Leg of Parallel Fillet Weld given Shear Stress Calculator

✖Load on parallel fillet weld is the force or the load applied perpendicular to the specimen cross-section.ⓘ Load on Parallel Fillet Weld [P]			+10% -10%
✖Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear stress in parallel fillet weld [𝜏]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%

✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Parallel Fillet Weld given Shear Stress [h_l]

⎘ Copy

👎

Formula

✖

Leg of Parallel Fillet Weld given Shear Stress

Formula

`"h"_{"l"} = "P"/("𝜏"*"L"*cos(pi/4))`

Example

`"21.19984mm"="111080N"/("38N/mm²"*"195mm"*cos(pi/4))`

Calculator

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF

Leg of Parallel Fillet Weld given Shear Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4))
h_l = P/(𝜏*L*cos(pi/4))
This formula uses 1 Constants, 1 Functions, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Load on Parallel Fillet Weld - (Measured in Newton) - Load on parallel fillet weld is the force or the load applied perpendicular to the specimen cross-section.
Shear stress in parallel fillet weld - (Measured in Pascal) - Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.

STEP 1: Convert Input(s) to Base Unit

Load on Parallel Fillet Weld: 111080 Newton --> 111080 Newton No Conversion Required
Shear stress in parallel fillet weld: 38 Newton per Square Millimeter --> 38000000 Pascal (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_l = P/(𝜏*L*cos(pi/4)) --> 111080/(38000000*0.195*cos(pi/4))

Evaluating ... ...

h_l = 0.0211998437933068

STEP 3: Convert Result to Output's Unit

0.0211998437933068 Meter -->21.1998437933068 Millimeter (Check conversion here)

FINAL ANSWER

21.1998437933068 ≈ 21.19984 Millimeter <-- Leg of Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Parallel Fillet Welds » Leg of Parallel Fillet Weld given Shear Stress

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 15 Parallel Fillet Welds Calculators

Length of Parallel Fillet Weld given Shear Stress and Weld Cut Angle

Go Length of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Leg of Weld*Shear stress in parallel fillet weld)

Leg of Parallel Fillet Weld given Shear Stress and Weld Cut Angle

Go Leg of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Shear stress in parallel fillet weld)

Shear Stress in Parallel Fillet Weld given Load

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Leg of Weld)

Force in Parallel Fillet Weld given Shear Stress

Go Load on Parallel Fillet Weld = Shear stress in parallel fillet weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))

Length of Parallel Fillet Weld given Shear Stress

Go Length of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Leg of Weld*cos(pi/4))

Leg of Parallel Fillet Weld given Shear Stress

Go Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4))

Shear Stress Parallel Fillet Weld

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(Length of Weld*Leg of Weld*cos(pi/4))

Width of Plane in Double Parallel Fillet Weld

Go Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))

Maximum Shear Stress in Parallel Fillet Weld given Load

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Tensile Force on Parallel Fillet Weld Plate given Shear Stress

Go Load on Parallel Fillet Weld = Shear stress in parallel fillet weld*Length of Weld*Leg of Weld*0.707

Shear Stress in Double Parallel Fillet Weld

Go Shearing Stress = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Allowable Load in Parallel Fillet Weld per Unit Length

Go Allowable Load per unit Length of Weld = 0.707*Shear stress in parallel fillet weld*Leg of Weld

Leg of Parallel Fillet Weld given Throat of Weld

Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Leg of Parallel Fillet Weld given Shear Stress Formula

Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4))
h_l = P/(𝜏*L*cos(pi/4))

Why do we use Leg of Weld even when its imaginary ?

The Leg of Weld is the lengths of the base of an imaginary right-angled triangle that can be inscribed within the actual weld. It determines the size of the weld and influences the Throat of Weld thus helping in determining the actual strength of the joint. The Leg of Weld is usually equal to the plate thickness.

How to Calculate Leg of Parallel Fillet Weld given Shear Stress?

Leg of Parallel Fillet Weld given Shear Stress calculator uses Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4)) to calculate the Leg of Weld, Leg of Parallel Fillet Weld given Shear Stress is a measure of the size of the parallel fillet weld required that can resist yield when subjected to shear under a certain applied load. Leg of Weld is denoted by h_l symbol.

How to calculate Leg of Parallel Fillet Weld given Shear Stress using this online calculator? To use this online calculator for Leg of Parallel Fillet Weld given Shear Stress, enter Load on Parallel Fillet Weld (P), Shear stress in parallel fillet weld (𝜏) & Length of Weld (L) and hit the calculate button. Here is how the Leg of Parallel Fillet Weld given Shear Stress calculation can be explained with given input values -> 21199.84 = 111080/(38000000*0.195*cos(pi/4)).

FAQ

What is Leg of Parallel Fillet Weld given Shear Stress?

Leg of Parallel Fillet Weld given Shear Stress is a measure of the size of the parallel fillet weld required that can resist yield when subjected to shear under a certain applied load and is represented as h_l = P/(𝜏*L*cos(pi/4)) or Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4)). Load on parallel fillet weld is the force or the load applied perpendicular to the specimen cross-section, Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress & The Length of Weld is the linear distance of the welding segment joined by the welded joint.

How to calculate Leg of Parallel Fillet Weld given Shear Stress?

Leg of Parallel Fillet Weld given Shear Stress is a measure of the size of the parallel fillet weld required that can resist yield when subjected to shear under a certain applied load is calculated using Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4)). To calculate Leg of Parallel Fillet Weld given Shear Stress, you need Load on Parallel Fillet Weld (P), Shear stress in parallel fillet weld (𝜏) & Length of Weld (L). With our tool, you need to enter the respective value for Load on Parallel Fillet Weld, Shear stress in parallel fillet weld & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Leg of Weld?

In this formula, Leg of Weld uses Load on Parallel Fillet Weld, Shear stress in parallel fillet weld & Length of Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Leg of Weld = Throat Thickness of Weld/cos(pi/4)
Leg of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Shear stress in parallel fillet weld)

Home

FREE PDFs

🔍 Search