Positive Moment Imposed on Pile Calculator

✖Coefficient of Lateral Load in Positive Moment is the non-dimensional coefficient of lateral load term.ⓘ Coefficient of Lateral Load in Positive Moment [A_m]			+10% -10%
✖Laterally Applied Load is the live load that is applied parallel to the ground.ⓘ Laterally Applied Load [P_h]			+10% -10%
✖Characteristic Pile Length is the length of pile.ⓘ Characteristic Pile Length [T]			+10% -10%
✖Coefficient of Moment term in Positive Moment is the non-dimensional coefficient of lateral load term.ⓘ Coefficient of Moment term in Positive Moment [B_m]			+10% -10%
✖Moment in Soil is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.ⓘ Moment in Soil [M_t]			+10% -10%

✖Moment Positive tries to turn the body in a counter-clockwise direction.ⓘ Positive Moment Imposed on Pile [M_p]

⎘ Copy

👎

Formula

✖

Positive Moment Imposed on Pile

Formula

`"M"_{"p"} = ("A"_{"m"}*"P"_{"h"}*"T")+("B"_{"m"}*"M"_{"t"})`

Example

`"313.8836N*m"=("3.47"*"9.32N"*"2.39m")+("4.01"*"59N*m")`

Calculator

LaTeX

Reset

👍

Download Geotechnical Engineering Formula PDF

Positive Moment Imposed on Pile Solution

STEP 0: Pre-Calculation Summary

Formula Used

Moment Positive = (Coefficient of Lateral Load in Positive Moment*Laterally Applied Load*Characteristic Pile Length)+(Coefficient of Moment term in Positive Moment*Moment in Soil)
M_p = (A_m*P_h*T)+(B_m*M_t)
This formula uses 6 Variables

Variables Used

Moment Positive - (Measured in Joule) - Moment Positive tries to turn the body in a counter-clockwise direction.
Coefficient of Lateral Load in Positive Moment - Coefficient of Lateral Load in Positive Moment is the non-dimensional coefficient of lateral load term.
Laterally Applied Load - (Measured in Newton) - Laterally Applied Load is the live load that is applied parallel to the ground.
Characteristic Pile Length - (Measured in Meter) - Characteristic Pile Length is the length of pile.
Coefficient of Moment term in Positive Moment - Coefficient of Moment term in Positive Moment is the non-dimensional coefficient of lateral load term.
Moment in Soil - (Measured in Joule) - Moment in Soil is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Lateral Load in Positive Moment: 3.47 --> No Conversion Required
Laterally Applied Load: 9.32 Newton --> 9.32 Newton No Conversion Required
Characteristic Pile Length: 2.39 Meter --> 2.39 Meter No Conversion Required
Coefficient of Moment term in Positive Moment: 4.01 --> No Conversion Required
Moment in Soil: 59 Newton Meter --> 59 Joule (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_p = (A_m*P_h*T)+(B_m*M_t) --> (3.47*9.32*2.39)+(4.01*59)

Evaluating ... ...

M_p = 313.883556

STEP 3: Convert Result to Output's Unit

313.883556 Joule -->313.883556 Newton Meter (Check conversion here)

FINAL ANSWER

313.883556 ≈ 313.8836 Newton Meter <-- Moment Positive

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Pile Foundations » Laterally Loaded Vertical Piles » Positive Moment Imposed on Pile

Credits

Created by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has created this Calculator and 200+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< 7 Laterally Loaded Vertical Piles Calculators

Lateral Deflection of Pile with Head Free to Move

Go Lateral Deflection = ((Coefficient Ay*Laterally Applied Load*(Characteristic Pile Length^3))/Stiffness Of Pile)+((Coefficient By*Moment in Soil*(Characteristic Pile Length^2))/Stiffness Of Pile)

Negative Moment Imposed on Pile

Go Moment Negative = ((Coefficient Aϑ*Lateral Load*Characteristic Pile Length)/Coefficient Bϑ)-((Angle of Rotation*Stiffness Of Pile)/(Coefficient Bϑ*Characteristic Pile Length))

