Long Diagonal of Rhombus given Area and Short Diagonal Calculator

✖Area of Rhombus is the amount of two-dimensional space occupied by the Rhombus.ⓘ Area of Rhombus [A]			+10% -10%
✖A Short Diagonal of Rhombus is a length of the line joining the obtuse angle corners of a Rhombus.ⓘ Short Diagonal of Rhombus [d_Short]			+10% -10%

✖The Long Diagonal of Rhombus is the length of line joining the acute angle corners of a Rhombus.ⓘ Long Diagonal of Rhombus given Area and Short Diagonal [d_Long]

⎘ Copy

👎

Formula

✖

Long Diagonal of Rhombus given Area and Short Diagonal

Formula

`"d"_{"Long"} = (2*"A")/("d"_{"Short"})`

Example

`"17.5m"=(2*"70m²")/("8m")`

Calculator

LaTeX

Reset

👍

Download Rhombus Formula PDF

Long Diagonal of Rhombus given Area and Short Diagonal Solution

STEP 0: Pre-Calculation Summary

Formula Used

Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus)
d_Long = (2*A)/(d_Short)
This formula uses 3 Variables

Variables Used

Long Diagonal of Rhombus - (Measured in Meter) - The Long Diagonal of Rhombus is the length of line joining the acute angle corners of a Rhombus.
Area of Rhombus - (Measured in Square Meter) - Area of Rhombus is the amount of two-dimensional space occupied by the Rhombus.
Short Diagonal of Rhombus - (Measured in Meter) - A Short Diagonal of Rhombus is a length of the line joining the obtuse angle corners of a Rhombus.

STEP 1: Convert Input(s) to Base Unit

Area of Rhombus: 70 Square Meter --> 70 Square Meter No Conversion Required
Short Diagonal of Rhombus: 8 Meter --> 8 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_Long = (2*A)/(d_Short) --> (2*70)/(8)

Evaluating ... ...

d_Long = 17.5

STEP 3: Convert Result to Output's Unit

17.5 Meter --> No Conversion Required

FINAL ANSWER

17.5 Meter <-- Long Diagonal of Rhombus

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 2D Geometry » Rhombus » Diagonal of Rhombus » Long Diagonal of Rhombus » Long Diagonal of Rhombus given Area and Short Diagonal

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< 9 Long Diagonal of Rhombus Calculators

Long Diagonal of Rhombus given Area

Go Long Diagonal of Rhombus = Area of Rhombus/(Side of Rhombus*sin(Acute Angle of Rhombus/2))

Long Diagonal of Rhombus given Short Diagonal and Acute Angle

Go Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus given Short Diagonal and Side

Go Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)

Long Diagonal of Rhombus given Inradius

Go Long Diagonal of Rhombus = (2*Inradius of Rhombus)/sin(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus given Perimeter

Go Long Diagonal of Rhombus = Perimeter of Rhombus/2*cos(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus given Obtuse angle

Go Long Diagonal of Rhombus = 2*Side of Rhombus*sin(Obtuse Angle of Rhombus/2)

Long Diagonal of Rhombus given Height

Go Long Diagonal of Rhombus = Height of Rhombus/sin(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus

Go Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus given Area and Short Diagonal

Go Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus)

< 8 Diagonal of Rhombus Calculators

Long Diagonal of Rhombus given Short Diagonal and Acute Angle

Go Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)

Short Diagonal of Rhombus given Long Diagonal and Acute Angle

Go Short Diagonal of Rhombus = Long Diagonal of Rhombus*tan(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus given Short Diagonal and Side

Go Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)

Short Diagonal of Rhombus given Long Diagonal and Side

Go Short Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Long Diagonal of Rhombus^2)

Short Diagonal of Rhombus

Go Short Diagonal of Rhombus = 2*Side of Rhombus*sin(Acute Angle of Rhombus/2)

Long Diagonal of Rhombus

Go Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)

Short Diagonal of Rhombus given Area and Long Diagonal

Go Short Diagonal of Rhombus = (2*Area of Rhombus)/(Long Diagonal of Rhombus)

Long Diagonal of Rhombus given Area and Short Diagonal

Go Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus)

Long Diagonal of Rhombus given Area and Short Diagonal Formula

Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus)
d_Long = (2*A)/(d_Short)

What is Rhombus?

A Rhombus is a special case of a parallelogram. In a Rhombus, opposite sides are parallel and the opposite angles are equal. Moreover, all the sides of a Rhombus are equal in length, and the diagonals bisect each other at right angles. The rhombus is also called a diamond or Rhombus diamond. The plural form of a Rhombus is Rhombi or Rhombuses.

How to Calculate Long Diagonal of Rhombus given Area and Short Diagonal?

Long Diagonal of Rhombus given Area and Short Diagonal calculator uses Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus) to calculate the Long Diagonal of Rhombus, Long Diagonal of Rhombus given Area and Short Diagonal formula is defined as the length of the line joining the acute angle corners of the Rhombus, calculated using the area and short diagonal of the Rhombus. Long Diagonal of Rhombus is denoted by d_Long symbol.

How to calculate Long Diagonal of Rhombus given Area and Short Diagonal using this online calculator? To use this online calculator for Long Diagonal of Rhombus given Area and Short Diagonal, enter Area of Rhombus (A) & Short Diagonal of Rhombus (d_Short) and hit the calculate button. Here is how the Long Diagonal of Rhombus given Area and Short Diagonal calculation can be explained with given input values -> 17.5 = (2*70)/(8).

FAQ

What is Long Diagonal of Rhombus given Area and Short Diagonal?

Long Diagonal of Rhombus given Area and Short Diagonal formula is defined as the length of the line joining the acute angle corners of the Rhombus, calculated using the area and short diagonal of the Rhombus and is represented as d_Long = (2*A)/(d_Short) or Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus). Area of Rhombus is the amount of two-dimensional space occupied by the Rhombus & A Short Diagonal of Rhombus is a length of the line joining the obtuse angle corners of a Rhombus.

How to calculate Long Diagonal of Rhombus given Area and Short Diagonal?

Long Diagonal of Rhombus given Area and Short Diagonal formula is defined as the length of the line joining the acute angle corners of the Rhombus, calculated using the area and short diagonal of the Rhombus is calculated using Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus). To calculate Long Diagonal of Rhombus given Area and Short Diagonal, you need Area of Rhombus (A) & Short Diagonal of Rhombus (d_Short). With our tool, you need to enter the respective value for Area of Rhombus & Short Diagonal of Rhombus and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Long Diagonal of Rhombus?

In this formula, Long Diagonal of Rhombus uses Area of Rhombus & Short Diagonal of Rhombus. We can use 11 other way(s) to calculate the same, which is/are as follows -

Long Diagonal of Rhombus = 2*Side of Rhombus*sin(Obtuse Angle of Rhombus/2)
Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)
Long Diagonal of Rhombus = Area of Rhombus/(Side of Rhombus*sin(Acute Angle of Rhombus/2))
Long Diagonal of Rhombus = Perimeter of Rhombus/2*cos(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = Height of Rhombus/sin(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = (2*Inradius of Rhombus)/sin(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)

Home

FREE PDFs

🔍 Search