Machining time for maximum power in Turning Calculator

✖Volume of Work Material Removed is the volume of work material removed during machining.ⓘ Volume of Work Material Removed [V_r]			+10% -10%
✖Specific Cutting Energy in Machining is the energy consumed to remove a unit volume of material, which is calculated as the ratio of cutting energy e to material removal volume v.ⓘ Specific Cutting Energy in Machining [p_s]			+10% -10%
✖Power Available for Machining is defined as the amount of power available during the machining process.ⓘ Power Available For Machining [P_m]			+10% -10%

✖Machining Time For Maximum Power is the time for processing when the workpiece is machined under maximum power conditions.ⓘ Machining time for maximum power in Turning [t_p]

⎘ Copy

👎

Formula

✖

Machining time for maximum power in Turning

Formula

`"t"_{"p"} = ("V"_{"r"}*"p"_{"s"})/"P"_{"m"}`

Example

`"48.925s"=("182.6237cm³"*"3000.487MJ/m³")/"11.20kW"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Machining time for maximum power in Turning Solution

STEP 0: Pre-Calculation Summary

Formula Used

Machining Time For Maximum Power = (Volume of Work Material Removed*Specific Cutting Energy in Machining)/Power Available For Machining
t_p = (V_r*p_s)/P_m
This formula uses 4 Variables

Variables Used

Machining Time For Maximum Power - (Measured in Second) - Machining Time For Maximum Power is the time for processing when the workpiece is machined under maximum power conditions.
Volume of Work Material Removed - (Measured in Cubic Meter) - Volume of Work Material Removed is the volume of work material removed during machining.
Specific Cutting Energy in Machining - (Measured in Joule per Cubic Meter) - Specific Cutting Energy in Machining is the energy consumed to remove a unit volume of material, which is calculated as the ratio of cutting energy e to material removal volume v.
Power Available For Machining - (Measured in Watt) - Power Available for Machining is defined as the amount of power available during the machining process.

STEP 1: Convert Input(s) to Base Unit

Volume of Work Material Removed: 182.6237 Cubic Centimeter --> 0.0001826237 Cubic Meter (Check conversion here)
Specific Cutting Energy in Machining: 3000.487 Megajoule per Cubic Meter --> 3000487000 Joule per Cubic Meter (Check conversion here)
Power Available For Machining: 11.2 Kilowatt --> 11200 Watt (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_p = (V_r*p_s)/P_m --> (0.0001826237*3000487000)/11200

Evaluating ... ...

t_p = 48.9250033698125

STEP 3: Convert Result to Output's Unit

48.9250033698125 Second --> No Conversion Required

FINAL ANSWER

48.9250033698125 ≈ 48.925 Second <-- Machining Time For Maximum Power

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Design for Machining » Theory of Maximum Power » Machining Time » Machining time for maximum power in Turning

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 19 Machining Time Calculators

Constant for machine type b given Machining time for maximum power

Go Constant For Tool Type(b) = 1-(ln(Density of Work Piece*Constant For Tool Type(a)*Machining Time For Maximum Power)-ln(Proportion of Initial Volume*Specific Cutting Energy in Machining))/ln(Initial Work Piece Weight)

Machining Time for optimum speed for Maximum Power given Machining Cost

Go Machining Time For Minimum Cost = Machining Time For Maximum Power*(((Machining And Operating Cost of Each Product/(Machining And Operating Rate*Machining Time For Maximum Power))-1)*(1-Taylor's Tool Life Exponent)/Taylor's Tool Life Exponent)^Taylor's Tool Life Exponent

Tool Changing Time for 1 Tool given Machining Cost for Maximum Power

Go Time to Change One Tool = ((Tool Life*((Machining And Operating Cost of Each Product/Machining Time For Maximum Power)-Machining And Operating Rate)/Time Proportion of Cutting Edge Engagement)-Cost of A Tool)/Machining And Operating Rate

Time Proportion of Cutting Edge Engagement for Maximum Power delivery given Machining Cost

Go Time Proportion of Cutting Edge Engagement = Tool Life*((Machining And Operating Cost of Each Product/Machining Time For Maximum Power)-Machining And Operating Rate)/(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)

Tool Life for Maximum Power delivery given Machining Cost for Maximum Power

Go Tool Life = Time Proportion of Cutting Edge Engagement*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)/((Machining And Operating Cost of Each Product/Machining Time For Maximum Power)-Machining And Operating Rate)

Machining Time for Maximum Power given Machining Cost

Go Machining Time For Maximum Power = Machining And Operating Cost of Each Product/(Machining And Operating Rate+(Time Proportion of Cutting Edge Engagement*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)/Tool Life))

Machining time for maximum power given Initial weight of workpiece

Go Machining Time For Maximum Power = (Proportion of Initial Volume*Specific Cutting Energy in Machining*Initial Work Piece Weight^(1-Constant For Tool Type(b)))/(Density of Work Piece*Constant For Tool Type(a))

Constant for machine type given Machining time for maximum power

Go Constant For Tool Type(a) = (Proportion of Initial Volume*Specific Cutting Energy in Machining*Initial Work Piece Weight^(1-Constant For Tool Type(b)))/(Density of Work Piece*Machining Time For Maximum Power)

