🔍
🔍

## Credits

St Joseph's College (St Joseph's College), Bengaluru
Mona Gladys has created this Calculator and 1000+ more calculators!
Indian Institute of Information Technology (IIIT), Bhopal
Mridul Sharma has verified this Calculator and 1000+ more calculators!

## Long diameter of double cycloid given short diameter Solution

STEP 0: Pre-Calculation Summary
Formula Used
diameter = 2*pi*(diameter one/4)
d = 2*pi*(d1/4)
This formula uses 1 Constants, 1 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
diameter one - The diameter one is at the larger side (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
diameter one: 1 Millimeter --> 0.001 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
d = 2*pi*(d1/4) --> 2*pi*(0.001/4)
Evaluating ... ...
d = 0.0015707963267949
STEP 3: Convert Result to Output's Unit
0.0015707963267949 Meter --> No Conversion Required
0.0015707963267949 Meter <-- Diameter
(Calculation completed in 00.016 seconds)

## < 2 Other formulas that you can solve using the same Inputs

Pressure coefficient for Blunt-nosed plate:
pressure_coeff = 0.173*(Drag Coefficient^(2/3))/((Distance from Y-axis/diameter one)^(2/3)) Go
Short diameter of double cycloid given long diameter
diameter = 4*(diameter one/(2*pi)) Go

## < 11 Other formulas that calculate the same Output

Circle Diameter when Maximum Permissible Eccentricity for Spiral Columns is Given
diameter = (Maximum permissible eccentricity-0.14*Overall depth of column)/(0.43*Area ratio of cross sectional area to gross area*Force ratio of strengths of reinforcements) Go
Circle Diameter when Axial Load for Spiral Columns is Given
diameter = moment/(0.12*Total area*Yield strength of reinforcing steel) Go
Diameter of Roller or Rocker for milled surface when Allowable Stress is Given for d < 635 mm
diameter = 33.33*Allowable Bearing Stresses on Pins/(yield strength of steel-13) Go
Diameter of a Rod Circular Fin when area of cross-section is Given
diameter = sqrt((Cross sectional area*4)/pi) Go
Diameter of a circle when area is given
diameter = 2*sqrt(Area of Circle/pi) Go
Diameter bisecting chords of slope m to the parabola y2 = 4ax
diameter = (2*x coordinate of focus of parabola)/Slope of Line Go
Diameter of a circle when circumference is given
diameter = Circumference of Circle/pi Go
Diameter of a Nugget
diameter = 6*(Thickness)^1/2 Go
Diameter of a circular cylinder of maximum convex surface area in a given circular cone
diameter = Radius of cone Go
Diameter of a circle when radius is given
Diameter of Sphere

### Long diameter of double cycloid given short diameter Formula

diameter = 2*pi*(diameter one/4)
d = 2*pi*(d1/4)

## What is a double cycloid?

In geometry, a cycloid is the curve traced by a point on a circle as it rolls along a straight line without slipping. A cycloid is a specific form of trochoid and is an example of a roulette, a curve generated by a curve rolling on another curve. The cycloid, with the cusps pointing upward, is the curve of fastest descent under constant gravity (the brachistochrone curve). It is also the form of a curve for which the period of an object in simple harmonic motion (rolling up and down repetitively) along the curve does not depend on the object's starting position (the tautochrone curve), double cycloid is a cycloid mirrored at its straight side. The double cycloid looks like a mix of ellipse and pointed oval, but it has no vertices.

## How to Calculate Long diameter of double cycloid given short diameter?

Long diameter of double cycloid given short diameter calculator uses diameter = 2*pi*(diameter one/4) to calculate the Diameter, The Long diameter of double cycloid given short diameter formula is defined as measure of distance of the long points of double cycloid , where a = radius of double cycloid , c = base length of double cycloid. Diameter and is denoted by d symbol.

How to calculate Long diameter of double cycloid given short diameter using this online calculator? To use this online calculator for Long diameter of double cycloid given short diameter, enter diameter one (d1) and hit the calculate button. Here is how the Long diameter of double cycloid given short diameter calculation can be explained with given input values -> 0.001571 = 2*pi*(0.001/4).

### FAQ

What is Long diameter of double cycloid given short diameter?
The Long diameter of double cycloid given short diameter formula is defined as measure of distance of the long points of double cycloid , where a = radius of double cycloid , c = base length of double cycloid and is represented as d = 2*pi*(d1/4) or diameter = 2*pi*(diameter one/4). The diameter one is at the larger side.
How to calculate Long diameter of double cycloid given short diameter?
The Long diameter of double cycloid given short diameter formula is defined as measure of distance of the long points of double cycloid , where a = radius of double cycloid , c = base length of double cycloid is calculated using diameter = 2*pi*(diameter one/4). To calculate Long diameter of double cycloid given short diameter, you need diameter one (d1). With our tool, you need to enter the respective value for diameter one and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter?
In this formula, Diameter uses diameter one. We can use 11 other way(s) to calculate the same, which is/are as follows -
• diameter = Circumference of Circle/pi
• diameter = 2*sqrt(Area of Circle/pi)