Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load Calculator

✖Maximum Initial Deflection is the greatest amount of displacement or bending that occurs in a mechanical structure or component when a load is first applied.ⓘ Maximum Initial Deflection [C]			+10% -10%
✖Modulus of Elasticity of Column is a quantity that measures column's resistance to being deformed elastically when stress is applied to it.ⓘ Modulus of Elasticity of Column [ε_column]			+10% -10%
✖Moment of Inertia is the measure of the resistance of a body to angular acceleration about a given axis.ⓘ Moment of Inertia [I]			+10% -10%
✖Axial Thrust is the force exerted along the axis of a shaft in mechanical systems. It occurs when there is an imbalance of forces that acts in the direction parallel to the axis of rotation.ⓘ Axial Thrust [P_axial]			+10% -10%
✖Column Length is the distance between two points where a column gets its fixity of support so its movement is restrained in all directions.ⓘ Column Length [l_column]			+10% -10%

✖Load Intensity is the distribution of load over a certain area or length of a structural element.ⓘ Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load [q_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load Intensity = Maximum Initial Deflection/((1*(Modulus of Elasticity of Column*Moment of Inertia/(Axial Thrust^2))*((sec((Column Length/2)*(Axial Thrust/(Modulus of Elasticity of Column*Moment of Inertia))))-1))-(1*(Column Length^2)/(8*Axial Thrust)))
q_f = C/((1*(ε_column*I/(P_axial^2))*((sec((l_column/2)*(P_axial/(ε_column*I))))-1))-(1*(l_column^2)/(8*P_axial)))
This formula uses 1 Functions, 6 Variables

Functions Used

sec - Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine., sec(Angle)

Variables Used

Load Intensity - (Measured in Pascal) - Load Intensity is the distribution of load over a certain area or length of a structural element.
Maximum Initial Deflection - (Measured in Meter) - Maximum Initial Deflection is the greatest amount of displacement or bending that occurs in a mechanical structure or component when a load is first applied.
Modulus of Elasticity of Column - (Measured in Pascal) - Modulus of Elasticity of Column is a quantity that measures column's resistance to being deformed elastically when stress is applied to it.
Moment of Inertia - (Measured in Meter⁴) - Moment of Inertia is the measure of the resistance of a body to angular acceleration about a given axis.
Axial Thrust - (Measured in Newton) - Axial Thrust is the force exerted along the axis of a shaft in mechanical systems. It occurs when there is an imbalance of forces that acts in the direction parallel to the axis of rotation.
Column Length - (Measured in Meter) - Column Length is the distance between two points where a column gets its fixity of support so its movement is restrained in all directions.

STEP 1: Convert Input(s) to Base Unit

Maximum Initial Deflection: 30 Millimeter --> 0.03 Meter (Check conversion here)
Modulus of Elasticity of Column: 10.56 Megapascal --> 10560000 Pascal (Check conversion here)
Moment of Inertia: 5600 Centimeter⁴ --> 5.6E-05 Meter⁴ (Check conversion here)
Axial Thrust: 1500 Newton --> 1500 Newton No Conversion Required
Column Length: 5000 Millimeter --> 5 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q_f = C/((1*(ε_column*I/(P_axial^2))*((sec((l_column/2)*(P_axial/(ε_column*I))))-1))-(1*(l_column^2)/(8*P_axial))) --> 0.03/((1*(10560000*5.6E-05/(1500^2))*((sec((5/2)*(1500/(10560000*5.6E-05))))-1))-(1*(5^2)/(8*1500)))

Evaluating ... ...

q_f = -14.4030742757908

STEP 3: Convert Result to Output's Unit

-14.4030742757908 Pascal -->-1.44030742757908E-05 Megapascal (Check conversion here)

FINAL ANSWER

-1.44030742757908E-05 ≈ -1.4E-5 Megapascal <-- Load Intensity

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Strut With Lateral Load » Mechanical » Strut Subjected to Compressive Axial Thrust and a Transverse Uniformly Distributed Load » Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Strut Subjected to Compressive Axial Thrust and a Transverse Uniformly Distributed Load Calculators

Bending Moment at Section for Strut subjected to Compressive Axial and Uniformly Distributed Load

LaTeX Go Bending Moment in Column = -(Axial Thrust*Deflection at Section of Column)+(Load Intensity*(((Distance of Deflection from End A^2)/2)-(Column Length*Distance of Deflection from End A/2)))

Deflection at Section for Strut Subjected to Compressive Axial and Uniformly Distributed Load

LaTeX Go Deflection at Section of Column = (-Bending Moment in Column+(Load Intensity*(((Distance of Deflection from End A^2)/2)-(Column Length*Distance of Deflection from End A/2))))/Axial Thrust

Axial Thrust for Strut Subjected to Compressive Axial and Uniformly Distributed Load

LaTeX Go Axial Thrust = (-Bending Moment in Column+(Load Intensity*(((Distance of Deflection from End A^2)/2)-(Column Length*Distance of Deflection from End A/2))))/Deflection at Section of Column

Load Intensity for Strut Subjected to Compressive Axial and Uniformly Distributed Load

LaTeX Go Load Intensity = (Bending Moment in Column+(Axial Thrust*Deflection at Section of Column))/(((Distance of Deflection from End A^2)/2)-(Column Length*Distance of Deflection from End A/2))

Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load Formula

LaTeX Go

What is Axial Thrust?

