Machine infeed speed given workpiece and wheel removal parameter Calculator

✖Feed Speed is the distance a cutting tool travels during one spindle revolution.ⓘ Feed Speed [V_f]			+10% -10%
✖The wheel removal parameter is the ratio of the volume of wheel removed per unit time per unit thrust force.ⓘ Wheel Removal Parameter [Λ_t]			+10% -10%
✖The Diameter of Workpiece is defined as the diameter of the workpiece which is undergoing grinding.ⓘ Diameter of Workpiece [d_w]			+10% -10%
✖Workpiece removal parameter is the ratio of the volume of workpiece removed per unit time per unit thrust force in grinding process.ⓘ Workpiece Removal Parameter [Λ_w]			+10% -10%
✖The Diameter of Grinding Tool Wheel is the diameter of the wheel, which is used for the grinding process.ⓘ Diameter of Grinding Tool Wheel [d_t]			+10% -10%

✖Machine Infeed speed is the speed at which the wheel is moving towards the workpiece.ⓘ Machine infeed speed given workpiece and wheel removal parameter [V_i]

⎘ Copy

👎

Formula

✖

Machine infeed speed given workpiece and wheel removal parameter

Formula

`"V"_{"i"} = "V"_{"f"}*(1+("Λ"_{"t"}*"d"_{"w"}/("Λ"_{"w"}*"d"_{"t"})))`

Example

`"225.8281mm/s"="203.6043mm/s"*(1+("2.4"*"227.4mm"/("10"*"500mm")))`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Machine infeed speed given workpiece and wheel removal parameter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Machine Infeed speed = Feed Speed*(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel)))
V_i = V_f*(1+(Λ_t*d_w/(Λ_w*d_t)))
This formula uses 6 Variables

Variables Used

Machine Infeed speed - (Measured in Meter per Second) - Machine Infeed speed is the speed at which the wheel is moving towards the workpiece.
Feed Speed - (Measured in Meter per Second) - Feed Speed is the distance a cutting tool travels during one spindle revolution.
Wheel Removal Parameter - The wheel removal parameter is the ratio of the volume of wheel removed per unit time per unit thrust force.
Diameter of Workpiece - (Measured in Meter) - The Diameter of Workpiece is defined as the diameter of the workpiece which is undergoing grinding.
Workpiece Removal Parameter - Workpiece removal parameter is the ratio of the volume of workpiece removed per unit time per unit thrust force in grinding process.
Diameter of Grinding Tool Wheel - (Measured in Meter) - The Diameter of Grinding Tool Wheel is the diameter of the wheel, which is used for the grinding process.

STEP 1: Convert Input(s) to Base Unit

Feed Speed: 203.6043 Millimeter per Second --> 0.2036043 Meter per Second (Check conversion here)
Wheel Removal Parameter: 2.4 --> No Conversion Required
Diameter of Workpiece: 227.4 Millimeter --> 0.2274 Meter (Check conversion here)
Workpiece Removal Parameter: 10 --> No Conversion Required
Diameter of Grinding Tool Wheel: 500 Millimeter --> 0.5 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_i = V_f*(1+(Λ_t*d_w/(Λ_w*d_t))) --> 0.2036043*(1+(2.4*0.2274/(10*0.5)))

Evaluating ... ...

V_i = 0.2258281165536

STEP 3: Convert Result to Output's Unit

0.2258281165536 Meter per Second -->225.8281165536 Millimeter per Second (Check conversion here)

FINAL ANSWER

225.8281165536 ≈ 225.8281 Millimeter per Second <-- Machine Infeed speed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Material Removed » Removal Parameters » Machine infeed speed given workpiece and wheel removal parameter

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< 19 Removal Parameters Calculators

Machine infeed speed given workpiece and wheel removal parameter

Go Machine Infeed speed = Feed Speed*(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel)))

Workpiece removal parameter given feed and machine infeed speed

Go Workpiece Removal Parameter = Wheel Removal Parameter*Diameter of Workpiece/(((Machine Infeed speed/Feed Speed)-1)*Diameter of Grinding Tool Wheel)

Feed speed given workpiece and wheel removal parameter

Go Feed Speed = Machine Infeed speed/(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel)))

Wheel removal parameter given feed and machine infeed speed

Go Wheel Removal Parameter = Workpiece Removal Parameter*Diameter of Grinding Tool Wheel*((Machine Infeed speed/Feed Speed)-1)/Diameter of Workpiece

Width of cut given Metal removal rate

Go Width of Grinding Path = Metal Removal Rate/(Feed Speed*pi*Diameter of Workpiece)

Feed speed given Metal removal rate

Go Feed Speed = Metal Removal Rate/(pi*Diameter of Workpiece*Width of Grinding Path)

Metal removal rate given Diameter of workpiece

Go Metal Removal Rate = pi*Diameter of Workpiece*Width of Grinding Path*Feed Speed

