Mean diameter of conical spring Solution

STEP 0: Pre-Calculation Summary
Formula Used
Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal)
Dm = Di+((3/2)*w)
This formula uses 3 Variables
Variables Used
Mean Diameter of Conical Spring - (Measured in Meter) - Mean diameter of conical spring a straight line passing from side to side through the centre of a spring.
Inside Diameter - (Measured in Meter) - Inside diameter is the diameter of the inside surface.
Nominal Packing Cross-section of Bush Seal - (Measured in Meter) - The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.
STEP 1: Convert Input(s) to Base Unit
Inside Diameter: 5.4 Millimeter --> 0.0054 Meter (Check conversion here)
Nominal Packing Cross-section of Bush Seal: 8.5 Millimeter --> 0.0085 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Dm = Di+((3/2)*w) --> 0.0054+((3/2)*0.0085)
Evaluating ... ...
Dm = 0.01815
STEP 3: Convert Result to Output's Unit
0.01815 Meter -->18.15 Millimeter (Check conversion here)
FINAL ANSWER
18.15 Millimeter <-- Mean Diameter of Conical Spring
(Calculation completed in 00.004 seconds)

Credits

Created by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has created this Calculator and 100+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

12 Single spring installations Calculators

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring
Go Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2))
Outer Diameter of spring wire given Actual mean diameter of Conical spring
Go Outer diameter of spring wire = Actual mean diameter of spring-(1/2)*(Nominal Packing Cross-section of Bush Seal+Diameter of spring wire)
Nominal packing cross section given Actual mean diameter of Conical spring
Go Nominal Packing Cross-section of Bush Seal = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Diameter of spring wire/2))
Actual mean diameter of conical spring
Go Actual mean diameter of spring = Outer diameter of spring wire-(1/2)*(Nominal Packing Cross-section of Bush Seal+Diameter of spring wire)
Actual Mean Diameter of Conical Spring given Deflection of Spring
Go Actual mean diameter of spring = ((Deflection of Conical Spring*Diameter of spring wire)/0.0123)^1/2
Inside diameter of member given Mean diameter of Conical spring
Go Inside Diameter = Mean Diameter of Conical Spring-((3/2)*Nominal Packing Cross-section of Bush Seal)
Mean diameter of conical spring
Go Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal)
Nominal packing cross section given Mean diameter of Conical spring
Go Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3
Deflection of conical spring
Go Deflection of Conical Spring = .0123*((Actual mean diameter of spring)^2)/Diameter of spring wire
Actual Diameter of Spring Wire given Deflection of Spring
Go Diameter of spring wire = .0123*(Actual mean diameter of spring)^2/Deflection of Conical Spring
Diameter of wire for spring given Mean diameter of Conical spring
Go Diameter of spring wire = ((pi*(Mean Diameter of Conical Spring)^2)/139300)^1/3
Mean diameter of conical spring given Diameter of spring wire
Go Mean Diameter of Conical Spring = (((Diameter of spring wire)^3*139300)/pi)^1/2

Mean diameter of conical spring Formula

Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal)
Dm = Di+((3/2)*w)

What is Mean diameter of conical spring?

Mean diameter is a straight line passing from side to side through the centre of a body or figure, especially a circle or sphere.

How to Calculate Mean diameter of conical spring?

Mean diameter of conical spring calculator uses Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal) to calculate the Mean Diameter of Conical Spring, The Mean diameter of conical spring formula is defined as the sum of the inside diameter of the spring and the nominal diameter of the packing cross section. Mean Diameter of Conical Spring is denoted by Dm symbol.

How to calculate Mean diameter of conical spring using this online calculator? To use this online calculator for Mean diameter of conical spring, enter Inside Diameter (Di) & Nominal Packing Cross-section of Bush Seal (w) and hit the calculate button. Here is how the Mean diameter of conical spring calculation can be explained with given input values -> 18150 = 0.0054+((3/2)*0.0085).

FAQ

What is Mean diameter of conical spring?
The Mean diameter of conical spring formula is defined as the sum of the inside diameter of the spring and the nominal diameter of the packing cross section and is represented as Dm = Di+((3/2)*w) or Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal). Inside diameter is the diameter of the inside surface & The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.
How to calculate Mean diameter of conical spring?
The Mean diameter of conical spring formula is defined as the sum of the inside diameter of the spring and the nominal diameter of the packing cross section is calculated using Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal). To calculate Mean diameter of conical spring, you need Inside Diameter (Di) & Nominal Packing Cross-section of Bush Seal (w). With our tool, you need to enter the respective value for Inside Diameter & Nominal Packing Cross-section of Bush Seal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Mean Diameter of Conical Spring?
In this formula, Mean Diameter of Conical Spring uses Inside Diameter & Nominal Packing Cross-section of Bush Seal. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Mean Diameter of Conical Spring = (((Diameter of spring wire)^3*139300)/pi)^1/2
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!