Load Given Production of Scrap by Machines Calculator

✖Production Required in Scraper Production is the amount of scrap produced.ⓘ Production Required in Scraper Production [P_s]			+10% -10%
✖Trips per Hour means the total transfer occured in a hour.ⓘ Trips per Hour [f]			+10% -10%

✖Load in Scraper Production is the volume of scrap produced in every trip.ⓘ Load Given Production of Scrap by Machines [L]

⎘ Copy

👎

Formula

✖

Load Given Production of Scrap by Machines

Formula

`"L" = ("P"_{"s"}/"f")`

Example

`"18.75m³"=("75.00m³/hr"/"4rev/h")`

Calculator

LaTeX

Reset

👍

Download Scraper Production Formulas PDF

Load Given Production of Scrap by Machines Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)
L = (P_s/f)
This formula uses 3 Variables

Variables Used

Load in Scraper Production - (Measured in Cubic Meter) - Load in Scraper Production is the volume of scrap produced in every trip.
Production Required in Scraper Production - (Measured in Cubic Meter per Second) - Production Required in Scraper Production is the amount of scrap produced.
Trips per Hour - (Measured in Hertz) - Trips per Hour means the total transfer occured in a hour.

STEP 1: Convert Input(s) to Base Unit

Production Required in Scraper Production: 75 Cubic Meter per Hour --> 0.0208333333333333 Cubic Meter per Second (Check conversion here)
Trips per Hour: 4 Revolution per Hour --> 0.00111111111111111 Hertz (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = (P_s/f) --> (0.0208333333333333/0.00111111111111111)

Evaluating ... ...

L = 18.75

STEP 3: Convert Result to Output's Unit

18.75 Cubic Meter --> No Conversion Required

FINAL ANSWER

18.75 Cubic Meter <-- Load in Scraper Production

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Load Given Production of Scrap by Machines

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 25 Scraper Production Calculators

Speed at Haul and Return in Miles per Hour given Variable Time

Go Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production)

Variable Time when Haul and Return Distance is in Feet

Go Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production)

Return Distance in Feet given Variable Time

Go Return Distance in Foot in Scraper Production = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Haul Distance in Feet

Haul Distance in Feet given Variable Time

Go Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production

Speed at Haul and Return in Kilometer per Hour given Variable Time

Go Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production)

Return Distance in Meter given Variable Time

Go Return Distance in Meter = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Haul Distance

Haul Distance in Meter given Variable Time

Go Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter

Production Required to Determine Number of Scrapers

Go Production Required in Scraper Production = (Bank in Scraper Production/Time in Scraper Production in Hour)

Working Time given Production Required

Go Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production)

Quantity given Production Required

Go Bank in Scraper Production = (Production Required in Scraper Production*Time in Scraper Production in Hour)

Production Required given Number of Scrapers Needed for Job

Go Production Required in Scraper Production = Number of Scraper in Scraper Production*Production per Unit

Trips per Hour given Production of Scrap by Machines

Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Number of Scrapers Needed for Job

Go Number of Scraper = (Production Required in Scraper Production/Production per Unit)

Density of Material given Quantity of Scrap Produced

Go Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper)

Weight of Load Given Quantity of Scrap Produced

Go Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production)

Bank or Quantity of Scrap Produced

Go Bank in Scraper = (Weight of Load Scrap/Density of Material in Scraper Production)

Scraper Cycle Time given Number of Scrapers Pusher can Load

Go Scraper Cycle Time = (Number of Scraper a Pusher*Pusher Cycle Time)

Pusher Cycle Time given Number of Scrapers Pusher can Load

Go Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher)

Number of Scrapers Pusher can Load

Go Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time)

Working Time given Trips per Hour for Excavating Scrap

Go Working Time in Scraper Production = (Trips per Hour*Cycle Time)

Cycle Time given Trips per Hour for Excavating Scrap

Go Cycle Time = (Working Time in Scraper Production/Trips per Hour)

Trips per Hour for Excavating Scrap

Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Production per Unit Given Number of Scrapers Needed for Job

Go Production per Unit = (Production Required/Number of Scraper)

Load Given Production of Scrap by Machines Formula

Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)
L = (P_s/f)

What is Scrap?

Scrap means waste that either has no economic value or only the value of its basic material content recoverable through recycling. In ERPNext, at the end of manufacturing process, scrap items are accounted in the scrap warehouses.

How to Calculate Load Given Production of Scrap by Machines?

Load Given Production of Scrap by Machines calculator uses Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour) to calculate the Load in Scraper Production, The Load Given Production of Scrap by Machines is defined as the volume of load when we have prior information of production and trips. Load in Scraper Production is denoted by L symbol.

How to calculate Load Given Production of Scrap by Machines using this online calculator? To use this online calculator for Load Given Production of Scrap by Machines, enter Production Required in Scraper Production (P_s) & Trips per Hour (f) and hit the calculate button. Here is how the Load Given Production of Scrap by Machines calculation can be explained with given input values -> 18.75 = (0.0208333333333333/0.00111111111111111).

FAQ

What is Load Given Production of Scrap by Machines?

The Load Given Production of Scrap by Machines is defined as the volume of load when we have prior information of production and trips and is represented as L = (P_s/f) or Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour). Production Required in Scraper Production is the amount of scrap produced & Trips per Hour means the total transfer occured in a hour.

How to calculate Load Given Production of Scrap by Machines?

The Load Given Production of Scrap by Machines is defined as the volume of load when we have prior information of production and trips is calculated using Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour). To calculate Load Given Production of Scrap by Machines, you need Production Required in Scraper Production (P_s) & Trips per Hour (f). With our tool, you need to enter the respective value for Production Required in Scraper Production & Trips per Hour and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search