Output Resistance with Feedback Current Amplifier Solution

STEP 0: Pre-Calculation Summary
Formula Used
Output Resistance of Current Amplifier = Amount of Feedback*Output Resistance
Rcof = Fam*Ro
This formula uses 3 Variables
Variables Used
Output Resistance of Current Amplifier - (Measured in Ohm) - Output Resistance of Current Amplifier with feedback is the resistance across the output terminals of a current amplifier.
Amount of Feedback - Amount of feedback is the transmission of evaluative or corrective information about an action, event, or process to the original or controlling source also: the information so transmitted.
Output Resistance - (Measured in Ohm) - Output resistance is the value of resistance of the network.
STEP 1: Convert Input(s) to Base Unit
Amount of Feedback: 3.6 --> No Conversion Required
Output Resistance: 2.33 Kilohm --> 2330 Ohm (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Rcof = Fam*Ro --> 3.6*2330
Evaluating ... ...
Rcof = 8388
STEP 3: Convert Result to Output's Unit
8388 Ohm -->8.388 Kilohm (Check conversion ​here)
FINAL ANSWER
8.388 Kilohm <-- Output Resistance of Current Amplifier
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Current Feedback Amplifiers Calculators

Output Resistance with Feedback Current Amplifier
​ LaTeX ​ Go Output Resistance of Current Amplifier = Amount of Feedback*Output Resistance
Input Resistance with Feedback Current Amplifier
​ LaTeX ​ Go Input Resistance with Feedback = Input Resistance/(1+Loop Gain)

Negative Feedback Amplifiers Calculators

Gain at Mid and High Frequencies
​ LaTeX ​ Go Gain Factor = Mid Band Gain/(1+(Complex Frequency Variable/Upper 3-dB Frequency))
Gain with Feedback of Feedback Amplifier
​ LaTeX ​ Go Gain with Feedback = (Open Loop Gain of an Operational Amplifier)/Amount of Feedback
Closed-Loop Gain as Function of Ideal Value
​ LaTeX ​ Go Closed-Loop Gain = (1/Feedback Factor)*(1/(1+(1/Loop Gain)))
Amount of Feedback Given Loop Gain
​ LaTeX ​ Go Amount of Feedback = 1+Loop Gain

Output Resistance with Feedback Current Amplifier Formula

​LaTeX ​Go
Output Resistance of Current Amplifier = Amount of Feedback*Output Resistance
Rcof = Fam*Ro

What is feedback in an amplifier?

In electronics, feedback is defined as the process of returning part of the signal output from a circuit or device back to the input of that circuit or device. Feedback systems are widely used in amplifier circuits, oscillators, process control systems, and many other areas.

How to Calculate Output Resistance with Feedback Current Amplifier?

Output Resistance with Feedback Current Amplifier calculator uses Output Resistance of Current Amplifier = Amount of Feedback*Output Resistance to calculate the Output Resistance of Current Amplifier, Output Resistance with Feedback Current Amplifier formula is defined as the measure of the opposition to current flow (impedance), both static (resistance) and dynamic (reactance), into the load network being connected that is internal to the electrical source. Output Resistance of Current Amplifier is denoted by Rcof symbol.

How to calculate Output Resistance with Feedback Current Amplifier using this online calculator? To use this online calculator for Output Resistance with Feedback Current Amplifier, enter Amount of Feedback (Fam) & Output Resistance (Ro) and hit the calculate button. Here is how the Output Resistance with Feedback Current Amplifier calculation can be explained with given input values -> 0.008388 = 3.6*2330.

FAQ

What is Output Resistance with Feedback Current Amplifier?
Output Resistance with Feedback Current Amplifier formula is defined as the measure of the opposition to current flow (impedance), both static (resistance) and dynamic (reactance), into the load network being connected that is internal to the electrical source and is represented as Rcof = Fam*Ro or Output Resistance of Current Amplifier = Amount of Feedback*Output Resistance. Amount of feedback is the transmission of evaluative or corrective information about an action, event, or process to the original or controlling source also: the information so transmitted & Output resistance is the value of resistance of the network.
How to calculate Output Resistance with Feedback Current Amplifier?
Output Resistance with Feedback Current Amplifier formula is defined as the measure of the opposition to current flow (impedance), both static (resistance) and dynamic (reactance), into the load network being connected that is internal to the electrical source is calculated using Output Resistance of Current Amplifier = Amount of Feedback*Output Resistance. To calculate Output Resistance with Feedback Current Amplifier, you need Amount of Feedback (Fam) & Output Resistance (Ro). With our tool, you need to enter the respective value for Amount of Feedback & Output Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!