Lateral Deflection for Fixed Head Pile Case

Go Lateral Deflection Fixed Head = ((Laterally Applied Load*(Characteristic Pile Length)^3)/Stiffness Of Pile)*(Coefficient Ay-((Coefficient Aϑ*Coefficient By)/Coefficient Bϑ))

Positive Moment Imposed on Pile

Go Moment Positive = (Coefficient of Lateral Load in Positive Moment*Laterally Applied Load*Characteristic Pile Length)+(Coefficient of Moment term in Positive Moment*Moment in Soil)

Pile Stiffness given Characteristic Pile Length for Laterally Loaded Piles

Go Stiffness Of Pile = ((Characteristic Pile Length)^2)*Coefficient of Horizontal Subgrade

Characteristic Pile Length for Laterally Loaded Vertical Piles

Go Characteristic Pile Length = (Stiffness Of Pile/Coefficient of Horizontal Subgrade)^0.5

Horizontal Subgrade Reaction Coefficient given Characteristic Pile Length

Go Coefficient of Horizontal Subgrade = Stiffness Of Pile/(Characteristic Pile Length)^2

Positive Moment Imposed on Pile Formula

What is Positive Moment?

Positive moment is the reaction induced in a structural element when an external force or moment is applied to the element, causing the element to bend in a counter-clockwise direction.

How to Calculate Positive Moment Imposed on Pile?

Positive Moment Imposed on Pile calculator uses Moment Positive = (Coefficient of Lateral Load in Positive Moment*Laterally Applied Load*Characteristic Pile Length)+(Coefficient of Moment term in Positive Moment*Moment in Soil) to calculate the Moment Positive, The Positive Moment Imposed on Pile is defined as the total positive bending moment which is equal to the sum of the pile reaction times its distance to the column face. Moment Positive is denoted by M_p symbol.

How to calculate Positive Moment Imposed on Pile using this online calculator? To use this online calculator for Positive Moment Imposed on Pile, enter Coefficient of Lateral Load in Positive Moment (A_m), Laterally Applied Load (P_h), Characteristic Pile Length (T), Coefficient of Moment term in Positive Moment (B_m) & Moment in Soil (M_t) and hit the calculate button. Here is how the Positive Moment Imposed on Pile calculation can be explained with given input values -> 313.8836 = (3.47*9.32*2.39)+(4.01*59).

FAQ

What is Positive Moment Imposed on Pile?

The Positive Moment Imposed on Pile is defined as the total positive bending moment which is equal to the sum of the pile reaction times its distance to the column face and is represented as M_p = (A_m*P_h*T)+(B_m*M_t) or Moment Positive = (Coefficient of Lateral Load in Positive Moment*Laterally Applied Load*Characteristic Pile Length)+(Coefficient of Moment term in Positive Moment*Moment in Soil). Coefficient of Lateral Load in Positive Moment is the non-dimensional coefficient of lateral load term, Laterally Applied Load is the live load that is applied parallel to the ground, Characteristic Pile Length is the length of pile, Coefficient of Moment term in Positive Moment is the non-dimensional coefficient of lateral load term & Moment in Soil is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.

How to calculate Positive Moment Imposed on Pile?

The Positive Moment Imposed on Pile is defined as the total positive bending moment which is equal to the sum of the pile reaction times its distance to the column face is calculated using Moment Positive = (Coefficient of Lateral Load in Positive Moment*Laterally Applied Load*Characteristic Pile Length)+(Coefficient of Moment term in Positive Moment*Moment in Soil). To calculate Positive Moment Imposed on Pile, you need Coefficient of Lateral Load in Positive Moment (A_m), Laterally Applied Load (P_h), Characteristic Pile Length (T), Coefficient of Moment term in Positive Moment (B_m) & Moment in Soil (M_t). With our tool, you need to enter the respective value for Coefficient of Lateral Load in Positive Moment, Laterally Applied Load, Characteristic Pile Length, Coefficient of Moment term in Positive Moment & Moment in Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search