Line-to-line RMS voltage Calculator

Category	Engineering ↺
Engineering	Electronics ↺
Electronics	Power Electronics ↺
Power-Electronics	Inverters ↺
Inverters	Three phase inverters ↺

✖Input voltage is the voltage supplied to the deviceⓘ Input voltage [V_i]

+10%

-10%

✖Root mean square voltage is the square root of the time average of the voltage squared.ⓘ Line-to-line RMS voltage [Vrms]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Devyaani Garg

Shiv Nadar University (SNU), Greater Noida

Devyaani Garg has created this Calculator and 50+ more calculators!

Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 500+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Voltage across output in an amplifier

Output voltage =Open circuit voltage gain*Input voltage*(Load resistance/(Load resistance+Output resistance)) GO

Current in finite open-loop gain in operational amplifier

Electric Current=(Input voltage+Output voltage /Open Loop Gain of an Operational Amplifier)/Resistance GO

Output voltage of Finite Open-Loop Gain of an operational amplifier

Output Voltage=(Electric Current*Resistance-Input voltage)*Open Loop Gain of an Operational Amplifier GO

Output voltage of noninverting configuration

Output voltage of noninverting configuration=Input voltage+(Input voltage/Resistance)*Resistance GO

Shunt Current (LSR)

Shunt Field Current=((Input voltage-Output voltage )/Shunt field resistance)-Load current GO

Output Voltage (LSR)

Output voltage =Input voltage-(Load current+Shunt Field Current)*Shunt field resistance GO

Load Current (LSR)

Load current=(Input voltage-Output voltage /Shunt field resistance)-Shunt Field Current GO

Discharging current of dv/dt protection thyristor circuits

Discharging current of thyristor circuit=Input voltage/((Resistance+Resistance)) GO

Closed-loop gain of an operational amplifier

Closed loop gain =Output voltage /Input voltage GO

Short-Circuit Transconductance

Transconductance=output current /Input voltage GO

Open-Circuit Voltage Gain

voltage gain=Output voltage /Input voltage GO

< 5 Other formulas that calculate the same Output

RMS Voltage When Reactive Power Is Given

Root mean square voltage=Reactive Power/(root mean square current*sin(Theta)) GO

RMS Voltage When Real Power Is Given

Root mean square voltage=Real power/(root mean square current*cos(Theta)) GO

Line-to-neutral voltage

Root mean square voltage=0.4714*Input voltage GO

RMS Voltage for the Full-wave Rectifier

Root mean square voltage=Peak Voltage*0.707 GO

RMS Voltage for half-wave Rectifier

Root mean square voltage=Peak Voltage/2 GO

Line-to-line RMS voltage Formula

Root mean square voltage=0.8165*Input voltage
Vrms=0.8165*V<sub>i</sub>

More formulas

RMS output voltage GO

RMS value of fundamental component of voltage for half bridge GO

RMS value of fundamental component of voltage for full bridge GO

Equivalent resistance in all three modes of operation GO

RMS of fundamental component of line-to-line voltage GO

Line-to-neutral voltage GO

Time when the current becomes maximum for unidirectional switches GO

Maximum output frequency for unidirectional switches GO

Maximum output frequency for bidirectional switches GO

What is the meaning of root mean square?

The root mean square value of a quantity is the square root of the mean value of the squared values of the quantity taken over an interval. AC voltages are always given as RMS values because this allows a sensible comparison to be made with steady DC voltages.

How to Calculate Line-to-line RMS voltage?

Line-to-line RMS voltage calculator uses Root mean square voltage=0.8165*Input voltage to calculate the Root mean square voltage, The Line-to-line RMS voltage formula is the root mean square value of the line-to-line voltage of the inverter. Root mean square voltage and is denoted by Vrms symbol.

How to calculate Line-to-line RMS voltage using this online calculator? To use this online calculator for Line-to-line RMS voltage, enter Input voltage (V_i) and hit the calculate button. Here is how the Line-to-line RMS voltage calculation can be explained with given input values -> 0.8165 = 0.8165*1.

FAQ

What is Line-to-line RMS voltage?

The Line-to-line RMS voltage formula is the root mean square value of the line-to-line voltage of the inverter and is represented as Vrms=0.8165*V_i or Root mean square voltage=0.8165*Input voltage. Input voltage is the voltage supplied to the device.

How to calculate Line-to-line RMS voltage?

The Line-to-line RMS voltage formula is the root mean square value of the line-to-line voltage of the inverter is calculated using Root mean square voltage=0.8165*Input voltage. To calculate Line-to-line RMS voltage, you need Input voltage (V_i). With our tool, you need to enter the respective value for Input voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Root mean square voltage?

In this formula, Root mean square voltage uses Input voltage. We can use 5 other way(s) to calculate the same, which is/are as follows -

Root mean square voltage=Reactive Power/(root mean square current*sin(Theta))
Root mean square voltage=Real power/(root mean square current*cos(Theta))
Root mean square voltage=Peak Voltage*0.707
Root mean square voltage=Peak Voltage/2
Root mean square voltage=0.4714*Input voltage

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!