Machine infeed speed given Feed speed in Grinding Calculator

✖The Feed Speed is the Feed given against a workpiece per unit time.ⓘ The Feed Speed [V_F]			+10% -10%
✖The Diameter of Grinding Tool Wheel is the diameter of the wheel used for the grinding.ⓘ The Diameter of Grinding Tool Wheel [d_T]			+10% -10%

✖Machine Infeed speed towards workpiece is the speed at which the wheel is moving towards the workpiece.ⓘ Machine infeed speed given Feed speed in Grinding [V_i]

⎘ Copy

👎

Formula

✖

Machine infeed speed given Feed speed in Grinding

Formula

`"V"_{"i"} = "V"_{"F"}+("d"_{"T"}/2)`

Example

`"9.495mm/s"="3.49mm/s"+("12.01mm"/2)`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Machine infeed speed given Feed speed in Grinding Solution

STEP 0: Pre-Calculation Summary

Formula Used

Machine Infeed speed towards workpiece = The Feed Speed+(The Diameter of Grinding Tool Wheel/2)
V_i = V_F+(d_T/2)
This formula uses 3 Variables

Variables Used

Machine Infeed speed towards workpiece - (Measured in Meter per Second) - Machine Infeed speed towards workpiece is the speed at which the wheel is moving towards the workpiece.
The Feed Speed - (Measured in Meter per Second) - The Feed Speed is the Feed given against a workpiece per unit time.
The Diameter of Grinding Tool Wheel - (Measured in Meter) - The Diameter of Grinding Tool Wheel is the diameter of the wheel used for the grinding.

STEP 1: Convert Input(s) to Base Unit

The Feed Speed: 3.49 Millimeter per Second --> 0.00349 Meter per Second (Check conversion here)
The Diameter of Grinding Tool Wheel: 12.01 Millimeter --> 0.01201 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_i = V_F+(d_T/2) --> 0.00349+(0.01201/2)

Evaluating ... ...

V_i = 0.009495

STEP 3: Convert Result to Output's Unit

0.009495 Meter per Second -->9.495 Millimeter per Second (Check conversion here)

FINAL ANSWER

9.495 Millimeter per Second <-- Machine Infeed speed towards workpiece

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Cylindrical Grinding cycle » Wheel » Machine infeed speed given Feed speed in Grinding

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< 19 Wheel Calculators

Diameter of wheel given feed and machine infeed speed

Go The Diameter of Grinding Tool Wheel = The wheel removal parameter*Workpiece diameter/(((Machine Infeed speed towards workpiece/The Feed Speed)-1)*Workpiece Removal Parameter)

Constant for grinding wheel given maximum undeformed chip thickness

Go Constant for particular grinding wheel = (Maximum Undeformed Chip Thickness before machining^2)*The Surface speed of wheel/(Surface Speed of Workpiece*sqrt(Feed))

Surface speed of Wheel given constant for grinding wheel

Go The Surface speed of wheel = (Constant for particular grinding wheel*Surface Speed of Workpiece*sqrt(Feed))/(Maximum Undeformed Chip Thickness before machining^2)

Constant for grinding wheel

Go Constant for particular grinding wheel = 6/(Number of active grains per Area on wheel surface*Grain aspect ratio*sqrt(The Diameter of Grinding Tool Wheel))

Surface speed of wheel given number of chip produce per time

Go Surface speed of wheel for given no of chips = The Number of Chip Produced per Unit Time/(Width of grinding path*Number of active grains per Area on wheel surface)

Wheel diameter given equivalent wheel diameter

Go The Diameter of Grinding Tool Wheel = Equivalent Wheel Diameter*Workpiece diameter/(Workpiece diameter-Equivalent Wheel Diameter)

Diameter of wheel given Constant for grinding wheel

Go The Diameter of Grinding Tool Wheel = (6/(Number of active grains per Area on wheel surface*Grain aspect ratio*Constant for particular grinding wheel))^2

Equivalent wheel diameter

Go Equivalent Wheel Diameter = The Diameter of Grinding Tool Wheel/(1+(The Diameter of Grinding Tool Wheel/Workpiece diameter))

