Pressure Intensity on under side of Base Plate Calculator

✖Axial Compressive Load on Column is a type of force that is applied along the axis, or central line, of a structural element such as a column.ⓘ Axial Compressive Load on Column [P_Column]			+10% -10%
✖Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length.ⓘ Effective Width of Horizontal Plate [a]			+10% -10%
✖Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.ⓘ Length of Horizontal Plate [L_Horizontal]			+10% -10%

✖Pressure Intensity on Under Side of Base Plate refers to the amount of pressure acting on a given area or surface.ⓘ Pressure Intensity on under side of Base Plate [w]

⎘ Copy

👎

Formula

✖

Pressure Intensity on under side of Base Plate

Formula

`"w" = "P"_{"Column"}/("a"*"L"_{"Horizontal"})`

Example

`"0.430755N/mm²"="5580N"/("102mm"*"127mm")`

Calculator

LaTeX

Reset

👍

Download Lug or Bracket Support Formulas PDF PDF Image

Pressure Intensity on under side of Base Plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate)
w = P_Column/(a*L_Horizontal)
This formula uses 4 Variables

Variables Used

Pressure Intensity on Under Side of Base Plate - (Measured in Pascal) - Pressure Intensity on Under Side of Base Plate refers to the amount of pressure acting on a given area or surface.
Axial Compressive Load on Column - (Measured in Newton) - Axial Compressive Load on Column is a type of force that is applied along the axis, or central line, of a structural element such as a column.
Effective Width of Horizontal Plate - (Measured in Meter) - Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length.
Length of Horizontal Plate - (Measured in Meter) - Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.

STEP 1: Convert Input(s) to Base Unit

Axial Compressive Load on Column: 5580 Newton --> 5580 Newton No Conversion Required
Effective Width of Horizontal Plate: 102 Millimeter --> 0.102 Meter (Check conversion here)
Length of Horizontal Plate: 127 Millimeter --> 0.127 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = P_Column/(a*L_Horizontal) --> 5580/(0.102*0.127)

Evaluating ... ...

w = 430754.979157017

STEP 3: Convert Result to Output's Unit

430754.979157017 Pascal -->0.430754979157017 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

0.430754979157017 ≈ 0.430755 Newton per Square Millimeter <-- Pressure Intensity on Under Side of Base Plate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Vessel Supports » Lug or Bracket Support » Pressure Intensity on under side of Base Plate

Credits

Created by Heet

Thadomal Shahani Engineering College (Tsec), Mumbai

Heet has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 14 Lug or Bracket Support Calculators

Maximum Combined Stress on Long Column

Go Maximum Combined Stress = ((Axial Compressive Load on Column/(Number of Columns*Cross Sectional Area of Column))*(1+(1/7500)*(Column Effective Length/Radius of Gyration of Column)^(2))+((Axial Compressive Load on Column*Eccentricity for Vessel Support)/(Number of Columns*Section Modulus of Vessel Support)))

Maximum Compressive Load acting on Bracket

Go Maximum Compressive Load on Remote Bracket = ((4*(Total Wind Force acting on Vessel))*(Height of Vessel above Foundation-Clearance between Vessel Bottom and Foundation))/(Number of Brackets*Diameter of Anchor Bolt Circle)+(Total Weight of Vessel/Number of Brackets)

Thickness of Horizontal Plate Fixed at Edges

Go Thickness of Horizontal Plate = ((0.7)*(Maximum Pressure on Horizontal Plate)*((Length of Horizontal Plate)^(2)/(Maximum Stress in Horizontal Plate fixed at Edges))*((Effective Width of Horizontal Plate)^(4)/((Length of Horizontal Plate)^(4)+(Effective Width of Horizontal Plate)^(4))))^(0.5)

Maximum Combined Stress on Short Column

Go Maximum Combined Stress = ((Axial Compressive Load on Column/(Number of Columns*Cross Sectional Area of Column))+((Axial Compressive Load on Column*Eccentricity for Vessel Support)/(Number of Columns*Section Modulus of Vessel Support)))

Minimum Thickness of Base Plate

Go Minimum Thickness of Base Plate = ((3*Pressure Intensity on Under Side of Base Plate/Permissible Bending Stress in Base Plate Material)*((Greater Projection of Plate beyond Column)^(2)-((Lesser Projection of Plate beyond Column)^(2)/4)))^(0.5)

