Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load Solution

STEP 0: Pre-Calculation Summary
Formula Used
Modulus of elasticity of column = Eccentric load on column/(Moment of Inertia*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2))
εcolumn = P/(I*(((arcsec((acrippling/eload)+1))/lcolumn)^2))
This formula uses 2 Functions, 6 Variables
Functions Used
sec - Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine., sec(Angle)
arcsec - Inverse trigonometric secant – Unary function., arcsec(x)
Variables Used
Modulus of elasticity of column - (Measured in Pascal) - Modulus of elasticity of column is a quantity that measures an object or substance's resistance to being deformed elastically when stress is applied to it.
Eccentric load on column - (Measured in Newton) - Eccentric load on column is the load that causes direct stress as well as bending stress.
Moment of Inertia - (Measured in Kilogram Square Meter) - Moment of Inertia is the measure of the resistance of a body to angular acceleration about a given axis.
Deflection of Free End - (Measured in Meter) - Deflection of Free End is the deflection caused due to crippling load at the free end.
Eccentricity of Load - (Measured in Meter) - Eccentricity of Load is the distance from the center of gravity of the column section to the center of gravity of the applied load.
Column Length - (Measured in Meter) - Column Length is the distance between two points where a column gets its fixity of support so its movement is restrained in all directions.
STEP 1: Convert Input(s) to Base Unit
Eccentric load on column: 40 Newton --> 40 Newton No Conversion Required
Moment of Inertia: 0.000168 Kilogram Square Meter --> 0.000168 Kilogram Square Meter No Conversion Required
Deflection of Free End: 14 Millimeter --> 0.014 Meter (Check conversion here)
Eccentricity of Load: 2.5 Millimeter --> 0.0025 Meter (Check conversion here)
Column Length: 5000 Millimeter --> 5 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
εcolumn = P/(I*(((arcsec((acrippling/eload)+1))/lcolumn)^2)) --> 40/(0.000168*(((arcsec((0.014/0.0025)+1))/5)^2))
Evaluating ... ...
εcolumn = 2957415.91903013
STEP 3: Convert Result to Output's Unit
2957415.91903013 Pascal -->2.95741591903013 Megapascal (Check conversion here)
FINAL ANSWER
2.95741591903013 2.957416 Megapascal <-- Modulus of elasticity of column
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

16 Columns With Eccentric Load Calculators

Cross Sectional Area of Column given Maximum Stress for Column with Eccentric Load
Go Column Cross Sectional Area = (Eccentric load on column)/(Maximum Stress at Crack Tip-(((Eccentric load on column*Eccentricity of Load*sec(Effective Column Length*sqrt(Eccentric load on column/(Modulus of elasticity of column*Moment of Inertia))))/2)/Section Modulus for Column))
Effective Length of Column given Maximum Stress for Column with Eccentric Load
Go Effective Column Length = asech(((Maximum Stress at Crack Tip-(Eccentric load on column/Column Cross Sectional Area))*Section Modulus for Column)/(Eccentric load on column*Eccentricity))/(sqrt(Eccentric load on column/(Modulus of elasticity of column*Moment of Inertia))/2)
Eccentricity given Maximum Stress for Column with Eccentric Load
Go Eccentricity = ((Maximum Stress at Crack Tip-(Eccentric load on column/Column Cross Sectional Area))*Section Modulus for Column)/((Eccentric load on column*sec(Effective Column Length*sqrt(Eccentric load on column/(Modulus of elasticity of column*Moment of Inertia))))/2)
Section Modulus given Maximum Stress for Column with Eccentric Load
Go Section Modulus for Column = ((Eccentric load on column*Eccentricity*sec(Effective Column Length*sqrt(Eccentric load on column/(Modulus of elasticity of column*Moment of Inertia))))/2)/(Maximum Stress at Crack Tip-(Eccentric load on column/Column Cross Sectional Area))
Maximum Stress for Column with Eccentric Load
Go Maximum Stress at Crack Tip = (Eccentric load on column/Column Cross Sectional Area)+(((Eccentric load on column*Eccentricity*sec(Effective Column Length*sqrt(Eccentric load on column/(Modulus of elasticity of column*Moment of Inertia))))/2)/Section Modulus for Column)
Modulus of Elasticity given Maximum Stress for Column with Eccentric Load
Go Modulus of elasticity of column = ((asech(((Maximum Stress at Crack Tip-(Eccentric load on column/Column Cross Sectional Area))*Section Modulus for Column)/(Eccentric load on column*Eccentricity))/(Effective Column Length))^2)/(Eccentric load on column/(Moment of Inertia))
Moment of Inertia given Maximum Stress for Column with Eccentric Load
Go Moment of Inertia = ((asech(((Maximum Stress at Crack Tip-(Eccentric load on column/Column Cross Sectional Area))*Section Modulus for Column)/(Eccentric load on column*Eccentricity))/(Effective Column Length))^2)/(Eccentric load on column/(Modulus of elasticity of column))
Eccentricity given Deflection at Section of Column with Eccentric load
Go Eccentricity = (Deflection of Column/(1-cos(Distance b/w fixed end and deflection point*sqrt(Eccentric load on column/(Modulus of elasticity of column*Moment of Inertia)))))-Deflection of Free End
Modulus of Elasticity given Deflection at Section of Column with Eccentric Load
Go Modulus of elasticity of column = (Eccentric load on column/(Moment of Inertia*(((acos(1-(Deflection of Column/(Deflection of Free End+Eccentricity of Load))))/Distance b/w fixed end and deflection point)^2)))
Moment of Inertia given Deflection at Section of Column with Eccentric Load
Go Moment of Inertia = (Eccentric load on column/(Modulus of elasticity of column*(((acos(1-(Deflection of Column/(Deflection of Free End+Eccentricity of Load))))/Distance b/w fixed end and deflection point)^2)))
Eccentric Load given Deflection at Section of Column with Eccentric Load
Go Eccentric load on column = (((acos(1-(Deflection of Column/(Deflection of Free End+Eccentricity of Load))))/Distance b/w fixed end and deflection point)^2)*(Modulus of elasticity of column*Moment of Inertia)
Eccentricity given Deflection at Free End of Column with Eccentric load
Go Eccentricity = Deflection of Free End/(sec(Column Length*sqrt(Eccentric load at column/(Modulus of elasticity of column*Moment of Inertia)))-1)
Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load
Go Modulus of elasticity of column = Eccentric load on column/(Moment of Inertia*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2))
Moment of Inertia given Deflection at Free End of Column with Eccentric Load
Go Moment of Inertia = Eccentric load on column/(Modulus of elasticity of column*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2))
Moment at Section of Column with Eccentric Load
Go Moment of force = Eccentric load on column*(Deflection of Free End+Eccentricity of Load-Deflection of Column)
Eccentricity given Moment at Section of Column with Eccentric Load
Go Eccentricity = (Moment of force/Eccentric load on column)-Deflection of Free End+Deflection of Column

Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load Formula

Modulus of elasticity of column = Eccentric load on column/(Moment of Inertia*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2))
εcolumn = P/(I*(((arcsec((acrippling/eload)+1))/lcolumn)^2))

Which is example of eccentric loading?

Examples of eccentric loading activities include performing a calf raise off the ledge of a stair, an exercise that has been shown to decrease the risk of Achilles tendon injuries. Another example is the nordic curl exercise, which has been shown to help reduce the risk of hamstring strains.

How to Calculate Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load?

Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load calculator uses Modulus of elasticity of column = Eccentric load on column/(Moment of Inertia*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2)) to calculate the Modulus of elasticity of column, The Modulus of elasticity given deflection at free end of column with eccentric load formula is defined as a quantity that measures an object or substance's resistance to being deformed elastically (i.e., non-permanently) when stress is applied to it. Modulus of elasticity of column is denoted by εcolumn symbol.

How to calculate Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load using this online calculator? To use this online calculator for Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load, enter Eccentric load on column (P), Moment of Inertia (I), Deflection of Free End (acrippling), Eccentricity of Load (eload) & Column Length (lcolumn) and hit the calculate button. Here is how the Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load calculation can be explained with given input values -> 3E-6 = 40/(0.000168*(((arcsec((0.014/0.0025)+1))/5)^2)).

FAQ

What is Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load?
The Modulus of elasticity given deflection at free end of column with eccentric load formula is defined as a quantity that measures an object or substance's resistance to being deformed elastically (i.e., non-permanently) when stress is applied to it and is represented as εcolumn = P/(I*(((arcsec((acrippling/eload)+1))/lcolumn)^2)) or Modulus of elasticity of column = Eccentric load on column/(Moment of Inertia*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2)). Eccentric load on column is the load that causes direct stress as well as bending stress, Moment of Inertia is the measure of the resistance of a body to angular acceleration about a given axis, Deflection of Free End is the deflection caused due to crippling load at the free end, Eccentricity of Load is the distance from the center of gravity of the column section to the center of gravity of the applied load & Column Length is the distance between two points where a column gets its fixity of support so its movement is restrained in all directions.
How to calculate Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load?
The Modulus of elasticity given deflection at free end of column with eccentric load formula is defined as a quantity that measures an object or substance's resistance to being deformed elastically (i.e., non-permanently) when stress is applied to it is calculated using Modulus of elasticity of column = Eccentric load on column/(Moment of Inertia*(((arcsec((Deflection of Free End/Eccentricity of Load)+1))/Column Length)^2)). To calculate Modulus of Elasticity given Deflection at Free End of Column with Eccentric Load, you need Eccentric load on column (P), Moment of Inertia (I), Deflection of Free End (acrippling), Eccentricity of Load (eload) & Column Length (lcolumn). With our tool, you need to enter the respective value for Eccentric load on column, Moment of Inertia, Deflection of Free End, Eccentricity of Load & Column Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Modulus of elasticity of column?
In this formula, Modulus of elasticity of column uses Eccentric load on column, Moment of Inertia, Deflection of Free End, Eccentricity of Load & Column Length. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Modulus of elasticity of column = (Eccentric load on column/(Moment of Inertia*(((acos(1-(Deflection of Column/(Deflection of Free End+Eccentricity of Load))))/Distance b/w fixed end and deflection point)^2)))
  • Modulus of elasticity of column = ((asech(((Maximum Stress at Crack Tip-(Eccentric load on column/Column Cross Sectional Area))*Section Modulus for Column)/(Eccentric load on column*Eccentricity))/(Effective Column Length))^2)/(Eccentric load on column/(Moment of Inertia))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!