Diameter of workpiece terms of Machining time for maximum power

Go Diameter of Workpiece = (Machining Time For Maximum Power*Power Available For Machining)/(Specific Cutting Energy in Machining*pi*Length of Workpiece*Depth of Cut)

Depth of cut given Machining time for maximum power

Go Depth of Cut = (Machining Time For Maximum Power*Power Available For Machining)/(Specific Cutting Energy in Machining*pi*Length of Workpiece*Diameter of Workpiece)

Diameter of Workpiece given Surface Generation rate

Go Diameter of Workpiece For Surface Generation = (Machining Time For Minimum Cost*Surface Generation Rate)/(pi*Length of Workpiece)

Length of Workpiece given Surface Generation rate

Go Length of Workpiece For Surface Generation = (Machining Time For Minimum Cost*Surface Generation Rate)/(pi*Diameter of Workpiece)

Power available for Machining given Machining time for maximum power

Go Power Available For Machining For Maximum Power = (60*Volume of Work Material Removed*Specific Cutting Energy in Machining)/Machining Time For Maximum Power

Volume of material to be removed given Machining time for maximum power

Go Volume of Work Material Removed = (Machining Time For Maximum Power*Power Available For Machining)/(Specific Cutting Energy in Machining)

Specific cutting energy given Machining time for maximum power

Go Specific Cutting Energy in Machining = (Machining Time For Maximum Power*Power Available For Machining)/(Volume of Work Material Removed)

Machining time for maximum power in Turning

Go Machining Time For Maximum Power = (Volume of Work Material Removed*Specific Cutting Energy in Machining)/Power Available For Machining

Surface Generation Rate

Go Surface Generation Rate For Machining Time = (Surface Area of Workpiece)/Machining Time For Minimum Cost

Machining Time for Minimum Cost given Surface Generation rate

Go Machining Surface Time For Minimum Cost = (Surface Area of Workpiece)/Surface Generation Rate

Machining time under Max power for free machining

Go Machining Time For Free Machining = 49.9*Initial Work Piece Weight^0.47

Machining time for maximum power in Turning Formula

Machining Time For Maximum Power = (Volume of Work Material Removed*Specific Cutting Energy in Machining)/Power Available For Machining
t_p = (V_r*p_s)/P_m

What is turning and milling?

Turning and milling are two common machining processes that remove material from a workpiece with the assistance of a cutting tool. While similar, though, they use different methods to achieve this goal. Turning forces the workpiece to rotate, whereas milling forces the cutting tool to rotate.

How to Calculate Machining time for maximum power in Turning?

Machining time for maximum power in Turning calculator uses Machining Time For Maximum Power = (Volume of Work Material Removed*Specific Cutting Energy in Machining)/Power Available For Machining to calculate the Machining Time For Maximum Power, The Machining time for maximum power in Turning is the time for processing when the workpiece is machined under maximum power conditions. Machining Time For Maximum Power is denoted by t_p symbol.

How to calculate Machining time for maximum power in Turning using this online calculator? To use this online calculator for Machining time for maximum power in Turning, enter Volume of Work Material Removed (V_r), Specific Cutting Energy in Machining (p_s) & Power Available For Machining (P_m) and hit the calculate button. Here is how the Machining time for maximum power in Turning calculation can be explained with given input values -> 48.81796 = (0.0001826237*3000487000)/11200.

FAQ

What is Machining time for maximum power in Turning?

The Machining time for maximum power in Turning is the time for processing when the workpiece is machined under maximum power conditions and is represented as t_p = (V_r*p_s)/P_m or Machining Time For Maximum Power = (Volume of Work Material Removed*Specific Cutting Energy in Machining)/Power Available For Machining. Volume of Work Material Removed is the volume of work material removed during machining, Specific Cutting Energy in Machining is the energy consumed to remove a unit volume of material, which is calculated as the ratio of cutting energy e to material removal volume v & Power Available for Machining is defined as the amount of power available during the machining process.

How to calculate Machining time for maximum power in Turning?

The Machining time for maximum power in Turning is the time for processing when the workpiece is machined under maximum power conditions is calculated using Machining Time For Maximum Power = (Volume of Work Material Removed*Specific Cutting Energy in Machining)/Power Available For Machining. To calculate Machining time for maximum power in Turning, you need Volume of Work Material Removed (V_r), Specific Cutting Energy in Machining (p_s) & Power Available For Machining (P_m). With our tool, you need to enter the respective value for Volume of Work Material Removed, Specific Cutting Energy in Machining & Power Available For Machining and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Machining Time For Maximum Power?

In this formula, Machining Time For Maximum Power uses Volume of Work Material Removed, Specific Cutting Energy in Machining & Power Available For Machining. We can use 2 other way(s) to calculate the same, which is/are as follows -

Machining Time For Maximum Power = Machining And Operating Cost of Each Product/(Machining And Operating Rate+(Time Proportion of Cutting Edge Engagement*(Machining And Operating Rate*Time to Change One Tool+Cost of A Tool)/Tool Life))
Machining Time For Maximum Power = (Proportion of Initial Volume*Specific Cutting Energy in Machining*Initial Work Piece Weight^(1-Constant For Tool Type(b)))/(Density of Work Piece*Constant For Tool Type(a))

Home

FREE PDFs

🔍 Search