🔍
🔍

## Credits

Kethavath Srinath has created this Calculator and 500+ more calculators!
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1000+ more calculators!

## Length of the Pitch When Pitch Circle Diameter is Given Solution

STEP 0: Pre-Calculation Summary
Formula Used
pitch = Pitch Circle Diameter*sin(180/Number of teeth)
P = D*sin(180/z)
This formula uses 1 Functions, 2 Variables
Functions Used
sin - Trigonometric sine function, sin(Angle)
Variables Used
Pitch Circle Diameter - Pitch Circle Diameter is the diameter of the pitch circle. (Measured in Millimeter)
Number of teeth- The Number of teeth Value: Number of teeth
STEP 1: Convert Input(s) to Base Unit
Pitch Circle Diameter: 0.001 Millimeter --> 1E-06 Meter (Check conversion here)
Number of teeth: 23 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = D*sin(180/z) --> 1E-06*sin(180/23)
Evaluating ... ...
P = 9.99610968711745E-07
STEP 3: Convert Result to Output's Unit
9.99610968711745E-07 Meter --> No Conversion Required
9.99610968711745E-07 Meter <-- Pitch
(Calculation completed in 00.007 seconds)

## < 10+ Design of Chain Drives Calculators

Number of Teeth on the Sprocket When Pitch Circle Diameter is Given
number_of_teeth = 180*(pi/180)*asin(Pitch Circle Diameter/Pitch) Go
Velocity Ratio of the Chain Drives
velocity_ratio = Angular speed of the driving member in rpm/Angular speed of the driven member in rpm Go
Number of Teeth on the Driven Sprocket When Velocity of the Chain Drives is Given
number_of_teeth_on_driven_sprocket = Number of Teeth on Driving Sprocket*Velocity ratio Go
Number of Teeth on Driving Sprocket When Velocity of the Chain Drives is Given
number_of_teeth_on_driving_sprocket = Number of Teeth on Driven Sprocket/Velocity ratio Go
Speed of Rotation of the Driving Shaft When Velocity Ratio of the Chain Drives is Given
angular_speed_driving_rpm = Velocity ratio*Angular speed of the driven member in rpm Go
Speed of Rotation of the Driven Shaft When Velocity Ratio of the Chain Drives is Given
angular_speed_driven_rpm = Angular speed of the driving member in rpm/Velocity ratio Go
Length of the Pitch When Pitch Circle Diameter is Given
pitch = Pitch Circle Diameter*sin(180/Number of teeth) Go
Pitch Circle Diameter in terms of Pitch
pitch_circle_diameter = Pitch/sin(180/Number of teeth) Go
Pitch Angle of the Sprocket
pitch_angle = 2*3.14/Number of teeth Go
Number of Teeth on the Sprocket When Pitch Angle of the Sprocket is Given
number_of_teeth = 360/Pitch Angle Go

### Length of the Pitch When Pitch Circle Diameter is Given Formula

pitch = Pitch Circle Diameter*sin(180/Number of teeth)
P = D*sin(180/z)

## Define Sprocket?

A sprocket, sprocket-wheel or chainwheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which radial projections engage a chain passing over it..

## How to Calculate Length of the Pitch When Pitch Circle Diameter is Given?

Length of the Pitch When Pitch Circle Diameter is Given calculator uses pitch = Pitch Circle Diameter*sin(180/Number of teeth) to calculate the Pitch, The Length of the Pitch When Pitch Circle Diameter is Given formula is defined as the distance between two identical points on two adjacent teeth of the sprocket. Pitch and is denoted by P symbol.

How to calculate Length of the Pitch When Pitch Circle Diameter is Given using this online calculator? To use this online calculator for Length of the Pitch When Pitch Circle Diameter is Given, enter Pitch Circle Diameter (D) and Number of teeth (z) and hit the calculate button. Here is how the Length of the Pitch When Pitch Circle Diameter is Given calculation can be explained with given input values -> 9.996E-7 = 1E-06*sin(180/23).

### FAQ

What is Length of the Pitch When Pitch Circle Diameter is Given?
The Length of the Pitch When Pitch Circle Diameter is Given formula is defined as the distance between two identical points on two adjacent teeth of the sprocket and is represented as P = D*sin(180/z) or pitch = Pitch Circle Diameter*sin(180/Number of teeth). Pitch Circle Diameter is the diameter of the pitch circle and The Number of teeth Value: Number of teeth.
How to calculate Length of the Pitch When Pitch Circle Diameter is Given?
The Length of the Pitch When Pitch Circle Diameter is Given formula is defined as the distance between two identical points on two adjacent teeth of the sprocket is calculated using pitch = Pitch Circle Diameter*sin(180/Number of teeth). To calculate Length of the Pitch When Pitch Circle Diameter is Given, you need Pitch Circle Diameter (D) and Number of teeth (z). With our tool, you need to enter the respective value for Pitch Circle Diameter and Number of teeth and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Pitch?
In this formula, Pitch uses Pitch Circle Diameter and Number of teeth. We can use 10 other way(s) to calculate the same, which is/are as follows -
• pitch_angle = 2*3.14/Number of teeth
• number_of_teeth = 360/Pitch Angle
• pitch_circle_diameter = Pitch/sin(180/Number of teeth)
• pitch = Pitch Circle Diameter*sin(180/Number of teeth)
• number_of_teeth = 180*(pi/180)*asin(Pitch Circle Diameter/Pitch)
• velocity_ratio = Angular speed of the driving member in rpm/Angular speed of the driven member in rpm
• angular_speed_driving_rpm = Velocity ratio*Angular speed of the driven member in rpm
• angular_speed_driven_rpm = Angular speed of the driving member in rpm/Velocity ratio
• number_of_teeth_on_driving_sprocket = Number of Teeth on Driven Sprocket/Velocity ratio
• number_of_teeth_on_driven_sprocket = Number of Teeth on Driving Sprocket*Velocity ratio
Where is the Length of the Pitch When Pitch Circle Diameter is Given calculator used?
Among many, Length of the Pitch When Pitch Circle Diameter is Given calculator is widely used in real life applications like {FormulaUses}. Here are few more real life examples -
{FormulaExamplesList}
Let Others Know