Maximum Pressure on Horizontal Plate Calculator

✖Maximum Compressive Load on Remote Bracket is the highest amount of compressive force that a material or structure can withstand before it deforms or breaks.ⓘ Maximum Compressive Load on Remote Bracket [P_Load]			+10% -10%
✖Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length.ⓘ Effective Width of Horizontal Plate [a]			+10% -10%
✖Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.ⓘ Length of Horizontal Plate [L_Horizontal]			+10% -10%

✖The Maximum Pressure on Horizontal Plate formula is defined as the highest pressure that a system, equipment or material can withstand without experiencing failure or damage.ⓘ Maximum Pressure on Horizontal Plate [f_horizontal]

⎘ Copy

👎

Formula

✖

Maximum Pressure on Horizontal Plate

Formula

`"f"_{"horizontal"} = "P"_{"Load"}/("a"*"L"_{"Horizontal"})`

Example

`"2.687973N/mm²"="34820N"/("102mm"*"127mm")`

Calculator

LaTeX

Reset

👍

Download Lug or Bracket Support Formulas PDF PDF Image

Maximum Pressure on Horizontal Plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate)
f_horizontal = P_Load/(a*L_Horizontal)
This formula uses 4 Variables

Variables Used

Maximum Pressure on Horizontal Plate - (Measured in Pascal) - The Maximum Pressure on Horizontal Plate formula is defined as the highest pressure that a system, equipment or material can withstand without experiencing failure or damage.
Maximum Compressive Load on Remote Bracket - (Measured in Newton) - Maximum Compressive Load on Remote Bracket is the highest amount of compressive force that a material or structure can withstand before it deforms or breaks.
Effective Width of Horizontal Plate - (Measured in Meter) - Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length.
Length of Horizontal Plate - (Measured in Meter) - Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.

STEP 1: Convert Input(s) to Base Unit

Maximum Compressive Load on Remote Bracket: 34820 Newton --> 34820 Newton No Conversion Required
Effective Width of Horizontal Plate: 102 Millimeter --> 0.102 Meter (Check conversion here)
Length of Horizontal Plate: 127 Millimeter --> 0.127 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_horizontal = P_Load/(a*L_Horizontal) --> 34820/(0.102*0.127)

Evaluating ... ...

f_horizontal = 2687972.82692605

STEP 3: Convert Result to Output's Unit

2687972.82692605 Pascal -->2.68797282692605 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

2.68797282692605 ≈ 2.687973 Newton per Square Millimeter <-- Maximum Pressure on Horizontal Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Vessel Supports » Lug or Bracket Support » Maximum Pressure on Horizontal Plate

Credits

Created by Heet

Thadomal Shahani Engineering College (Tsec), Mumbai

Heet has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 14 Lug or Bracket Support Calculators

Maximum Combined Stress on Long Column

Go Maximum Combined Stress = ((Axial Compressive Load on Column/(Number of Columns*Cross Sectional Area of Column))*(1+(1/7500)*(Column Effective Length/Radius of Gyration of Column)^(2))+((Axial Compressive Load on Column*Eccentricity for Vessel Support)/(Number of Columns*Section Modulus of Vessel Support)))

Maximum Compressive Load acting on Bracket

Go Maximum Compressive Load on Remote Bracket = ((4*(Total Wind Force acting on Vessel))*(Height of Vessel above Foundation-Clearance between Vessel Bottom and Foundation))/(Number of Brackets*Diameter of Anchor Bolt Circle)+(Total Weight of Vessel/Number of Brackets)

Thickness of Horizontal Plate Fixed at Edges

Go Thickness of Horizontal Plate = ((0.7)*(Maximum Pressure on Horizontal Plate)*((Length of Horizontal Plate)^(2)/(Maximum Stress in Horizontal Plate fixed at Edges))*((Effective Width of Horizontal Plate)^(4)/((Length of Horizontal Plate)^(4)+(Effective Width of Horizontal Plate)^(4))))^(0.5)

Maximum Combined Stress on Short Column

Go Maximum Combined Stress = ((Axial Compressive Load on Column/(Number of Columns*Cross Sectional Area of Column))+((Axial Compressive Load on Column*Eccentricity for Vessel Support)/(Number of Columns*Section Modulus of Vessel Support)))