Thickness of Gusset Plate

Go Thickness of Gusset Plate = (Bending Moment of Gusset Plate/((Maximum Compressive Stress*(Height of Gusset Plate^(2)))/6))*(1/cos(Gusset Plate Edge Angle))

Bending Stress in Column due to Wind Load

Go Bending Stress in Column due to Wind Load = ((Wind Load acting on Vessel/Number of Columns)*(Length of Columns/2))/Section Modulus of Vessel Support

Maximum Compressive Stress Parallel to Edge of Gusset Plate

Go Maximum Compressive Stress = (Bending Moment of Gusset Plate/Section Modulus of Vessel Support)*(1/cos(Gusset Plate Edge Angle))

Pressure Intensity on under side of Base Plate

Go Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate)

Maximum Pressure on Horizontal Plate

Go Maximum Pressure on Horizontal Plate = Maximum Compressive Load on Remote Bracket/(Effective Width of Horizontal Plate*Length of Horizontal Plate)

Axial Bending Stress in Vessel Wall for Unit Width

Go Axial Bending Stress induced in Vessel Wall = (6*Axial Bending Moment*Effective Width of Horizontal Plate)/Vessel Shell Thickness^(2)

Minimum Area by Base Plate

Go Minimum Area provided by Base Plate = Axial Compressive Load on Column/Permissible Bearing Strength of Concrete

Maximum Compressive Stress

Go Maximum Compressive Stress = Stress due to Bending Moment+Compressive Stress due to Force

Maximum Compressive Load on Remote Bracket due to Dead Load

Go Maximum Compressive Load on Remote Bracket = Total Weight of Vessel/Number of Brackets

Pressure Intensity on under side of Base Plate Formula

Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate)
w = P_Column/(a*L_Horizontal)

What is Design Pressure?

Design pressure refers to the maximum pressure that a system, equipment or structure is designed to withstand without experiencing a failure or damage. It is a critical parameter in the design of various types of equipment, such as vessels, pipelines, and valves, as well as buildings and other structures. Design pressure is typically determined by considering various factors such as the operating conditions, the material properties, the potential hazards, and the safety requirements. It is often specified by codes and standards relevant to the specific type of equipment or structure, and failure to meet the required design pressure can result in serious consequences such as leaks, ruptures, and explosions.

How to Calculate Pressure Intensity on under side of Base Plate?

Pressure Intensity on under side of Base Plate calculator uses Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate) to calculate the Pressure Intensity on Under Side of Base Plate, The Pressure Intensity on under side of Base Plate formula is defined as the force per unit area acting perpendicular to the surface of the plate. Pressure Intensity on Under Side of Base Plate is denoted by w symbol.

How to calculate Pressure Intensity on under side of Base Plate using this online calculator? To use this online calculator for Pressure Intensity on under side of Base Plate, enter Axial Compressive Load on Column (P_Column), Effective Width of Horizontal Plate (a) & Length of Horizontal Plate (L_Horizontal) and hit the calculate button. Here is how the Pressure Intensity on under side of Base Plate calculation can be explained with given input values -> 4.3E-7 = 5580/(0.102*0.127).

FAQ

What is Pressure Intensity on under side of Base Plate?

The Pressure Intensity on under side of Base Plate formula is defined as the force per unit area acting perpendicular to the surface of the plate and is represented as w = P_Column/(a*L_Horizontal) or Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate). Axial Compressive Load on Column is a type of force that is applied along the axis, or central line, of a structural element such as a column, Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length & Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.

How to calculate Pressure Intensity on under side of Base Plate?

The Pressure Intensity on under side of Base Plate formula is defined as the force per unit area acting perpendicular to the surface of the plate is calculated using Pressure Intensity on Under Side of Base Plate = Axial Compressive Load on Column/(Effective Width of Horizontal Plate*Length of Horizontal Plate). To calculate Pressure Intensity on under side of Base Plate, you need Axial Compressive Load on Column (P_Column), Effective Width of Horizontal Plate (a) & Length of Horizontal Plate (L_Horizontal). With our tool, you need to enter the respective value for Axial Compressive Load on Column, Effective Width of Horizontal Plate & Length of Horizontal Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search