Threshold thrust force given workpiece removal parameter

Go Threshold Thrust Force = Thrust Force-(Material Removal Rate/Workpiece Removal Parameter)

Metal removal rate given workpiece removal parameter

Go Material Removal Rate = (Thrust Force-Threshold Thrust Force)*Workpiece Removal Parameter

Workpiece removal parameter given metal removal rate

Go Workpiece Removal Parameter = Material Removal Rate/(Thrust Force-Threshold Thrust Force)

Thrust force given workpiece removal parameter

Go Thrust Force = (Material Removal Rate/Workpiece Removal Parameter)+Threshold Thrust Force

Wheel removal rate given Wheel removal parameter

Go Wheel Removal Rate = Wheel Removal Parameter*(Thrust Force-Threshold Thrust Force)

Wheel removal parameter given wheel removal rate

Go Wheel Removal Parameter = Wheel Removal Rate/(Thrust Force-Threshold Thrust Force)

Time taken for spark-out operation

Go Time Taken for Spark-Out Operation = Number of Workpiece Revolution/Rotational Frequency of Workpiece

Relative contact area of grains given Total Energy flowing into workpiece

Go Relative Contact Area of Grain = ((Proportion of Total Energy Flowing into Workpiece/100)-0.6)/0.05

Workpiece removal parameter given Grinding ratio

Go Workpiece Removal Parameter = Grinding Ratio*Wheel Removal Parameter

Wheel removal parameter given Grinding ratio

Go Wheel Removal Parameter = Workpiece Removal Parameter/Grinding Ratio

Grinding ratio

Go Grinding Ratio = Workpiece Removal Parameter/Wheel Removal Parameter

Grain size given grain Diameter

Go Grain size (in mm) = 0.0254/Grain Diameter of the Grinding Wheel

Machine infeed speed given workpiece and wheel removal parameter Formula

Machine Infeed speed = Feed Speed*(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel)))
V_i = V_f*(1+(Λ_t*d_w/(Λ_w*d_t)))

What is a grinding wheel used for?

A grinding wheel is a wheel composed of an abrasive compound and used for various grinding (abrasive cutting) and abrasive machining operations. Such wheels are used in grinding machines.

How to Calculate Machine infeed speed given workpiece and wheel removal parameter?

Machine infeed speed given workpiece and wheel removal parameter calculator uses Machine Infeed speed = Feed Speed*(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel))) to calculate the Machine Infeed speed, The Machine infeed speed given workpiece and wheel removal parameter is the speed at which the wheel is moving towards the workpiece. Machine Infeed speed is denoted by V_i symbol.

How to calculate Machine infeed speed given workpiece and wheel removal parameter using this online calculator? To use this online calculator for Machine infeed speed given workpiece and wheel removal parameter, enter Feed Speed (V_f), Wheel Removal Parameter (Λ_t), Diameter of Workpiece (d_w), Workpiece Removal Parameter (Λ_w) & Diameter of Grinding Tool Wheel (d_t) and hit the calculate button. Here is how the Machine infeed speed given workpiece and wheel removal parameter calculation can be explained with given input values -> 1.2E+6 = 0.2036043*(1+(2.4*0.2274/(10*0.5))).

FAQ

What is Machine infeed speed given workpiece and wheel removal parameter?

The Machine infeed speed given workpiece and wheel removal parameter is the speed at which the wheel is moving towards the workpiece and is represented as V_i = V_f*(1+(Λ_t*d_w/(Λ_w*d_t))) or Machine Infeed speed = Feed Speed*(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel))). Feed Speed is the distance a cutting tool travels during one spindle revolution, The wheel removal parameter is the ratio of the volume of wheel removed per unit time per unit thrust force, The Diameter of Workpiece is defined as the diameter of the workpiece which is undergoing grinding, Workpiece removal parameter is the ratio of the volume of workpiece removed per unit time per unit thrust force in grinding process & The Diameter of Grinding Tool Wheel is the diameter of the wheel, which is used for the grinding process.

How to calculate Machine infeed speed given workpiece and wheel removal parameter?

The Machine infeed speed given workpiece and wheel removal parameter is the speed at which the wheel is moving towards the workpiece is calculated using Machine Infeed speed = Feed Speed*(1+(Wheel Removal Parameter*Diameter of Workpiece/(Workpiece Removal Parameter*Diameter of Grinding Tool Wheel))). To calculate Machine infeed speed given workpiece and wheel removal parameter, you need Feed Speed (V_f), Wheel Removal Parameter (Λ_t), Diameter of Workpiece (d_w), Workpiece Removal Parameter (Λ_w) & Diameter of Grinding Tool Wheel (d_t). With our tool, you need to enter the respective value for Feed Speed, Wheel Removal Parameter, Diameter of Workpiece, Workpiece Removal Parameter & Diameter of Grinding Tool Wheel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search