Axial thrust refers to a propelling force applied along the axis (also called axial direction) of an object in order to push the object against a platform in a particular direction.

How to Calculate Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load?

Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load calculator uses Load Intensity = Maximum Initial Deflection/((1*(Modulus of Elasticity of Column*Moment of Inertia/(Axial Thrust^2))*((sec((Column Length/2)*(Axial Thrust/(Modulus of Elasticity of Column*Moment of Inertia))))-1))-(1*(Column Length^2)/(8*Axial Thrust))) to calculate the Load Intensity, The Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load formula is defined as a measure of the maximum load a strut can withstand without collapsing, considering the effects of compressive axial thrust and transverse uniformly distributed load on the strut's deflection. Load Intensity is denoted by q_f symbol.

How to calculate Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load using this online calculator? To use this online calculator for Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load, enter Maximum Initial Deflection (C), Modulus of Elasticity of Column (ε_column), Moment of Inertia (I), Axial Thrust (P_axial) & Column Length (l_column) and hit the calculate button. Here is how the Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load calculation can be explained with given input values -> -1.4E-11 = 0.03/((1*(10560000*5.6E-05/(1500^2))*((sec((5/2)*(1500/(10560000*5.6E-05))))-1))-(1*(5^2)/(8*1500))).

FAQ

What is Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load?

The Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load formula is defined as a measure of the maximum load a strut can withstand without collapsing, considering the effects of compressive axial thrust and transverse uniformly distributed load on the strut's deflection and is represented as q_f = C/((1*(ε_column*I/(P_axial^2))*((sec((l_column/2)*(P_axial/(ε_column*I))))-1))-(1*(l_column^2)/(8*P_axial))) or Load Intensity = Maximum Initial Deflection/((1*(Modulus of Elasticity of Column*Moment of Inertia/(Axial Thrust^2))*((sec((Column Length/2)*(Axial Thrust/(Modulus of Elasticity of Column*Moment of Inertia))))-1))-(1*(Column Length^2)/(8*Axial Thrust))). Maximum Initial Deflection is the greatest amount of displacement or bending that occurs in a mechanical structure or component when a load is first applied, Modulus of Elasticity of Column is a quantity that measures column's resistance to being deformed elastically when stress is applied to it, Moment of Inertia is the measure of the resistance of a body to angular acceleration about a given axis, Axial Thrust is the force exerted along the axis of a shaft in mechanical systems. It occurs when there is an imbalance of forces that acts in the direction parallel to the axis of rotation & Column Length is the distance between two points where a column gets its fixity of support so its movement is restrained in all directions.

How to calculate Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load?

The Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load formula is defined as a measure of the maximum load a strut can withstand without collapsing, considering the effects of compressive axial thrust and transverse uniformly distributed load on the strut's deflection is calculated using Load Intensity = Maximum Initial Deflection/((1*(Modulus of Elasticity of Column*Moment of Inertia/(Axial Thrust^2))*((sec((Column Length/2)*(Axial Thrust/(Modulus of Elasticity of Column*Moment of Inertia))))-1))-(1*(Column Length^2)/(8*Axial Thrust))). To calculate Load Intensity given Max Deflection for Strut Subjected to Uniformly Distributed Load, you need Maximum Initial Deflection (C), Modulus of Elasticity of Column (ε_column), Moment of Inertia (I), Axial Thrust (P_axial) & Column Length (l_column). With our tool, you need to enter the respective value for Maximum Initial Deflection, Modulus of Elasticity of Column, Moment of Inertia, Axial Thrust & Column Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load Intensity?

In this formula, Load Intensity uses Maximum Initial Deflection, Modulus of Elasticity of Column, Moment of Inertia, Axial Thrust & Column Length. We can use 3 other way(s) to calculate the same, which is/are as follows -

Load Intensity = (Bending Moment in Column+(Axial Thrust*Deflection at Section of Column))/(((Distance of Deflection from End A^2)/2)-(Column Length*Distance of Deflection from End A/2))
Load Intensity = Maximum Bending Moment In Column/(Modulus of Elasticity of Column*Moment of Inertia/Axial Thrust)*((sec((Column Length/2)*(Axial Thrust/(Modulus of Elasticity of Column*Moment of Inertia))))-1)
Load Intensity = (-(Axial Thrust*Maximum Initial Deflection)-Maximum Bending Moment In Column)*8/((Column Length^2))

Home

FREE PDFs

🔍 Search