Power Flow in SSSC Calculator

✖Maximum Power in UPFC is defined as the control of voltage magnitude and phase angle in both series and shunt modes.ⓘ Maximum Power in UPFC [P_max]			+10% -10%
✖Series Voltage of UPFC is the Unified Power Flow Controller where the voltage in series converter injects into the transmission line to control the line impedance.ⓘ Series Voltage of UPFC [V_se]			+10% -10%
✖Shunt Current of UPFC is defined as the Unified Power Flow Controller (UPFC) is a Flexible AC Transmission System device that provides real and reactive power flow control in transmission systems.ⓘ Shunt Current of UPFC [I_sh]			+10% -10%

✖Power Flow in SSSC is defined as the flow of power in Static Synchronous Series Compensator.ⓘ Power Flow in SSSC [P_sssc]

⎘ Copy

👎

Formula

✖

Power Flow in SSSC

Formula

`"P"_{"sssc"} = "P"_{"max"}+("V"_{"se"}*"I"_{"sh"})/4`

Example

`"1565W"="300W"+("220V"*"23A")/4`

Calculator

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Power Flow in SSSC Solution

STEP 0: Pre-Calculation Summary

Formula Used

Power Flow in SSSC = Maximum Power in UPFC+(Series Voltage of UPFC*Shunt Current of UPFC)/4
P_sssc = P_max+(V_se*I_sh)/4
This formula uses 4 Variables

Variables Used

Power Flow in SSSC - (Measured in Watt) - Power Flow in SSSC is defined as the flow of power in Static Synchronous Series Compensator.
Maximum Power in UPFC - (Measured in Watt) - Maximum Power in UPFC is defined as the control of voltage magnitude and phase angle in both series and shunt modes.
Series Voltage of UPFC - (Measured in Volt) - Series Voltage of UPFC is the Unified Power Flow Controller where the voltage in series converter injects into the transmission line to control the line impedance.
Shunt Current of UPFC - (Measured in Ampere) - Shunt Current of UPFC is defined as the Unified Power Flow Controller (UPFC) is a Flexible AC Transmission System device that provides real and reactive power flow control in transmission systems.

STEP 1: Convert Input(s) to Base Unit

Maximum Power in UPFC: 300 Watt --> 300 Watt No Conversion Required
Series Voltage of UPFC: 220 Volt --> 220 Volt No Conversion Required
Shunt Current of UPFC: 23 Ampere --> 23 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_sssc = P_max+(V_se*I_sh)/4 --> 300+(220*23)/4

Evaluating ... ...

P_sssc = 1565

STEP 3: Convert Result to Output's Unit

1565 Watt --> No Conversion Required

FINAL ANSWER

1565 Watt <-- Power Flow in SSSC

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » FACTS Devices » Static Synchronous Series Compensator(SSSC) » Power Flow in SSSC

Credits

Created by Dipanjona Mallick

Heritage Insitute of technology (HITK), Kolkata

Dipanjona Mallick has created this Calculator and 50+ more calculators!

Verified by Aman Dhussawat

GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI

Aman Dhussawat has verified this Calculator and 100+ more calculators!

< 7 Static Synchronous Series Compensator(SSSC) Calculators

Power Flow of Series Capacitor of Compensated Line

Go Power Flow in Compensated Line = (Sending End Voltage*Receiving End Voltage in Compensated Line)/(2*Natural Impedance in Line*sin(Electrical Length of Line/2)-Series Reactance in Capacitor)*sin(Operating Angle in Compensated Line)

Degree of Series Compensation

Go Degree in Series Compensation = Series Reactance in Capacitor/(Natural Impedance in Line*Electrical Length of Line)

Resonance Frequency for Shunt Capacitor Compensation

Go Resonance Frequency of Shunt Capacitor = Operating System Frequency*sqrt(1/(1-Degree in Shunt Compensation))

Electrical Resonance Frequency for Series Capacitor Compensation

Go Resonance Frequency of Series Capacitor = Operating System Frequency*sqrt(1-Degree in Series Compensation)

Power Flow in SSSC

Go Power Flow in SSSC = Maximum Power in UPFC+(Series Voltage of UPFC*Shunt Current of UPFC)/4

Series Reactance of Capacitors

Go Series Reactance in Capacitor = Line Reactance*(1-Degree in Series Compensation)

Rating of SSSC

Go SSSC Rating = Maximum Current in SSSC*Maximum Inductive Reactive Voltage

Power Flow in SSSC Formula

Power Flow in SSSC = Maximum Power in UPFC+(Series Voltage of UPFC*Shunt Current of UPFC)/4
P_sssc = P_max+(V_se*I_sh)/4

How Power Flow in SSSC is related to UPFC?

The Static Synchronous Series Compensator (SSSC) and the Unified Power Flow Controller (UPFC) are both Flexible AC Transmission System (FACTS) devices used to control and enhance the performance of power transmission systems. Therefore Power flow is determined by the magnitude of series and shunt compensation. Here, both SSSC and UPFC can influence power flow in a transmission line by controlling line impedance.

How to Calculate Power Flow in SSSC?

Power Flow in SSSC calculator uses Power Flow in SSSC = Maximum Power in UPFC+(Series Voltage of UPFC*Shunt Current of UPFC)/4 to calculate the Power Flow in SSSC, The Power Flow in SSSC formula is used to control both real and reactive power flow on a transmission line and to make UPFC a versatile device for optimizing power flow and voltage profiles in a power system. Power Flow in SSSC is denoted by P_sssc symbol.

How to calculate Power Flow in SSSC using this online calculator? To use this online calculator for Power Flow in SSSC, enter Maximum Power in UPFC (P_max), Series Voltage of UPFC (V_se) & Shunt Current of UPFC (I_sh) and hit the calculate button. Here is how the Power Flow in SSSC calculation can be explained with given input values -> 1565 = 300+(220*23)/4.

FAQ

What is Power Flow in SSSC?

The Power Flow in SSSC formula is used to control both real and reactive power flow on a transmission line and to make UPFC a versatile device for optimizing power flow and voltage profiles in a power system and is represented as P_sssc = P_max+(V_se*I_sh)/4 or Power Flow in SSSC = Maximum Power in UPFC+(Series Voltage of UPFC*Shunt Current of UPFC)/4. Maximum Power in UPFC is defined as the control of voltage magnitude and phase angle in both series and shunt modes, Series Voltage of UPFC is the Unified Power Flow Controller where the voltage in series converter injects into the transmission line to control the line impedance & Shunt Current of UPFC is defined as the Unified Power Flow Controller (UPFC) is a Flexible AC Transmission System device that provides real and reactive power flow control in transmission systems.

How to calculate Power Flow in SSSC?

The Power Flow in SSSC formula is used to control both real and reactive power flow on a transmission line and to make UPFC a versatile device for optimizing power flow and voltage profiles in a power system is calculated using Power Flow in SSSC = Maximum Power in UPFC+(Series Voltage of UPFC*Shunt Current of UPFC)/4. To calculate Power Flow in SSSC, you need Maximum Power in UPFC (P_max), Series Voltage of UPFC (V_se) & Shunt Current of UPFC (I_sh). With our tool, you need to enter the respective value for Maximum Power in UPFC, Series Voltage of UPFC & Shunt Current of UPFC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search