 Meter³ per Second --> No Conversion Required
FINAL ANSWER
6.3585E-11 Meter³ per Second <-- Actual discharge
(Calculation completed in 00.047 seconds)
You are here -
Home » Physics » Machine Design » Packing and seals » Packingless seals » Leakage of fluid past a rod

Credits

Created by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has created this Calculator and 100+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2600+ more calculators!

4 Packingless seals Calculators

Diameter of bolt in terms of leakage of fluid
Diameter of bolt = (Discharge through orifice-(pi*(Radial Clearance^3)*(Fluid Pressure-Fluid Pressure)))*12*Depth of U Collar*Viscosity of oil Go
Radial clearance in terms of leakage
Radial Clearance = ((Discharge through orifice*12*Depth of U Collar*Viscosity of oil)/(3.14*(Fluid Pressure-Fluid Pressure)*Diameter of bolt))^1/3 Go
Leakage of fluid past a rod
Actual discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of U Collar*12) Go
Depth of U collar in terms of leakage
Depth of U Collar = 3.14*(Radial Clearance)^3*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*12*Actual discharge) Go

Leakage of fluid past a rod Formula

Actual discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of U Collar*12)
Q = 3.14*((c)^3)*(p1-p2)*d/(μ*l*12)

What is Leakage of fluid past a rod?

The Leakage of fluid past a rod formula is defined as the act or an instance of leaking.An amount lost as the result of leaking.

How to Calculate Leakage of fluid past a rod?

Leakage of fluid past a rod calculator uses Actual discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of U Collar*12) to calculate the Actual discharge, The Leakage of fluid past a rod formula is defined as the act or an instance of leaking. Actual discharge is denoted by Q symbol.

How to calculate Leakage of fluid past a rod using this online calculator? To use this online calculator for Leakage of fluid past a rod, enter Radial Clearance (c), Fluid Pressure (p1, Fluid Pressure (p2), Diameter of bolt (d), Absolute Viscosity of Oil (μ) & Depth of U Collar (l) and hit the calculate button. Here is how the Leakage of fluid past a rod calculation can be explained with given input values -> 6.359E-11 = 3.14*((0.0009)^3)*(20-10)*0.01/(0.5*0.6*12).

FAQ

What is Leakage of fluid past a rod?
The Leakage of fluid past a rod formula is defined as the act or an instance of leaking and is represented as Q = 3.14*((c)^3)*(p1-p2)*d/(μ*l*12) or Actual discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of U Collar*12). The Radial Clearance is a measured value of the total movement of one ring relative to the other in a plane perpendicular to the bearing axis, Fluid pressure refers to the pressure exerted by both liquids and gas, Fluid pressure refers to the pressure exerted by both liquids and gas, Diameter of bolt is a chord that runs through the center point of the circle, The Absolute Viscosity of Oil is defined as the ratio of the product of tangential force and film thickness to the product of area and velocity of moving plate & The Depth of U Collar is the distance from the top or surface to the bottom of U collar.
How to calculate Leakage of fluid past a rod?
The Leakage of fluid past a rod formula is defined as the act or an instance of leaking is calculated using Actual discharge = 3.14*((Radial Clearance)^3)*(Fluid Pressure-Fluid Pressure)*Diameter of bolt/(Absolute Viscosity of Oil*Depth of U Collar*12). To calculate Leakage of fluid past a rod, you need Radial Clearance (c), Fluid Pressure (p1, Fluid Pressure (p2), Diameter of bolt (d), Absolute Viscosity of Oil (μ) & Depth of U Collar (l). With our tool, you need to enter the respective value for Radial Clearance, Fluid Pressure, Fluid Pressure, Diameter of bolt, Absolute Viscosity of Oil & Depth of U Collar and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
About | Contact | Disclaimer | Terms
© 2011-2022 A softusvista inc. venture!


Share Image
Let Others Know
✖
LinkedIn
Email
WhatsApp
Copied!