Diameter of wheel for given Average Length of chip

Go The Diameter of Grinding Tool Wheel = 2*The Length of Chip/sin(Angle made by the length of the chip)

Diameter of wheel for given infeed

Go The Diameter of Grinding Tool Wheel = 2*Feed/(1-cos(Angle made by the length of the chip))

Wheel structure Number given Percentage Volume of Bond material in wheel

Go Structure Number of Wheel = (The Percentage volume of bond material in grinding+8-(1.33*The wheel hardness number))/2.2

Wheel hardness Number given Percentage Volume of Bond material in wheel

Go The wheel hardness number = (The Percentage volume of bond material in grinding+8-(2.2*Structure Number of Wheel))/1.33

Threshold thrust force given wheel removal parameter

Go Threshold thrust force = Thrust force-(Wheel removal rate/The wheel removal parameter)

Thrust force given wheel removal parameter

Go Thrust force = (Wheel removal rate/The wheel removal parameter)+Threshold thrust force

Machine infeed speed given Feed speed in Grinding

Go Machine Infeed speed towards workpiece = The Feed Speed+(The Diameter of Grinding Tool Wheel/2)

Diameter of wheel given Feed speed in Grinding

Go The Diameter of Grinding Tool Wheel = 2*(Machine Infeed speed towards workpiece-The Feed Speed)

Feed speed in Grinding

Go The Feed Speed = Machine Infeed speed towards workpiece-(The Diameter of Grinding Tool Wheel/2)

Diameter of wheel given Average length of chip and Infeed

Go The Diameter of Grinding Tool Wheel = (The Length of Chip)^2/Feed

Grain Diameter of grinding wheel

Go Grain diameter of the grinding wheel = 0.0254/Grain size (in mm)

Machine infeed speed given Feed speed in Grinding Formula

Machine Infeed speed towards workpiece = The Feed Speed+(The Diameter of Grinding Tool Wheel/2)
V_i = V_F+(d_T/2)

What is infeed grinding?

Infeed grinding is a method of grinding in which the part is held stationary while the wheel is fed into the workpiece. Infeed grinding is used to grind parts with relatively complex shapes with multiple diameters and tolerances.

How to Calculate Machine infeed speed given Feed speed in Grinding?

Machine infeed speed given Feed speed in Grinding calculator uses Machine Infeed speed towards workpiece = The Feed Speed+(The Diameter of Grinding Tool Wheel/2) to calculate the Machine Infeed speed towards workpiece, The Machine infeed speed given Feed speed in Grinding is the speed at which the wheel is moving towards the workpiece. Machine Infeed speed towards workpiece is denoted by V_i symbol.

How to calculate Machine infeed speed given Feed speed in Grinding using this online calculator? To use this online calculator for Machine infeed speed given Feed speed in Grinding, enter The Feed Speed (V_F) & The Diameter of Grinding Tool Wheel (d_T) and hit the calculate button. Here is how the Machine infeed speed given Feed speed in Grinding calculation can be explained with given input values -> 9490 = 0.00349+(0.01201/2).

FAQ

What is Machine infeed speed given Feed speed in Grinding?

The Machine infeed speed given Feed speed in Grinding is the speed at which the wheel is moving towards the workpiece and is represented as V_i = V_F+(d_T/2) or Machine Infeed speed towards workpiece = The Feed Speed+(The Diameter of Grinding Tool Wheel/2). The Feed Speed is the Feed given against a workpiece per unit time & The Diameter of Grinding Tool Wheel is the diameter of the wheel used for the grinding.

How to calculate Machine infeed speed given Feed speed in Grinding?

The Machine infeed speed given Feed speed in Grinding is the speed at which the wheel is moving towards the workpiece is calculated using Machine Infeed speed towards workpiece = The Feed Speed+(The Diameter of Grinding Tool Wheel/2). To calculate Machine infeed speed given Feed speed in Grinding, you need The Feed Speed (V_F) & The Diameter of Grinding Tool Wheel (d_T). With our tool, you need to enter the respective value for The Feed Speed & The Diameter of Grinding Tool Wheel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search