Offered Load Solution

STEP 0: Pre-Calculation Summary
Formula Used
Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60
A = (Qi*Tavg)/60
This formula uses 3 Variables
Variables Used
Offered Load - Offered load refers to the amount of data or traffic that is generated by users or devices within a wireless network.
Maximum Calls Per Hour Per Cell - Maximum Calls Per Hour Per Cell refers to the maximum number of simultaneous phone calls that can be supported by a single cell within a wireless network during a one-hour time frame.
Average Calling Time - (Measured in Second) - The average calling time in wireless communication can vary widely based on individual preferences, technology used, and specific circumstances.
STEP 1: Convert Input(s) to Base Unit
Maximum Calls Per Hour Per Cell: 18 --> No Conversion Required
Average Calling Time: 200 Second --> 200 Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
A = (Qi*Tavg)/60 --> (18*200)/60
Evaluating ... ...
A = 60
STEP 3: Convert Result to Output's Unit
60 --> No Conversion Required
FINAL ANSWER
60 <-- Offered Load
(Calculation completed in 00.004 seconds)

Credits

Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

16 Cellular Concepts Calculators

Distance between Co-Channel Cells
Go Frequency Reuse Distance = (sqrt(3*Frequency Reuse Pattern))*Radius of Cell
Bandwidth of M-Ary PSK
Go M-Ary PSK Bandwidth = (2*Transmitting Frequency)/Number of Bits per Symbol
Maximum Calls per Hour per Cell
Go Maximum Calls Per Hour Per Cell = (Offered Load*60)/Average Calling Time
Average Calling Time
Go Average Calling Time = (Offered Load*60)/Maximum Calls Per Hour Per Cell
Offered Load
Go Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60
Frequency Reuse Distance
Go Frequency Reuse Distance = Co Channel Reuse Ratio*Radius of Cell
Co-Channel Interference
Go Co Channel Reuse Ratio = Frequency Reuse Distance/Radius of Cell
Cell Radius
Go Radius of Cell = Frequency Reuse Distance/Co Channel Reuse Ratio
Bandwidth Efficiency
Go Bandwidth Efficiency = Data Rate/Bandwidth
Hamming Distance
Go Hamming Distance = 2*Capability of Error Correction Bits+1
New Traffic Load
Go New Traffic Load = 4*Old Traffic Load
Traffic Load
Go Old Traffic Load = New Traffic Load/4
New Cell Radius
Go New Cell Radius = Old Cell Radius/2
Old Cell Radius
Go Old Cell Radius = New Cell Radius*2
New Cell Area
Go New Cell Area = Old Cell Area/4
Old Cell Area
Go Old Cell Area = New Cell Area*4

Offered Load Formula

Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60
A = (Qi*Tavg)/60

What do you mean by Network and Switching Subsystem?

It controls handoffs between cells in different BSSs, authenticates users, validates and maintains their accounts. It is mainly supported by four databases like Home Location Register., Visitor Location Register, Authentication Center, and Equipment Identity Register.

How to Calculate Offered Load?

Offered Load calculator uses Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60 to calculate the Offered Load, The Offered load is a measure of traffic in a queue. Offered load is expressed in Erlang units or call-seconds per hour, a dimensionless measure. Offered Load is denoted by A symbol.

How to calculate Offered Load using this online calculator? To use this online calculator for Offered Load, enter Maximum Calls Per Hour Per Cell (Qi) & Average Calling Time (Tavg) and hit the calculate button. Here is how the Offered Load calculation can be explained with given input values -> 60 = (18*200)/60.

FAQ

What is Offered Load?
The Offered load is a measure of traffic in a queue. Offered load is expressed in Erlang units or call-seconds per hour, a dimensionless measure and is represented as A = (Qi*Tavg)/60 or Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60. Maximum Calls Per Hour Per Cell refers to the maximum number of simultaneous phone calls that can be supported by a single cell within a wireless network during a one-hour time frame & The average calling time in wireless communication can vary widely based on individual preferences, technology used, and specific circumstances.
How to calculate Offered Load?
The Offered load is a measure of traffic in a queue. Offered load is expressed in Erlang units or call-seconds per hour, a dimensionless measure is calculated using Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60. To calculate Offered Load, you need Maximum Calls Per Hour Per Cell (Qi) & Average Calling Time (Tavg). With our tool, you need to enter the respective value for Maximum Calls Per Hour Per Cell & Average Calling Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!