Pressure in Liquid Droplet Solution

STEP 0: Pre-Calculation Summary
Formula Used
Pressure = 4*Surface Tension/Diameter of Droplet
Pexcess = 4*σ/d
This formula uses 3 Variables
Variables Used
Pressure - (Measured in Pascal) - Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Surface Tension - (Measured in Newton per Meter) - Surface tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.
Diameter of Droplet - (Measured in Meter) - Diameter of droplet is the length of the longest chord of the liquid droplet.
STEP 1: Convert Input(s) to Base Unit
Surface Tension: 72.75 Newton per Meter --> 72.75 Newton per Meter No Conversion Required
Diameter of Droplet: 121 Centimeter --> 1.21 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Pexcess = 4*σ/d --> 4*72.75/1.21
Evaluating ... ...
Pexcess = 240.495867768595
STEP 3: Convert Result to Output's Unit
240.495867768595 Pascal --> No Conversion Required
FINAL ANSWER
240.495867768595 240.4959 Pascal <-- Pressure
(Calculation completed in 00.004 seconds)

Credits

Created by Shareef Alex
velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada
Shareef Alex has created this Calculator and 100+ more calculators!
Verified by Pratibha
Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India
Pratibha has verified this Calculator and 50+ more calculators!

5 Inside Pressure Calculators

Pressure Inside Liquid Drop
Go Pressure change new = (4*Surface Tension)/(Diameter of Droplet)
Pressure Inside Soap Bubble
Go Pressure change new = (8*Surface Tension)/(Diameter of Droplet)
Pressure in Liquid Jet
Go Pressure in liquid jet = 2*Surface Tension/Diameter of jet
Pressure in Liquid Droplet
Go Pressure = 4*Surface Tension/Diameter of Droplet
Pressure in Excess of Atmospheric Pressure
Go Pressure = Specific weight of liquid*Height

Pressure in Liquid Droplet Formula

Pressure = 4*Surface Tension/Diameter of Droplet
Pexcess = 4*σ/d

What is the pressure inside a liquid drop?



Excess pressure inside a liquid drop

The molecules on the surface of the drop experience a resultant force acting inwards due to surface tension. Therefore, the pressure inside the drop must be greater than the pressure outside it.

what is a liquid droplet?

A drop or droplet is a small column of liquid, bounded completely or almost completely by free surfaces. A drop may form when liquid accumulates at the lower end of a tube or other surface boundary, producing a hanging drop called a pendant drop.

How to Calculate Pressure in Liquid Droplet?

Pressure in Liquid Droplet calculator uses Pressure = 4*Surface Tension/Diameter of Droplet to calculate the Pressure, The Pressure in liquid droplet formula is defined as a pressure drop is the pressure difference that exists between points in a liquid-carrying network. Pressure is denoted by Pexcess symbol.

How to calculate Pressure in Liquid Droplet using this online calculator? To use this online calculator for Pressure in Liquid Droplet, enter Surface Tension (σ) & Diameter of Droplet (d) and hit the calculate button. Here is how the Pressure in Liquid Droplet calculation can be explained with given input values -> 240.4959 = 4*72.75/1.21.

FAQ

What is Pressure in Liquid Droplet?
The Pressure in liquid droplet formula is defined as a pressure drop is the pressure difference that exists between points in a liquid-carrying network and is represented as Pexcess = 4*σ/d or Pressure = 4*Surface Tension/Diameter of Droplet. Surface tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side & Diameter of droplet is the length of the longest chord of the liquid droplet.
How to calculate Pressure in Liquid Droplet?
The Pressure in liquid droplet formula is defined as a pressure drop is the pressure difference that exists between points in a liquid-carrying network is calculated using Pressure = 4*Surface Tension/Diameter of Droplet. To calculate Pressure in Liquid Droplet, you need Surface Tension (σ) & Diameter of Droplet (d). With our tool, you need to enter the respective value for Surface Tension & Diameter of Droplet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Pressure?
In this formula, Pressure uses Surface Tension & Diameter of Droplet. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Pressure = Specific weight of liquid*Height
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!