Minimum Thickness of Base Plate

Go Minimum Thickness of Base Plate = ((3*Pressure Intensity on Under Side of Base Plate/Permissible Bending Stress in Base Plate Material)*((Greater Projection of Plate beyond Column)^(2)-((Lesser Projection of Plate beyond Column)^(2)/4)))^(0.5)

Thickness of Gusset Plate

Go Thickness of Gusset Plate = (Bending Moment of Gusset Plate/((Maximum Compressive Stress*(Height of Gusset Plate^(2)))/6))*(1/cos(Gusset Plate Edge Angle))

Bending Stress in Column due to Wind Load

Go Bending Stress in Column due to Wind Load = ((Wind Load acting on Vessel/Number of Columns)*(Length of Columns/2))/Section Modulus of Vessel Support

Maximum Compressive Stress Parallel to Edge of Gusset Plate

Go Maximum Compressive Stress = (Bending Moment of Gusset Plate/Section Modulus of Vessel Support)*(1/cos(Gusset Plate Edge Angle))

Pressure Intensity on under side of Base Plate

Go Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate)

Maximum Pressure on Horizontal Plate

Go Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate)

Axial Bending Stress in Vessel Wall for Unit Width

Go Axial Bending Stress induced in Vessel Wall = (6*Axial Bending Moment*Effective Width of Horizontal Plate)/Vessel Shell Thickness^(2)

Minimum Area by Base Plate

Go Minimum Area provided by Base Plate = Axial Compressive Load on Column/Permissible Bearing Strength of Concrete

Maximum Compressive Stress

Go Maximum Compressive Stress = Stress due to Bending Moment+Compressive Stress due to Force

Maximum Compressive Load on Remote Bracket due to Dead Load

Go Maximum Compressive Load on Remote Bracket = Total Weight of Vessel/Number of Brackets

Maximum Pressure on Horizontal Plate Formula

Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate)
f_horizontal = P_Load/(a*L_Horizontal)

What is Design Pressure?

Design pressure refers to the maximum allowable pressure that a pressure vessel, piping system, or other equipment component is designed to withstand. It is a critical parameter in the design and engineering of these systems, as it ensures that the system can safely handle the expected operating pressure and conditions without failure or leakage.

How to Calculate Maximum Pressure on Horizontal Plate?

Maximum Pressure on Horizontal Plate calculator uses Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate) to calculate the Maximum Pressure on Horizontal Plate, The Maximum Pressure on Horizontal Plate formula is defined as the highest pressure that a system, equipment or material can withstand without experiencing failure or damage. Maximum Pressure on Horizontal Plate is denoted by f_horizontal symbol.

How to calculate Maximum Pressure on Horizontal Plate using this online calculator? To use this online calculator for Maximum Pressure on Horizontal Plate, enter Maximum Compressive Load on Remote Bracket (P_Load), Effective Width of Horizontal Plate (a) & Length of Horizontal Plate (L_Horizontal) and hit the calculate button. Here is how the Maximum Pressure on Horizontal Plate calculation can be explained with given input values -> 2.7E-6 = 34820/(0.102*0.127).

FAQ

What is Maximum Pressure on Horizontal Plate?

The Maximum Pressure on Horizontal Plate formula is defined as the highest pressure that a system, equipment or material can withstand without experiencing failure or damage and is represented as f_horizontal = P_Load/(a*L_Horizontal) or Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate). Maximum Compressive Load on Remote Bracket is the highest amount of compressive force that a material or structure can withstand before it deforms or breaks, Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length & Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.

How to calculate Maximum Pressure on Horizontal Plate?

The Maximum Pressure on Horizontal Plate formula is defined as the highest pressure that a system, equipment or material can withstand without experiencing failure or damage is calculated using Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate). To calculate Maximum Pressure on Horizontal Plate, you need Maximum Compressive Load on Remote Bracket (P_Load), Effective Width of Horizontal Plate (a) & Length of Horizontal Plate (L_Horizontal). With our tool, you need to enter the respective value for Maximum Compressive Load on Remote Bracket, Effective Width of Horizontal Plate & Length of Horizontal Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search