Percent by Weight in Fuller Law Calculator

⤿

Pavement Materials

Design of Transition Curves and Setback Distances

Design of Superelevation

⤿

Specific Gravity and Water Absorption

✖Smallest particle denotes the tiniest or most minute component present within a given material or sample.ⓘ Smallest Particle [d]			+10% -10%
✖Largest particle refers to the most sizable or biggest constituent within a given material or sample.ⓘ Largest Particle [D]			+10% -10%
✖Coarseness of Aggregates characterizes the particle size distribution of aggregates, aiding in determining the level of fineness or coarseness within the aggregate mix.ⓘ Coarseness of Aggregates [n]			+10% -10%

✖Percentage of weight refers to the proportion or fraction of a specific weight in relation to the total weight, expressed as a percentage.ⓘ Percent by Weight in Fuller Law [P_weight]

⎘ Copy

👎

Formula

✖

Percent by Weight in Fuller Law

Formula

`"P"_{"weight"} = 100*("d"/"D")^"n"`

Example

`"78.25423"=100*("33mm"/"88mm")^"0.25"`

Calculator

LaTeX

Reset

👍

Download Pavement Materials Formulas PDF PDF Image

Percent by Weight in Fuller Law Solution

STEP 0: Pre-Calculation Summary

Formula Used

Percentage of Weight = 100*(Smallest Particle/Largest Particle)^Coarseness of Aggregates
P_weight = 100*(d/D)^n
This formula uses 4 Variables

Variables Used

Percentage of Weight - Percentage of weight refers to the proportion or fraction of a specific weight in relation to the total weight, expressed as a percentage.
Smallest Particle - (Measured in Meter) - Smallest particle denotes the tiniest or most minute component present within a given material or sample.
Largest Particle - (Measured in Meter) - Largest particle refers to the most sizable or biggest constituent within a given material or sample.
Coarseness of Aggregates - Coarseness of Aggregates characterizes the particle size distribution of aggregates, aiding in determining the level of fineness or coarseness within the aggregate mix.

STEP 1: Convert Input(s) to Base Unit

Smallest Particle: 33 Millimeter --> 0.033 Meter (Check conversion here)
Largest Particle: 88 Millimeter --> 0.088 Meter (Check conversion here)
Coarseness of Aggregates: 0.25 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_weight = 100*(d/D)^n --> 100*(0.033/0.088)^0.25

Evaluating ... ...

P_weight = 78.2542290036644

STEP 3: Convert Result to Output's Unit

78.2542290036644 --> No Conversion Required

FINAL ANSWER

78.2542290036644 ≈ 78.25423 <-- Percentage of Weight

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Transportation System » Pavement Materials » Fuller law » Percent by Weight in Fuller Law

Credits

Created by Rahul

Dayanada Sagar college of Engineering (DSCE), banglore

Rahul has created this Calculator and 50+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< 4 Fuller law Calculators

Coarseness of Aggregates in Fuller Law

Go Coarseness of Aggregates = (log10(Percentage of Weight/100))/(log10(Smallest Particle/Largest Particle))

Size of Smallest Particle in Fuller Law

Go Smallest Particle = Largest Particle*(Percentage of Weight/100)^(1/Coarseness of Aggregates)

Size of Largest Particle in Fuller Law

Go Largest Particle = Smallest Particle/(Percentage of Weight/100)^(1/Coarseness of Aggregates)

Percent by Weight in Fuller Law

Go Percentage of Weight = 100*(Smallest Particle/Largest Particle)^Coarseness of Aggregates

Percent by Weight in Fuller Law Formula

Percentage of Weight = 100*(Smallest Particle/Largest Particle)^Coarseness of Aggregates
P_weight = 100*(d/D)^n

Fuller Law

The Fuller Law defines the relationship between the volume of fine aggregates in concrete mixtures and their optimal packing density, guiding the ideal aggregate volume for maximum density and workability.

How to Calculate Percent by Weight in Fuller Law?

Percent by Weight in Fuller Law calculator uses Percentage of Weight = 100*(Smallest Particle/Largest Particle)^Coarseness of Aggregates to calculate the Percentage of Weight, The Percent by Weight in Fuller Law formula is calculated by taking the ratio of the smallest particle to the largest particle, raising it to the power of the coarseness of aggregates, and then multiplying by 100. Percentage of Weight is denoted by P_weight symbol.

How to calculate Percent by Weight in Fuller Law using this online calculator? To use this online calculator for Percent by Weight in Fuller Law, enter Smallest Particle (d), Largest Particle (D) & Coarseness of Aggregates (n) and hit the calculate button. Here is how the Percent by Weight in Fuller Law calculation can be explained with given input values -> 78.25423 = 100*(0.033/0.088)^0.25.

FAQ

What is Percent by Weight in Fuller Law?

The Percent by Weight in Fuller Law formula is calculated by taking the ratio of the smallest particle to the largest particle, raising it to the power of the coarseness of aggregates, and then multiplying by 100 and is represented as P_weight = 100*(d/D)^n or Percentage of Weight = 100*(Smallest Particle/Largest Particle)^Coarseness of Aggregates. Smallest particle denotes the tiniest or most minute component present within a given material or sample, Largest particle refers to the most sizable or biggest constituent within a given material or sample & Coarseness of Aggregates characterizes the particle size distribution of aggregates, aiding in determining the level of fineness or coarseness within the aggregate mix.

How to calculate Percent by Weight in Fuller Law?

The Percent by Weight in Fuller Law formula is calculated by taking the ratio of the smallest particle to the largest particle, raising it to the power of the coarseness of aggregates, and then multiplying by 100 is calculated using Percentage of Weight = 100*(Smallest Particle/Largest Particle)^Coarseness of Aggregates. To calculate Percent by Weight in Fuller Law, you need Smallest Particle (d), Largest Particle (D) & Coarseness of Aggregates (n). With our tool, you need to enter the respective value for Smallest Particle, Largest Particle & Coarseness of Aggregates and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search