Load Current using Line Losses (DC Two-Wire US) Calculator

✖Line Losses is defined as the losses that are produced in the line.ⓘ Line Losses [P_line]			+10% -10%
✖Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.ⓘ Resistance underground DC [R₁]			+10% -10%

✖Current underground DC is defined as the current flowing through the overhead ac supply wire.ⓘ Load Current using Line Losses (DC Two-Wire US) [C₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF

Load Current using Line Losses (DC Two-Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Current underground DC = sqrt(Line Losses/(2*Resistance underground DC))
C₁ = sqrt(P_line/(2*R₁))
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Current underground DC - (Measured in Ampere) - Current underground DC is defined as the current flowing through the overhead ac supply wire.
Line Losses - (Measured in Watt) - Line Losses is defined as the losses that are produced in the line.
Resistance underground DC - (Measured in Ohm) - Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.

STEP 1: Convert Input(s) to Base Unit

Line Losses: 0.6 Watt --> 0.6 Watt No Conversion Required
Resistance underground DC: 5 Ohm --> 5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C₁ = sqrt(P_line/(2*R₁)) --> sqrt(0.6/(2*5))

Evaluating ... ...

C₁ = 0.244948974278318

STEP 3: Convert Result to Output's Unit

0.244948974278318 Ampere --> No Conversion Required

FINAL ANSWER

0.244948974278318 ≈ 0.244949 Ampere <-- Current underground DC

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground DC Supply » 2 Wire System » Current and Voltage » Load Current using Line Losses (DC Two-Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Current and Voltage Calculators

Maximum Voltage using Area of X-Section (DC Two-Wire US)

LaTeX Go Maximum Voltage = sqrt(2*(Power Transmitted^2)*Resistivity*Length of Wire DC/(Line Losses*Area of underground dc wire))

Maximum Voltage using Line Losses (DC Two-Wire US)

LaTeX Go Maximum Voltage = sqrt(2*(Power Transmitted^2)*Resistance underground DC/(Line Losses))

Load Current using Line Losses (DC Two-Wire US)

LaTeX Go Current underground DC = sqrt(Line Losses/(2*Resistance underground DC))

Load Current using Line Losses (DC Two-Wire US) Formula

LaTeX Go

Current underground DC = sqrt(Line Losses/(2*Resistance underground DC))
C₁ = sqrt(P_line/(2*R₁))

What is the volume of conductor material in DC Two-Wire underground system?

The volume of conductor material required in this system is 1 times that of a 2-wire d.c.system with the one conductor earthed.

How to Calculate Load Current using Line Losses (DC Two-Wire US)?

Load Current using Line Losses (DC Two-Wire US) calculator uses Current underground DC = sqrt(Line Losses/(2*Resistance underground DC)) to calculate the Current underground DC, The Load Current using Line Losses (DC Two-Wire US) formula is defined as the current that flows into the load of the DC Two-Wire underground system. Current underground DC is denoted by C₁ symbol.

How to calculate Load Current using Line Losses (DC Two-Wire US) using this online calculator? To use this online calculator for Load Current using Line Losses (DC Two-Wire US), enter Line Losses (P_line) & Resistance underground DC (R₁) and hit the calculate button. Here is how the Load Current using Line Losses (DC Two-Wire US) calculation can be explained with given input values -> 0.244949 = sqrt(0.6/(2*5)).

FAQ

What is Load Current using Line Losses (DC Two-Wire US)?

The Load Current using Line Losses (DC Two-Wire US) formula is defined as the current that flows into the load of the DC Two-Wire underground system and is represented as C₁ = sqrt(P_line/(2*R₁)) or Current underground DC = sqrt(Line Losses/(2*Resistance underground DC)). Line Losses is defined as the losses that are produced in the line & Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.

How to calculate Load Current using Line Losses (DC Two-Wire US)?

The Load Current using Line Losses (DC Two-Wire US) formula is defined as the current that flows into the load of the DC Two-Wire underground system is calculated using Current underground DC = sqrt(Line Losses/(2*Resistance underground DC)). To calculate Load Current using Line Losses (DC Two-Wire US), you need Line Losses (P_line) & Resistance underground DC (R₁). With our tool, you need to enter the respective value for Line Losses & Resistance underground DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Spanish French German Russian Italian Portuguese Polish Dutch

Home FREE PDFs

🔍 Search