Nominal Tensile Stress in Rectangular Plate with Transverse Hole Calculator

✖Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate.ⓘ Load on Flat Plate [P]			+10% -10%
✖Width of Plate is the width or the lateral dimension of the plate or a metal sheet under consideration.ⓘ Width of Plate [w]			+10% -10%
✖Diameter of Transverse hole in Plate is the length of a straight line passing from side to side through the center of a hole(an opening through something), especially a circle.ⓘ Diameter of Transverse Hole in Plate [d_h]			+10% -10%
✖Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.ⓘ Thickness of Plate [t]			+10% -10%

✖Nominal Stress is the value of the stress at the minimum cross-section.ⓘ Nominal Tensile Stress in Rectangular Plate with Transverse Hole [σ_o]

⎘ Copy

👎

Formula

✖

Nominal Tensile Stress in Rectangular Plate with Transverse Hole

Formula

`"σ"_{"o"} = "P"/(("w"-"d"_{"h"})*"t")`

Example

`"41.66667N/mm²"="8750N"/(("70mm"-"49mm")*"10mm")`

Calculator

LaTeX

Reset

👍

Download Mechanical Formula PDF

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Solution

STEP 0: Pre-Calculation Summary

Formula Used

Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)
σ_o = P/((w-d_h)*t)
This formula uses 5 Variables

Variables Used

Nominal Stress - (Measured in Pascal) - Nominal Stress is the value of the stress at the minimum cross-section.
Load on Flat Plate - (Measured in Newton) - Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate.
Width of Plate - (Measured in Meter) - Width of Plate is the width or the lateral dimension of the plate or a metal sheet under consideration.
Diameter of Transverse Hole in Plate - (Measured in Meter) - Diameter of Transverse hole in Plate is the length of a straight line passing from side to side through the center of a hole(an opening through something), especially a circle.
Thickness of Plate - (Measured in Meter) - Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

STEP 1: Convert Input(s) to Base Unit

Load on Flat Plate: 8750 Newton --> 8750 Newton No Conversion Required
Width of Plate: 70 Millimeter --> 0.07 Meter (Check conversion here)
Diameter of Transverse Hole in Plate: 49 Millimeter --> 0.049 Meter (Check conversion here)
Thickness of Plate: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_o = P/((w-d_h)*t) --> 8750/((0.07-0.049)*0.01)

Evaluating ... ...

σ_o = 41666666.6666667

STEP 3: Convert Result to Output's Unit

41666666.6666667 Pascal -->41.6666666666667 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

41.6666666666667 ≈ 41.66667 Newton per Square Millimeter <-- Nominal Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Rectangular Plate against Fluctuating Loads » Nominal Tensile Stress in Rectangular Plate with Transverse Hole

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< 6 Rectangular Plate against Fluctuating Loads Calculators

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress

Go Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress)

Nominal Tensile Stress in Rectangular Plate with Transverse Hole

Go Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)

Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress

Go Diameter of Transverse Hole in Plate = Width of Plate-Load on Flat Plate/(Thickness of Plate*Nominal Stress)

Width of Rectangular Plate with Transverse Hole given Nominal Stress

Go Width of Plate = Load on Flat Plate/(Thickness of Plate*Nominal Stress)+Diameter of Transverse Hole in Plate

Load on Rectangular Plate with Transverse Hole given Nominal Stress

Go Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate

Highest Value of Actual Stress near Discontinuity

Go Highest Value of Actual Stress near Discontinuity = Fatigue Stress Concentration Factor*Nominal Stress

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Formula

Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)
σ_o = P/((w-d_h)*t)

What is stress concentration?

Stress concentration is defined as the localization of high stresses due to the irregularities present in the component and abrupt changes in the cross-section. In order to consider the effect of stress concentration and find out localized stresses, a factor called the stress concentration factor is used.

How to Calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

Nominal Tensile Stress in Rectangular Plate with Transverse Hole calculator uses Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate) to calculate the Nominal Stress, The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole. Nominal Stress is denoted by σ_o symbol.

How to calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole using this online calculator? To use this online calculator for Nominal Tensile Stress in Rectangular Plate with Transverse Hole, enter Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t) and hit the calculate button. Here is how the Nominal Tensile Stress in Rectangular Plate with Transverse Hole calculation can be explained with given input values -> 4.2E-5 = 8750/((0.07-0.049)*0.01).

FAQ

What is Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole and is represented as σ_o = P/((w-d_h)*t) or Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate). Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate, Width of Plate is the width or the lateral dimension of the plate or a metal sheet under consideration, Diameter of Transverse hole in Plate is the length of a straight line passing from side to side through the center of a hole(an opening through something), especially a circle & Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

How to calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole is calculated using Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate). To calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole, you need Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t). With our tool, you need to enter the respective value for Load on Flat Plate, Width of Plate, Diameter of Transverse Hole in Plate & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search