Length of pin of knuckle joint in contact with the eye end Calculator

Main Category	Physics ↺
Physics	Machine Design ↺
Machine Design	Design of Machine Elements ↺
Design of Machine Elements	Design of Knuckle Joint ↺

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Compressive Stress in Pin is the compressive stress induced into the pin, the force per unit area tending to cause deformation of the pin.ⓘ Compressive Stress in Pin [σ_c]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Length of Pin in Eye End is the length of the knuckle pin which is inside the eye of a knuckle joint.ⓘ Length of pin of knuckle joint in contact with the eye end [l]

⎘ Copy

👎

Formula

Reset

👍

Credits

Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2600+ more calculators!

Length of pin of knuckle joint in contact with the eye end Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin)
l = L/(σ_c*d)
This formula uses 3 Variables

Variables Used

Load on Knuckle Joint - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts. (Measured in Newton)
Compressive Stress in Pin - Compressive Stress in Pin is the compressive stress induced into the pin, the force per unit area tending to cause deformation of the pin. (Measured in Newton per Square Millimeter)
Diameter of Knuckle Pin - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint. (Measured in Millimeter)

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Compressive Stress in Pin: 30 Newton per Square Millimeter --> 30000000 Pascal (Check conversion here)
Diameter of Knuckle Pin: 38 Millimeter --> 0.038 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = L/(σ_c*d) --> 50000/(30000000*0.038)

Evaluating ... ...

l = 0.043859649122807

STEP 3: Convert Result to Output's Unit

0.043859649122807 Meter -->43.859649122807 Millimeter (Check conversion here)

FINAL ANSWER

43.859649122807 Millimeter <-- Length of Pin in Eye End

(Calculation completed in 00.016 seconds)

You are here

Home »
Physics »
Machine Design »
Design of Machine Elements »
Design of Knuckle Joint »
Length of pin of knuckle joint in contact with the eye end

< 10+ Design of Knuckle Joint Calculators

Compressive stress in pin inside fork of knuckle joint given load and pin dimensions

Compressive Stress in Pin = Load on Knuckle Joint/(2*(Thickess of Fork Eye of Knuckle Joint)*Diameter of Knuckle Pin) Go

Diameter of pin of knuckle joint given load and shear stress in pin

Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*(Shear Stress in Pin))) Go

Diameter of rod of knuckle joint given tensile stress in rod

Diameter of rod = sqrt((4*Load on Knuckle Joint)/(pi*(Tensile Stress In Rod))) Go

Compressive stress in pin inside eye of knuckle joint given load and pin dimensions

Compressive Stress in Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin) Go

Diameter of pin of knuckle joint given compressive stress in eye end portion of pin

Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Pin*Thickess of Eye of Knuckle Joint) Go

Length of pin of knuckle joint in contact with the eye end

Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin) Go

Shear stress in pin of knuckle joint given load and pin diameter

Shear Stress in Pin = (2*Load on Knuckle Joint)/(pi*(Diameter of Knuckle Pin^2)) Go

Tensile stress in rod of knuckle joint

Tensile Stress In Rod = (4*Load on Knuckle Joint)/(pi*(Diameter of rod^2)) Go

Diameter of rod of knuckle joint given its enlarged diameter near the joint

Diameter of rod = Enlarged Diameter of Rod/1.1 Go

Enlarged Diameter of rod of knuckle joint near the joint

Enlarged Diameter of Rod = 1.1*Diameter of rod Go

Length of pin of knuckle joint in contact with the eye end Formula

Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin)
l = L/(σ_c*d)

What is a mechanical joint?

A mechanical joint is a section of a machine that is used to connect one or more mechanical parts to another. Mechanical joints may be temporary or permanent, most types are designed to be disassembled. Most mechanical joints are designed to allow relative movement of these mechanical parts of the machine in one degree of freedom, and restrict movement in one or more others.

How to Calculate Length of pin of knuckle joint in contact with the eye end?

Length of pin of knuckle joint in contact with the eye end calculator uses Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin) to calculate the Length of Pin in Eye End, The Length of pin of knuckle joint in contact with the eye end is the length of the knuckle pin that is inside the eye of a knuckle joint and is subjected to crushing stress from the eye. Length of Pin in Eye End is denoted by l symbol.

How to calculate Length of pin of knuckle joint in contact with the eye end using this online calculator? To use this online calculator for Length of pin of knuckle joint in contact with the eye end, enter Load on Knuckle Joint (L), Compressive Stress in Pin (σ_c) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Length of pin of knuckle joint in contact with the eye end calculation can be explained with given input values -> 43.85965 = 50000/(30000000*0.038).

FAQ

What is Length of pin of knuckle joint in contact with the eye end?

The Length of pin of knuckle joint in contact with the eye end is the length of the knuckle pin that is inside the eye of a knuckle joint and is subjected to crushing stress from the eye and is represented as l = L/(σ_c*d) or Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Compressive Stress in Pin is the compressive stress induced into the pin, the force per unit area tending to cause deformation of the pin & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Length of pin of knuckle joint in contact with the eye end?

The Length of pin of knuckle joint in contact with the eye end is the length of the knuckle pin that is inside the eye of a knuckle joint and is subjected to crushing stress from the eye is calculated using Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin). To calculate Length of pin of knuckle joint in contact with the eye end, you need Load on Knuckle Joint (L), Compressive Stress in Pin (σ_c) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Compressive Stress in Pin & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!